AIDA PTZ-NDI-X12 12x Zoom PTZ Camera User Manual

: June 13, 2024
: AIDA

Table of Contents

Safety Guide
Packing List
Quick Start
Product Highlights
Camera Specs
Camera Interface
IR Remote Controller
OSD MENU
Web Settings
VISCA over IP
Serial Port Configuration
VISCA Protocol
Warranty
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Full-HD Optical Zoom PTZ
PTZ-X12-IP | PTZ-NDI-X12 | PTZ-X20-IP | PTZ-NDI-X20 Manual

V2.1

The information within this manual is subject to change at any time without prior notice*

Safety Guide

Before operation, please read all of the instructions in the manual carefully. For your convenience, please keep this manual.
The camera power input range is 100-240VACv(50-60Hz). Ensure the power supply input is within this rate before powering on.
Camera power voltage = 12VDC,rated currency= 2A.Wesuggestyou use it with the original power supply adapter supplied by the factory.
Please keep the power cable, video cable, and control cable in a safe place and out of obstructions.
0perationalenvironment: 0°C-50°C/32°F-122°F,with humidity levels less than 90%.To avoid any damage, do no put or pour anything inside the camera.
Avoid weight stress, vibration, and pressure on the camera during transportation, storage, and installation.
Do not remove the camera housing or cover. Doing so will void the warranty.
Do not direct the camera towards strong/intensive light. Doing so could cause irreversible damage to the camera and void warranty.
Use a dry and soft cloth to clean the camera housing with a neutral cleaning agent, when needed. To avoid damage on the camera lens, do not use strong or abrasive cleaning agents on the camera housing.
Do not move the camera by moving the camera head. To avoid mechanical trouble, do not rotate the camera head by hand. Please refrain from moving the camera while it is in motion. Doing so could cause irreversible damage to the camera and void warranty.
Make sure the camera is on a fixed and balanced platform. Avoid any slanted placements.
Power Supply Polarity Schematics:

Warning:
Video quality can be affected by specific frequencies of electromagnetic field.
Never grasp the head of the camera. Never move the camera by hand while is in motion. Doing so can damage the mechanism.

Packing List

Check the items below, when opening the package:

1 EA
– AIDA PTZ
– Power Adapter
– Power Cable
– RS-232 Control Cable
– USB 3.0 Cable
– Remote Control
– User Manual
– Double Sided Adhesive
– QC Certification
– Wall Mount

Quick Start

Check that all cable connections are secure before powering on the camera.
Dial Switch Setting (Used for Camera Updates):

Dial Switch

| SW-3| SW-4| Instruction
1| OFF| OFF| Reserve
2| ON| OFF| Reserve
3| OFF| ON| Reserve
4| ON| ON| Reserve
Dial Switch (ARM)

| SW-1| SW-2| Mode
1| OFF| OFF| Updating Mode
2| ON| OFF| Debugging Mode
3| OFF| ON| Undefined
4| ON| ON| Working Mode
Dial Switch (USB)

| SW-5| SW-6| Instruction
1| OFF| OFF| Undefined
2| ON| OFF| Working Mode
3| OFF| ON| Updating Mode
4| ON| ON| Undefined

Product Highlights

Contains an advanced Sony Progressive CMOS Sensor providing 1920×1080 Ultra HD resolution.
Wide angle optical lens: 12x / 20xoptical zoom
Full HD video over IP, via H.264or H.265 encoding.
Contains traditional outputs such as HDMI, SDI, USB3.0, as well as RJ-45 for RTSP/RTMP streaming.
Support line in function, supporting ACC and LPCM audio coding.
Fully adjustable camera settings, such as White Balance, Exposure Settings, and Image Parameters.
Supports P0E: use a single CAT 5/6 cable to control and output video via the RJ-45port.
Fast and precise focusing performance when zooming or moving the camera head.
Smooth PTZ movements, as well as little to no motor sound when moving.
Supports 10presets viaremoteor128presetsviaRS-232oronline interface.
Standard Sony Serial VISCA, IP VISCA protocol, as well as IP VISCA over UDP.
Daisy chain is supported via the RS-232 input and output, controlling a maximum of 7 cameras.
Menu based image parameters, including image flip for ceiling mounted cameras.
Remote has multiple functions, such as fast switching video formats and ability to change IP address.
Free firmware updates to keep the camera up to date with the latest and greatest!
The USB3.0 port is compatible with USB2.0 and allows standard UVC1.5 protocol for local control. UVC control works seamlessly with many well-known conferencing software.
PTZ Menu supports both English and Spanish
Supports NDI® | Hx transmission (PTZ-NDI-X12 and PTZ-NDI-X20) only.

