AIDA GCON-SDI SDI to Genlock SDI/HDMI Converter User Guide

: June 4, 2024
: AIDA

DI to Gen-Lock
SDI/HDMI Converter
GCON-SDI
OPERATION GUIDE

GCON-SDI SDI to Genlock SDI/HDMI Converter

CAUTION:
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
This symbol indicates that dangerous voltage consisting of a risk of electric shock is present within this unit.
PRECAUTION
This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

To prevent damage that may result in fire or electric shock hazards, do not expose this appliance to rain or moisture.

Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could cause fire, electrical shock, or damage to the product.
Incorrectly connecting the power supply or replacing the battery may cause an explosion, cause excessive heat or fire
Do not connect multiple connectors to a single adapter. Exceeding the capacity may cause excessive heat or fire.
Securely plug the power cord into the power receptacle. The insecure connection may cause a fire.
Do not drop the converter to avoid damage or personal injury.
Do not place conductive objects (e.g. screwdrivers, coins, metal items, etc.) or containers ﬁlled with water on top of the converter. Doing so may cause personal injury due to fire, electric shock, or falling objects.
Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.
If any unusual smells or smoke come from the unit, stop using the product. Immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock.
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way.
When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock.

PRECAUTION

Please read this Operation Guide before installing and using the camera & retain this copy for your reference.

Always follow the instructions in the operation guide when applying power. Fire and equipment damage can occur if power is applied incorrectly. For the correct power supply, refer to the specifications page.
Do not use a converter if fumes, smoke or a strange odor is emitted from the camera, or if it seems not functioning correctly. Disconnect the power source immediately and consult with your supplier.
Do not use the converter in extreme environments where high temperatures or high humidity exists. Use the camera under conditions where temperatures are between 32°F ~ and 104°F, and humidity is below 90%.
If installed close to a TV, radio transmitter, magnet, electric motor transformer or audio speakers the magnetic field generated may interfere with or distort the image.
To prevent damage, do not drop the converter or subject it to strong shock or vibration.

GCON-SDI

AIDA GCON-SDI SDI to Genlock SDI HDMI Converter - GCON-
SDI

FEATURES

3G-SDI up to 1080p60 full HD Resolution Input.
Simultaneous HDMI and SDI Loop Output.
Highly compatible with Tri Level reference input SMPTE 292M & 424M Compliant and multi-video format including 59.94Hz.
SMPTE 352M Ancillary Data supported.
Embedded audio pass-through via SDI & HDMI.
Adjustable V-sync & H-sync phases.
Divisional picture comparison.
Built-in Pattern Generator.
Built-in LCD menu screen.
Built-in menu control button.
Versatile, compact, and rugged design.

Entering the main menu Press Enter button three times to enter the main menu.
Change the menu items Use the Right or Left menu to toggle through the menu.
Select or enter the sub-menu Use Enter button.

GEN-LOCK CONT.

GEN ON/OFF
GEN-RUN: [OFF], GEN-RUN: [ON],
CANCEL(BACK)
H_SYNC ADJUST
H_SYNC: 0000, CANCEL(BACK)
V_SYNC ADJUST
V_SYNC: 0000, CANCEL(BACK)
RETURN

PATTERN GEN.

PTN ON/OFF
PATTERN: [OFF], PATTERN: [ON], CANCEL(BACK)
PTN TYPE
PTN WHITE, PTN CROSS, PTN WHITE PTN HATCH
PTN COLOR BAR, PTN WINDOW, PTN H RAMP
PTN WH RAMP, PTN WV RAMP, PTN DIAGONAL
PTN RED, PTN GREEN, PTN BLUE
RETURN

MISC CONT.

AUDIO CONT.
AUDIO ON/ OFF: AUDIO: [OFF], AUDIO: [ON],
CANCEL(BACK) AUDIO BITS: 24 BITS, 20 BITS, 16 BITS, CANCEL(BACK) RETURN
PAYLOAD CONT. : 24 BITS, 20 BITS, 16 BITS, CANCEL(BACK)
PAYLOAD ON/ OFF: PAYLOAD: [OFF], PAYLOAD:
[ON], CANCEL(BACK) RETURN

DISPLAY CONT.

LCD CONT.
LCD BL ON/OFF: LCD [OFF], LCD: [ON], CANCEL(BACK) DISP TYPE: DYNAMIC ], STATIC, CANCEL(BACK) RETURN
HD/3G CONT.
2DIV COMPARE: 2DIV [OFF], 2DIV: [ON]
RETURN
RESET: REST RUN, RETURN
EXIT

GEN-LOCK CONT.

GEN ON/OFF
External reference input can be turned ON or OFF from this menu.
By using the Left or Right button,
Select GEN-RUN[ON] to enable external reference input.
Select GEN-RUN[OFF] to disable external reference input.
Select CANCEL(BACK) to go back to the previous menu.

SDI input signal and reference signal needs to be matched.
H_SYNC ADJUST
H_Sync offset can be adjusted from this menu. By using the Left or Right button,
Select the right offset number on H_SYNC:0000
Press the SELECT button to apply the changes and go back to the previous menu.
V_SYNC ADJUST
V_Sync offset can be adjusted from this menu.
By using the Left or Right button,
Select the right offset number on V_SYNC:0000
Press the SELECT button to apply the changes and go back to the previous menu.
RETURN
Press the SELECT button to Return to the main menu.

ATTERN GEN.

PATTERN ON/OFF
Both SDI and HDMI outputs will generate patterns and input video will be disabled.
When GEN-LOCK is enabled, the generated pattern will contain a gen-lock signal.
By using the Left or Right button,
Select PATTERN[ON] to enable pattern generation.
Select PATTERN[OFF] to disable pattern generation.
Select CANCEL(BACK) to go back to the previous menu.
PATTERN TYPE
The converter provides thirteen different patterns.
By using the Left or Right button,
By using the Left or Right button, select the proper pattern type.