Camera Specs

Video Format

| ****

HDMI (V 1.4)

| 1920 x 1080 60p/59.94p/50p/30p/29.97p/25p/24p/23.98

1920 x 1080 60i/59.94i/50i

1280 x 720 60p/59.94p/50p/30p/29.97p/25p

---|---|---

SDI

| 1920 x 1080 60p/59.94p/50p/30p/29.97p/25p/24p/23.98

1920 x 1080 60i/59.94i/50i

1280 x 720 60p/59.94p/50p/30p/29.97p/25p

USB

| 1920 x 1080 60p/50p/30p/25p (USB 3.0)

1280 x 720 60p/50p/30p (USB 3.0)

1280x72025p(USB3.0&2.0)

1024×576 30p(USB3.0 & 2.0)

960 x 540 30p (USB 2.0)

640 x 360 30p (USB 2.0)
512 x 28830p (USB 2.0)
RJ-45| 1920 x 1080 @ 1~60 1280x 720 @ 1~60 (Main Stream)

1280×720@1~60/1027×576@1~60(SubStream)

Camera Interface

1. Camera Lens
2. Camera Base
3. IR Receiver Panel
4. Power/Tally Light
5. DialSwitch(Firmware)| 6. 1/4″TripodScrewHole
7. Installation Hole
8. RS-232Control Port(Input)
9. RS-232 Control Port(0utput)
10. HDMI Port| 11. Line in Port
12. 3G-SDI Port
13. USB Port
14. RJ-45 Port
15. DC12V Plug
---|---|---

Camera Dimensions (in mm)

IR Remote Controller

Power
When powered on,pressing the power key enters standby mode; Pressing it again will start up the camera and display normally.
Freeze (No Function)
The Freeze button has no function on the PTZ.
IRT (IR Transfer/IR Pass)
Enables IR transfer. 0nce pressed, the camera will receive and pass IR remote control signal (via VISCA IN Port).

SET 1~4 Address Setting
Hold the SET# button for 3 seconds to set the cameras IR address.
CAM 1~4 (Camera selecting)
Pressing the CAM# button will enable IR control of the selected camera.

Number Key (1-9)
Set Preset: To set preset, hold down a key (0-9) and wait 3 seconds.
0ncecomplete, the selected preset will be saved.
Run Preset: Pressing a key (0-9)will bring up the corresponding saved preset.
CLR PRE (Clear Preset)
Clear a Preset :Press CLRPRE and key (0-9)simultaneously to remove the corresponding saved preset.
Clear all Presets: Hold down CLRPRE button to remove all saved presets.
Learn
This button is used with other remote buttons. It has no function when pressed alone.

Focus Key (+/-)
Allows for precise focus change. Manual focus mode must be enabled to use these keys.
Zoom Key (+/-)
0ptically zooms the camera in up to 12x.
Navigate Key (Up/Down/Left/Right)
Normal mode: Allows for the camera head to pan and tilt. Menu mode: Allows for direction in the menu of the camera.
OK/Home Key
Normal mode: Recalls to the home position of the camera.
Menu mode: Used to set functions in the menu and activate features.

Limit L
Press this key with the Learn key to set the max left position of the camera.
Limit R
Press this key with the Learn key to set the max right position of the camera.
LMT CLR
Press this key with the Learn key to remove set max positions.

Video Format Keys:
While directly pointing at the camera, please hold the desired video output button for 3 seconds. If done properly, the PTZ will do a quick reset to the desired video output selected.

When the camera is on, press the MENU key on the IR remote controller to enter the OSD Menu.
After entering the main menu, use the UP/ Down navigate keys on the controller to select the main menu. As you scroll through the menu,the selection will be highlighted in blue.
Press the RIGHT navigate key to enter the highlighted sub menu. Use the UP/DOWN navigate keys to select within the sub menu. Use the LEFT/RIGHT navigate keys to enable or disable parameters.
To return to the previous menu, you need to press return in the sub menu or MENU on the remote.
To fully leave the menu, press the MENU key again.
OSD Menu Setting List:

PTZF

| FOCUS MODE| AUTO/MANUAL: Ability to change from auto or manual focus| DEFAULT: AUTO
---|---|---|---

DIGITAL ZOOM

|

ON/OFF: Ability to digitally zoom 2X. (PTZ-X12-IP | PTZ-NDI-X12 only)

|

DEFAULT: OFF

RETURN

|

Return to previous menu.

|
EXPOSURE MODE| AUTO/MANUAL/BRIGHT/SHUTTER/IRIS: Choose the current Exp. Mode|

DEFAULT: AUTO

EXPOSURE

|

SHUTTER

| Set shutter speed. 1/30-1/10000: Allows for tuning of the shutter speed| DEFAULT: AUTO
IRIS| Set Iris: CLOSE-F1.8: Allows for tuning of the Iris opening.| DEFAULT: AUTO

GAIN

|

Set gain: 0dB-28dB: Allows for tuning the gain of the camera

|

DEFAULT: AUTO

BRIGHTNESS| Set brightness: 0-15: Allows for tuning the brightness of the camera| DEFAULT: AUTO

FLICK

|

Allows for adjustment of the flickerless options on the camera

|

DEFAULT: 50Hz

BLACKLIGHT| Allows for the enabling of the blacklight or not.| DEFAULT: OFF

GAMMA

|

Allows setting changes for the Gamma option of the camera

|

DEFAULT: 0

RETURN| Return to previous menu|

IMAGE

| WB MODE| AUTO/INDOOR/OUTDOOR/PUSH/ATW/MANUAL/SODIUM| DEFAULT: ATW

BLUE

|

Set red gain level: 0-255 (Allows for precise tuning of the blue setting)

|

DEFAULT: AUTO

RED| Set blue gain level: 0-255 (Allows for precise tuning of the red setting)| DEFAULT: AUTO

DEFOG

|

Set defog level: This setting allows you to clear up the hazy images

|

DEFAULT: 0

MIRROR

|

ON/OFF: Makes the image flip on the vertical plane

|

DEFAULT: OFF

FLIP

|

ON/OFF: (optional) Makes the image flip on the horizontal plane

|

DEFAULT: OFF

QUALITY

WDR

|

ON/OFF: Enables better to light and dark images

|

DEFAULT: OFF

WDR LEVEL| 1-6: Enables more control of WDR| DEFAULT: 1

RETURN

|

Return to previous menu

|

FORMAT

| SIZE| 1080p/1080i/720p (default resolution: 1080 30p)|

After selecting format, press OK to switch format.

FRAME RATE

|

60/59.94/50/30/29.97/25/24/23.98

RETURN| Return to previous menu

SYSTEM

LANGUAGE/IDIOMA

|

Set language: ENGLISH/SPANISH

|

DEFAULT: ENG

DHCP| IP address automatic acquisition switch: ON/OFF| DEFAULT: OFF
IP| Set camera IP| 192.168.1.188

NET MASK

|

Set camera net mask

|

255.255.255.0

GATEWAY| Set camera gateway| 192.168.1.1

RETURN

|

Return to previous menu

|

INFO

| IP ADDRESS| Display the current IP address

RTSP URL

|

Display the current main stream RTSP URL

F/W VERSION| Display the current ISP firmware version
ARM VERSION| Display the current ARM firmware version
FPGA VERSION| Display the current FPGA firmware version
USB VERSION| Display the current USB firmware version

RESET

Web Settings

The cameras web interface supports Google Chrome, Firefox, IE, Safari, 0pera, and other major browsers.

Login
0pen your browser and in the address bar, type in the camera’s default IP address: 192.168.1.188 (If that doesn’t work please check in the camera’s menu to see the actual IP address under INF0) Next, enter the username and password. The default for both is admin.
Real-time Preview
When logging in, you will see the realtime preview of the camera. As seen, the control interface is on the right. You can control the camera’s movements with the movement pad at the top, as well as control zoom and focus. You can also set the movement, focus, and zoom speed, as well being able to control your presets.
Parameter Settings
Click “Setting” to enter the parameter setting interface as seen below:

Under “Video Encode”, you can enable the RTSP/RTMP streams for both the main and sub streams. You may also change the Encode mode, choosing betweenH.264orH.265.Lastly, you can change the framerate and bitrate for each stream on this menu.

“RTMP Setting” allows you to directly stream to many social platforms such as Youtube & Facebook Live.
Here you can place the RTMP address, as well as enable the RTMP stream. To do this, you must: 1st: First obtain the live RTMP address (for youtube, it is rtmp://a.rtmp.youtube.com/live2). You will also need your stream key.
2nd: Place the live RTMP address in the Main RTMP address box.
3rd: Next, ensure that there is a forward slash (/)after the RTMP address. If there is already a forward slash, please skip this step.
4th: Lastly, paste your stream key after the forward slash (/).
5th: Click Save.
0nce you complete these steps, your PTZ will immediately start uploading to your social platforms channel. You will see a blue checkmark next to the RTMP state, which will show if your RTMP address is correctly inputted. No reboot required!
Custom RTMP stream keys also allows you to make your own RTMP address and pull that stream from other programs. If you are stuck on any of these steps, contact our support. They will be glad to assist you in any problems you may encounter.

For NDI versions, you will also see the NDI on and off button here.
In the “audio settings” tab, audio can be turned off or on. You are also able to adjust the encode mode, samplerate, and bitrate.

“Image Parameter” is the online version of the OSD Menu. You can change the same settings via browser.

“Ethernet” allows for fine tuning if the IP portion of the camera. You can enable DHCP for auto IP configuration.

DHCP	OFF	DNS	192.168.1.1
IP Address	192.168.1.188	HTTP Port	80
Netmask	255.255.255.0	RTSP Port	554
Gateway	192.168.1.1

To upgrade the firmware on our PTZ, head over to our website at aidaimaging.com/download and look for the latest PTZ firmware.
The “Reset to default” portion allows you to factory reset image parameter reset, or reboot the camera.
Simple Reset: 0nlyresets customizable camera options: AE, WB, Image Effects, etc.
Complete Reset: Factory resets the camera, including the IP address Reboot: Reboot ISP portion of the camera.

“Account Settings” is used to change the log in for the account. You can change the username and password here.

VISCA over IP

The AIDA PTZ’s use VISCA over IP protocol to reliably send and receive information from IP controllers.
Communication port specs:

Control port: RJ-45 Gigabit LAN
IP Protocol:IPv4
Transmit Protocol: UDP
IP address: Default 192.168.1.188 (Check OSD Menu)
Port address:52381
Confirm send/transmission control: Depends on software

What is VISCA over IP?
VISCA commands are the communication between the controller and the camera. These commands are sent via UDP on the network. Since UDP transmission isn’t that stable, a couple of steps must happen before a movement is executed. The controller first sends out a VISCA command. The camera equipment then receives the VISCA command and returns that message back to the controller. 0ncethe commands are executed, the action will follow suit and the message will be complete. Each VISCA command controls its own setting, so there are no overlaps in existing commands.
VISCA IN (RS-232 Port)

VISCA IN & Mini DIN Connection

Camera VISCA IN	Mini DIN
1	DTR
2	DSR
3	TXD
4	GND
5	RXD
6	A(+)
7	IR OUT
8	B(-)

VISCA IN & DB9 Connection

Camera VISCA IN	Windows DB9
1	DTR
2	DSR
3	TXD
4	GND
5	RXD
6	A(+)
7	IR OUT
8	B(-)

Serial Port Configuration

Parameter	Value	Parameter	Value
Baud Rate	2400/4800/9600/115200	Stop Bit	1 Bit
Start Bit	1 Bit	Check Bit	None
Date Bit	8 Bit

VISCA Protocol

Part 1: Camera Return Command

ACK/Completion Message

|

Command Packet

|

Note

ACK

|

z0 41 FF

|

Returned when the command is accepted

Completion

|

z0 51 FF

|

Returned when the command has been executed

z= camera address +8

Error Messages

|

Command Packet

|

Note

Syntax Error

|

z0 60 02 FF

|

Returned when the command format is different orwhen a command with illegal command parameters is accepted

Command Not Executable

|

z0 61 41 FF

|

Returned when the command cannot be executed due to current conditions. For example, when commands controlling the focus manually are received during auto focus.

Part 2: Camera Control Command

AddressSet	Broadcast	88 30 01 FF	Address setting
IF_Clear	Broadcast	88 01 00 01 FF	I/F Clear

CommandCancel

| | 8x 21 FF|

CAM_Power

|

On

|

8x 01 04 00 02 FF

|

Power ON/OFF

Off| 8x 01 04 00 03 FF

CAM_Zoom

| Stop| 8x 01 04 07 00 FF|

Tele(Standard)

|

8x 01 04 07 02 FF

Wide(Standard)

|

8x 01 04 07 03 FF

Tele(Variable)

| 8x 01 04 07 2p FF|

p=0(low)~7(high)

Wide(Variable)

| 8x 01 04 07 3p FF

Direct

|

8x 01 04 47 0p 0q 0r 0s FF

|

pqrs: Zoom Position (0 (wide)~0x4000(tele))

Direct with speed| 8x 0A 04 47 0t 0p 0q 0r 0s FF| t: spd 0~7

pqrs: Zoom Position (0(wide)`0x4000(tele))

CAM_DZoom

| ON| 8x 01 04 06 02 FF|

OFF

|

8x 01 04 06 03 FF

Combine Mode

|

81 01 04 36 00 FF

|

Combine with optical zoom control

Separate Mode| 81 01 04 36 01 FF| Separate with optical zoom control

CAM_DZoom

| Stop| 81 01 04 06 00 FF| Enable in separate mode
---|---|---|---
Tele(Variable)| 81 01 04 06 2p FF| Enable in separate mode
Wide(Variable)| 81 01 04 06 3p FF| Enable in separate mode
Direct| 81 01 04 46 0p 0q 0r 0s FF| Enable in separate mode

CAM_Focus

| Stop| 8x 01 04 08 00 FF|
Far(Standard)| 8x 01 04 08 02 FF

Near(Standard)

|

8x 01 04 08 03 FF

Far(Variable)| 81 01 04 08 2p FF|

p=0 (Low) to 7 (High)

Near (Variable)

|

81 01 04 08 3p FF

|

p=0 (Low) to 7 (High)

Direct| 8x 01 04 48 0p 0q 0r 0s FF| pqrs: Focus Position

Auto Focus

|

81 01 04 38 02 FF

CAM_WB

|

Auto

|

8x 01 04 35 00 FF

|
Indoor| 8x 01 04 35 01 FF

Outdoor

|

8x 01 04 35 02 FF

One Push

|

8x 01 04 35 03 FF

ATW

|

8x 01 04 35 04 FF

Manual

|

8x 01 04 35 05FF

Sodium lamp

|

8x 01 04 35 08 FF

Flourescent

|

8x 01 04 35 09 FF

One Push Trigger| 8x 01 04 10 05 FF

CAM_RGain

|

Reset

|

8x 01 04 03 00 FF

|

Manual Control of RGain

Up

|

8x 01 04 03 02 FF

Down

|

8x 01 04 03 03 FF

Direct

| 8x 01 04 43 00 00 0p 0q FF| pq: RGain (0~0xFF)

CAM_BGain

|

Reset

| 8x 01 04 04 00 FF|

Manual Control of BGain

Up

| 8x 01 04 04 02 FF

Down

|

8x 01 04 04 03 FF

Direct

|

8x 01 04 44 00 00 0p 0q FF

|

pq: BGain (0-0xFF)

CAM_AE

| Full Auto| 81 01 04 39 00 FF| Automatic Exposure mode
---|---|---|---
Manual| 81 01 04 39 03 FF| Manual Control mode
Shutter Priority| 81 01 04 39 0A FF| Shutter Priority

Automatic Exposure mode

Iris Priority| 81 01 04 39 0B FF| Iris Priority Automatic Exposure mode
Bright| 81 01 04 39 0D FF| Bright Mode (Manual control)

CAM_Shutter

| Reset| 8x 01 04 0A 00 FF|

Shutter Setting

Up

|

8x 01 04 0A 02 FF

Down| 8x 01 04 0A 03 FF

Direct

|

8x 01 04 4A 00 00 0p 0q FF

|

pq: Shutter Position (0~0x15)

CAM_Iris

| Reset| 8x 01 04 0B 00 FF|

Iris Setting (0~0x0D)

Up

|

8x 01 04 0B 02 FF

Down| 8x 01 04 0B 03 FF
Direct| 8x 01 04 4B 00 00 0p 0q FF| pq: Iris Position (0~0x0D)

CAM_Gain

| Reset| 8x 01 04 0C 00 FF|

Gain Setting (0~0x0E)

Up

|

8x 01 04 0C 02 FF

Down| 8x 01 04 0C 03 FF

Direct

|

8x 01 04 0C 00 00 0p 0q FF

|

pq: Gain Position (0~0x0E)

CAM_Bright

|

Reset

|

8x 01 04 0D 00 FF

|

Bright Setting

Up

|

8x 01 04 0D 02 FF

Down

|

8x 01 04 0D 03 FF

Direct

|

8x 01 04 4D 00 00 0p 0q FF

| pq: Bright Position (0~0x1B)

CAM_ImageBright

|

Direct

|

8x 01 04 A4 00 00 0p 0q FF

| pq: Image Bright Position (0~0x0F) AE_AUTO/AE_SHUTTER/AE_IRIS

CAM_WDR

| On| 8x 01 04 3D 02 FF|

Exposure Compensation ON/OFF

Off

|

8x 01 04 3D 03 FF

Direct

|

8x 01 04 D3 pq FF

|

pq: ExpComp Position (0~0x6)

CAM_Backlight (BLC)

|

On

|

8x 01 04 33 02 FF

|

Blacklight On

Off

| 8x 01 04 33 03 FF| Blacklight Off

CAM_Sharpness

|

Reset

| 8x 01 04 02 00 FF|

Aperture Control

Up

| 8x 01 04 02 02 FF

Down

|

8x 01 04 02 03 FF

Direct

|

8x 01 04 42 00 00 0p 0q FF

|

pq: Aperture Gain (0~0x0F)

CAM_Memory (preset)

| Reset| 8x 01 04 3F 00 0p FF|

p: Preset Number (=0 to 128)

Corresponds to 0-9 on the remote controller

---|---|---|---
Set| 8x 01 04 3F 01 0p FF
Recall| 8x 01 04 3F 02 0p FF

CAM_LR_Reverse

| On| 8x 01 04 61 02 FF|

Image Flip Horizontal On/Off

Off| 8x 01 04 61 03 FF

CAM_PictureFlip

| On| 8x 01 04 66 02 FF|

Image Flip Horizontal On/Off

Off

|

8x 01 04 66 03 FF

CAM_RS485Ctl

| On| 8x 01 06 A5 02 FF|

Off

|

8x 01 06 A5 03 FF

CAM_Saturation| Saturation| 8x 01 04 A1 00 00 0p 0q FF| pq: Saturation Level 0x00~0xff

CAM_Contrast

|

Contrast

|

8x 01 04 A2 00 00 0p 0q FF

| pq: Contrast Level 0x00~0xff

CAM_SpeedByZoom

CAM_ZoomSpeed

|

Zoom Speed

|

8x 01 04 D1 00 00 0p 0q FF

|

pq: Zoom Speed 0x01~0x07

CAM_ZoomDisplay

| On| 8x 01 06 C2 02 FF|

Off

|

8x 01 06 C2 03 FF

CAM_IRaddress

|

IR address

|

8x 01 06 D8 0p FF

|

p: IR address1~4

CAM_Gamma|

Gamma set

|

81 01 04 5B 0p FF

|

p: Gamma No. (0~4)

CAM_ColorGain

|

Direct

|

8x 01 04 49 00 00 00 0p FF

|

(0~0x0E)

CAM_2DNR

|

Direct

|

8x 01 04 A5 0p FF

| (0~0x1)

CAM_3DNR

|

Direct

|

8x 01 04 53 0p FF

|

(0~0x05)

FLICK

| 50Hz| 81 01 04 23 01 FF|

60Hz

|

81 01 04 23 02 FF

OFF

|

81 01 04 23 00 FF

VideoSystem Set (AIDA)

| |

8x 01 06 35 00 pp FF

| pp: Video Format:

1080P60 0x00

1080P50 0x01

1080I60 0x02

1080I50 0x03

1080P30 0x 04

1080P25 0x05

720P60 0x 06

720P50 0x07

720P30 0x08

720P25 0x09

1080P5994 0x0E

1080I5994 0x0F

1080P2997 0x10

720P5994 0x13

720P2997 0x14

1080P24 0x11

1080P2398 0x12

---|---|---|---

VideoSystem Set (Sony)

| |

81 01 04 24 72 0p 0q FF

| pp: Video Format:

1080P60 0x2e

1080P50 0x2f

1080I60 0x01

1080I50 0x04

1080P30 0x06

1080P25 0x08

720P60 0x09

720P50 0x0c

720P30 0x0e

720P25 0x11

1080P5994 0x13

1080I5994 0x02

1080P2997 0x07

720P5994 0x0a

720P2997 0x0f

1080P24 0x2a

1080P2398 0x2b

CAM_IDWrite

| |

8x 01 04 22 0p 0q 0r 0s FF

|

pqrs: Camera ID (=0000 to FFFF)

DHCP control

|

DHCP off

|

8x 01 04 AE 00 FF

|

DHCP off

DHCP on

|

8x 01 04 AE 01 FF

| DHCP on

Main Stream

|

Resolution

|

8x 01 04 C2 00 0p 0q 0r 0s 0m 0n 0x 0y FF

| pqrs: Column(x size) mnxy: Line (y size) only support: 1920×1080/1280×720

Rate

|

8x 01 04 C2 01 0p 0q 0r 0s 0m 0n 0x 0y FF

| pqrsmnxy: bitrate (0~15360)

Sub Stream

|

Resolution

|

8x 01 04 C3 00 0p 0q 0r 0s 0m 0n 0x 0y FF

| pqrs : Column(x size) mnxy: Line (y size) only support: 1280×720/1024×576/640×360
Rate| 8x 01 04 C3 01 0p 0q 0r 0s 0m 0n 0x 0y FF| pqrsmnxy: bitrate (0~15360)

Tally Control

|

Off

|

8x 01 7E 01 0A 00 0p FF

| p: 0: OFF(LED off) 1: (LED green on) 2: (LED red on) 4: (LED blue on)

IP address control

|

IP Set

|

8x 01 04 AB 0p 0q 0r 0s 0m 0n 0x 0y FF

|

Set ip to :pq.rs.mn.xy

Mask

|

8x 01 04 AC 0p 0q 0r 0s 0m 0n 0x 0y FF

| Set mask to :pq.rs.mn.xy
Gateway set| 8x 01 04 AD 0p 0q 0r 0s 0m 0n 0x 0y FF| Set gateway to :pq.rs.mn.xy

Color adjust

|

Color Adjust OFF

|

8x 01 04 B6 00 FF

| Color adjust off

Color Adjust ON

| 8x 01 04 B6 01 FF| Color adjust on
Brightness Balance OFF|

8x 01 04 B7 00 FF

|

Keep Brightness

Brightness Balance ON|

8x 01 04 B7 01 FF

|

Don’t Keep Brightness

Color adjust

| Flare red| 8x 01 04 B8 dat FF| Flare mode red value (Default=32)
---|---|---|---
Flare green| 8x 01 04 B9 dat FF| Flare mode green value (Default=32)
Flare blue| 8x 01 04 BA dat FF| Flare mode blue value (Default=32)

SYS_Menu

| Menu On| 8x 01 06 06 02 FF| Turn on menu
Menu Off| 8x 01 06 06 03 FF| Turn off menu
Menu Back| 8x 01 06 06 10 FF| Menu step back

Menu Ok

|

8x 01 7E 01 02 00 01 FF

|

Menu ok

IR_Receive

| On| 8x 01 06 08 02 FF|

IR(remote commander)receive ON/OFF

Off

|

8x 01 06 08 03 FF

On/Off| 8x 01 06 08 10 FF

Pan_TiltDrive

|

Up

|

8x 01 06 01 VV WW 03 01 FF

|

VV: Pan speed 0x01 (low speed) to 0x18 (high speed)

WW: Tilt speed 0x01 (low speed) to 0x14 (high speed)

YYYY: Pan Position(TBD) ZZZZ: Tilt Position(TBD)

Down| 8x 01 06 01 VV WW 03 02 FF
Left| 8x 01 06 01 VV WW 01 03 FF
Right| 8x 01 06 01 VV WW 02 03 FF

Upleft

|

8x 01 06 01 VV WW 01 01 FF

Upright| 8x 01 06 01 VV WW 02 01 FF

Downleft

|

8x 01 06 01 VV WW 01 02 FF

Downright

|

8x 01 06 01 VV WW 02 02 FF

Stop

|

8x 01 06 01 VV WW 03 03 FF

Absolute Position

| 8x 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z

0Z 0Z 0Z FF

Relative Position

| 8x 01 06 03 VV WW 0Y 0Y 0Y 0Y

0Z 0Z 0Z 0Z FF

Home

|

8x 01 06 04 FF

Reset| 8x 01 06 05 FF

Pan Tilt_LimitSet

|

Set

| 8x 01 06 07 00 0W

0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF

| PW: 1: UpRight 0:DownLeft YYYY: Pan Limit Position(TBD) ZZZZ: Tilt Limit Position(TBD)

Clear

| 8x 01 06 07 01 0W

07 0F 0F 0F 07 0F 0F 0F FF

Part 3: Inquiry Command

Command Type	Command	Return	Note

CAM_PowerInq

| ****

8x 09 04 00 FF

| y0 50 02 FF| On

y0 50 03 FF

| ****

Off (Standby)

CAM_ZoomPosInq| 8x 09 04 47 FF| y0 50 0p 0q 0r 0s FF| pqrs: Zoom Position

CAM_Focus ModeInq

| ****

8x 09 04 38 FF

| y0 50 02 FF| Auto Focus
y0 50 03 FF| Manual Foc

us

CAM_FocusPosInq| ****

8x 09 04 48 FF

| y0 50 0p 0q 0r 0s FF| ****

pqrs: Focus Position

CAM_WBModeInq

| ****

8x 09 04 35 FF

| ****

y0 50 00 FF

| ****

Auto

y0 50 01 FF| Indoor Mode
y0 50 02 FF| ****

Outdoor Mode

y0 50 03 FF| OnePush Mode

y0 50 04 FF

| ATW
y0 50 05 FF| ****

Manual

CAM_RGainInq

| ****

8x 09 04 43 FF

| ****

y0 50 00 00 0p 0q FF

| ****

pq: R Grain

CAM_BGainInq| ****

8x 09 04 44 FF

| y0 50 00 00 0p 0q FF| pq: B Grain

CAM_AEModeInq

| ****

8x 09 04 39 FF

| ****

y0 50 00 FF

| ****

Full Auto

y0 50 03 FF| Manual

y0 50 0A FF

| ****

Shutter Priority

y0 50 0B FF

| ****

Iris Priority

y0 50 0D FF

| Bright
CAM_Shutter PosInq| ****

8x 09 04 4A FF

| ****

y0 50 00 00 0p 0q FF

| ****

pq: Shutter Position

CAM_IrisPosInq

| ****

8x 09 04 4B FF

| ****

y0 50 00 00 0p 0q FF

| pq: Iris Position

CAM_GainPosiInq

| ****

8x 09 04 4C FF

| ****

y0 50 00 00 0p 0q FF

| ****

pq: Gain Position

CAM_ BrightPosiInq

| ****

8x 09 04 4D FF

| ****

y0 50 00 00 0p 0q FF

| ****

pq: Bright Position

CAM_ ImageBright PosiInq| ****

8x 09 04 A4 FF

| ****

y0 50 00 00 0p 0q FF

| ****

pq: ImageBright Position

CAM_SaturationInq

| ****

8x 09 04 A1 FF

| ****

y0 50 00 00 0p 0q FF

| ****

pq: Saturation level 0x00~0x0f

CAM_DefogInq

| ****

8x 09 04 A3 FF

| ****

y0 50 0p FF

| ****

p: Defog level 0x00~0x0f

CAM_ContrastInq

| ****

8x 09 04 A2 FF

| ****

y0 50 00 00 0p 0q FF

| ****

pq: Contrast level 0x00~0x0f

CAM_WDRModeInq

| ****

8x 09 04 3D FF

| ****

y0 50 02 FF

| ****

On

y0 50 03 FF

| ****

Off

CAM_WDRPosInq

| ****

8x 09 04 2D FF

| ****

8x 01 04 02 03 FF

| pq: WDR LEVEL Position 1~6

CAM_ApertureInq

| 8x 09 04 42 FF| y0 50 00 00 0p 0q FF| p: Aperture Gain
---|---|---|---

CAM_FlickerInq

| ****

8x 09 04 AA FF

| ****

y0 50 0p FF

| ****

p: Flick mode 0:off 1:50Hz 2:60Hz

CAM_2DNRInq| 8x 09 04 A5 FF| y0 50 0p FF| p: 2DNR: 0=OFF 1= AUTO 2

CAM_3DNRInq

| 8x 09 04 53 FF| ****

y0 50 0p FF

| ****

p: 3DNR: 0=OFF 1= AUTO 2~5=Manual Level

CAM_GammaInq| 8x 09 04 5B FF| y0 50 0p FF| p: Gamma Position

CAM_MemoryInq

| ****

8x 09 04 3F FF

| ****

y0 50 pp FF

| ****

pp: Memory number last operated

SYS_MenuModeInq

| ****

8x 09 06 06 FF

| ****

y0 50 02 FF

| On
| | y0 50 03 FF| Off
CAM_LR_Reverse Inq| 8x 09 04 61 FF| y0 50 02 FF| On
| | y0 50 03 FF| Off

CAM_PictureFlipInq

| ****

8x 09 04 66 FF

| ****

y0 50 02 FF

| ****

On

| | y0 50 03 FF| Off

CAM_IDInq

| ****

8x 09 04 22 FF

| ****

y0 50 0p 0q 0r 0s FF

| ****

pqrs: Camera ID

CAM_DHCPInq| 8x 09 04 AE FF| y0 50 pp FF|

CAM_IPInq

| ****

8x 09 04 AB FF

| ****

y0 50 0p 0p 0q 0q 0r 0r 0s 0s FF

CAM_MASKInq| 8x 09 04 AC FF| y0 50 0p 0p 0q 0q 0r 0r 0s 0s FF

CAM_GATEWAYInq

| ****

8x 09 04 AD FF

| ****

y0 50 0p 0p 0q 0q 0r 0r 0s 0s FF

CAM_FlareModeInq

| ****

8x 09 04 B6 FF

| ****

y0 50 pp FF

CAM_FlareBright ModeInq| ****

8x 09 04 B7 FF

| ****

y0 50 pp FF

CAM_FlareRed

| ****

8x 09 04 B8 FF

| ****

y0 50 pp FF

CAM_FlareGreen

| ****

8x 09 04 B9 FF

| ****

y0 50 pp FF

CAM_FlareBlue

| ****

8x 09 04 BA FF

| ****

y0 50 pp FF

CAM_VersionInq| 8x 09 00 02 FF| y0 50 ab cd mn pq rs tu vw FF
VideoSystemInq (AIDA)| ****

8x 09 06 23 FF

| ****

y0 50 pp FF

| ****

pp: Video position

VideoSystemInq (Sony)| ****

8x 09 04 24 72 FF

| ****

y0 50 0p 0p FF

| ****

pp: Video position

IR_Transfer

| ****

8x 09 06 1A FF

| ****

y0 50 02 FF

| ****

On

y0 50 03 FF| ****

Off

TallyInq

| ****

8x 09 7E 01 0A FF

| ****

y0 50 0p FF

| ****

p: tally state

IR_Receive

| ****

8x 09 06 08 FF

| ****

y0 50 02 FF

| ****

On

y0 50 03 FF| Off
IR_ReceiveReturn| | y0 07 7D 01 04 00 FF| Power ON/OFF

IR_ReceiveReturn

| | ****

y0 07 7D 01 04 00 FF

| ****

Zoom tele/wide

---|---|---|---

y0 07 7D 01 04 07 FF

| ****

AF On/Off

y0 07 7D 01 04 33 FF

| ****

CAM_Backlight

y0 07 7D 01 04 3F FF

| ****

CAM_Memory

y0 07 7D 01 06 01 FF

| ****

Pan_tiltDrive

8x 09 04 C3 00 FF

| ****

y0 50 0p 0q 0r 0s 0m 0n 0x 0y FF

| pqrs : Column(x size) mnxy: Line (y size)

only supports: 1280×720/1024×576/640×360

SubstreamRateInq

| ****

8x 09 04 C3 01 FF

| ****

y0 50 0p 0q 0r 0s 0m 0n 0x 0y FF

| ****

pqrsmnxy: bitrate (0~15360)

Note: [x] refers to camera address; [y] = [x +8] VISCA Pan Tilt Absolute Position Value

Pan Angle

|

VISCA Value

|

Tilt Angle

|

VISCA Value

---|---|---|---

-170

|

0xF670

|

-30

|

0xFE50

-135

|

0xF868

|

0

|

0x0000

-90

|

0xFAF0

|

30

|

0x01B0

-45

|

0xFD78

|

60

|

0x0360

0

|

0x0000

|

90

|

0x510

45

|

0x0288

| |

90

|

0x0510

| |

135

|

0x0798

| |

170

|

0x0990

| |

VISCA Pan Tilt Speed Value

Pan Degree/Second

0

|

0.3

|

0.3

|

.03

1

|

1

|

1

|

1

2

|

1.5

|

1.5

|

1.5

3

|

2.2

|

2.2

|

2.2

4

|

2.4

|

2.4

|

3.6

5

|

2.6

|

2.6

|

4.7

6

|

2.8

|

2.8

|

6

7

|

3.0

|

3.0

|

8

|

3.2

|

3.2

|

10

9

|

3.4

|

3.4

|

12

10

|

3.8

|

3.8

|

15

11

|

4.5

|

4.5

|

18

12

|

6

|

6

|

23

Pan Degree/Second

13

|

9

|

13

|

30

14

|

15

|

14

|

39

15

|

19

|

15

|

48

16

|

25

|

16

|

59

17

|

32

|

17

|

69

18

|

38

|

18

|

80

19

|

45

| |

20

|

58

| |

21

|

75

| |

22

|

88

| |

23

|

105

| |

24

|

120

| |

UVC Control
AIDA PTZ’s also support UVC interface.

PU_BRIGHTNESS_CONTROL	81 01 04 4d 00 00 0p 0q FF
PU_CONTRAST_CONTROL	81 01 04 A2 00 00 0p 0q FF
PU_SATURATION_CONTROL	81 01 04 A1 00 00 0p 0q FF
PU_SHARPNESS_CONTROL	8x 01 04 42 00 00 0p 0q FF
PU_GAMMA_CONTROL	8x 01 04 5B 0p FF
PU_WHITE_BALANCE_TEMPERATURE_CONTRO L	8x 01 04 35 0X FF
PU_BLACKLIGHT_COMPENSATION_CONTROL	81 01 04 33 02/03 FF
PU_POWER_LINE_FREQUENCY_CONTROL	8x 01 04 AA 00/01/02 FF
CT_ZOOM_ABSOLUTE_CONTROL	8x 01 04 47 0p 0q 0r 0s FF
CT_PANTILT_ABSOLUTE_CONTROL	8x 01 06 02 VV WW 0Y 0Y 0Y 0Y OZ OZ 0Z 0Z F
CT_PANTILT_RELATIVE_CONTROL	8x 01 06 01 pp qq rr ss FF
CT_ZOOM_RELATIVE_CONTROL	8x 01 04 07 pp FF

Warranty

AIDA Imaging warrants its cameras and items to be free from defects under normal use. Please refer to our website for more information at: aidaimaging.com/support

Support

If you would like additional support or explanation of anything on this manual, please feel free to go to our FAQ page on our website at aidaimaging.com/support. If you are in need of additional help, or have any general questions, please feel free to contact us in these various ways:
Telephone: 909.333.7421
Email: [email protected]
Website: aidaimaging.com/support
We are open yearly, Mon-Fri 8A.M. to 5P.M. PST, excluding major holidays and events.
Also, keep up to date with firmwares and new releases from AIDA Imaging by signing up for our newsletter!