LYKYL 300 mAh Professional Men Hair Clipper USER MANUAL

: June 3, 2024
: LYKYL

Table of Contents

LYKYL

LYKYL

LYKYL 300 mAh Professional Men Hair Clipper

SPECIFICATION

RECOMMENDED USES FOR PRODUCT: Nose, Beard, Trimming, Shaving, Grooming, Professional
ITEM WEIGHT: 131 Grams
BRAND: LYKYL
MATERIAL: synthetic-fiber
BLADE MATERIAL: Stainless, Carbon, Steel
TARGET AUDIENCE: Men
MATERIAL: plastic, stainless steel
RATED VOLTAGE: 240V ~ 50 / 60Hz
CHARGING TIME: 5 hours
BATTERY CAPACITY: 300 mAh
PRODUCT SIZE: 5 4.3 4.3cm
WEIGHT: 131g

INTRODUCTION

To suit all trimming requirements, this multifunctional trimmer combines the capabilities of haircutting, beard shaving, and nose hair removal. Beards, body, head, and facial hairstyles can be freely designed. If you have the cash for a haircut, you can A hair clipper with three uses is available. Our cutter heads are composed of carbon steel and have a 30° acute angle curved surface that suits the skin, is impervious to rust and jamming, is gentle on the skin, and trims fast and easily. There includes a battery indication to remind you to charge, and the scientific line design makes using it more comfortable. Professional hair accessories include four length limit combs that are easy to use, free to control the limit length, and trim to the nearest millimeter.

WHAT’S IN THE BOX

1 x 3 in 1 electric clipper (hair clipper / shaver / nose hair trimmer)
4 x limit comb (3/6/9/12 mm)
1 x EU charging cable
1 x box
1 x small brush
1 x English manual

HOW IT WORKS

When one blade of the clipper swings sideways in relation to the other, it creates a scissor action that cuts the hair that is positioned between the comb’s teeth. Lowest possible friction between the blades must be achieved, which is done by selecting the right material and finish as well as applying lubricant frequently.

HOW TO STORE CLIPPERS

While you can store your clipper with a blade still attached, it may be advisable to remove the blades and wrap them in an oiled towel to avoid rusting. Spraying your blades with the Andis 5-in-1 cooling spray before storing them will provide them extra protection because it has rust- preventative qualities.

HOW TO FIX CLIPPER NOR CUTTING

Take off the clipper’s blade.
To remove any loose hair that may have accumulated between the blade and the clipper, use a small cleaning brush. To clean in between the blade’s teeth, you can alternatively use a pipe cleaner or index card. The next step is to frequently lubricate your blade.

HOW TO ALIGN BLADES

Just enough to allow you to move the blade, slightly loosen both of the blade screws.
Synchronize the bottom and top blades.
The bottom blade’s first little tooth must be on the extreme left tooth of the top blade.
Adjust blade, then tighten screws.
Connect the clipper.

FAQs

Do you trim your hair whether it’s dry or wet?

Don’t even try to trim dripping wet hair with clippers; it’s practically impossible. A good towel dry makes it much simpler for you to achieve the desired style and helps keep the clipper blades from rusting.

Are beard trimmers 3 and hair clippers 3 interchangeable?

The length and size of the blade are the main distinction between the two, though. The major design element to watch out for is this. Hair clippers are used to trim much longer hair; therefore they typically include larger attachments that make it easier to change the hair’s length.

Is a trimmer suitable for haircuts?

Hair trimmers are the ideal grooming option when it comes to having a hairstyle and haircut in the shortest amount of time possible.

A #3 clipper blade’s length?

With the third guard, your hair will be 10mm (3/8 inch) long. It is frequently fuller but is still rather brief.

What is the length of the longest clipper?

Among all clipper lengths, the number 8 haircut typically has the greatest haircut number. You can utilize the inch-long hair it leaves behind to fade the sides with a smaller hair clipper while using it to trim the top.

Can skin be sliced by clippers?

Blades are pointed. The factory-set Wahl clipper and trimmer blades shouldn’t cut the skin, though, under typical use. However, keep in mind that dropping or striking the blades can cause them to become misaligned and lead to skin nicks.

What distinguishes a trimmer from a clipper?

A clipper does not cut particularly near to the skin and is designed for cutting bulk hair on broader areas. A trimmer, on the other hand, is made for light shaping, dry shaving, edging, and outlining on tiny regions like the back of the neck, the area around the ears, the area around the sideburns, etc.

How short are your hair cuts with clippers?

In general, the cut is shorter the lower the number. For instance, a “0” will result in hair that is hardly noticeable, whereas an “8” is one inch (25 mm). Starting with 1/8 inch (3.2 mm) for number “1,” the blade guards increase by an eighth of an inch (3.18 millimeters) for each number in between.

Can I shave my face using hair clippers?

You can use clippers, of course. Even with some stubble, your face won’t ever be as baby-ass smooth as it would be with a razor, but it will still look well-groomed. I’d advise attempting a single pass of shaving with the grain and a safety or straight edge razor.

The meaning of trimmer numbers

Since many of the lower guard numbers are utilized in fades, the shorter the guard number, the shorter the hair will be. If you request a fade, you’ll get bonus points for knowing which guard number you want to fade from and into.

What does the trimmer’s length setting do?

A number on the comb or display of your Philips groomer denotes the length setting. This number shows the length of hair that is still there after grooming. This could be the setting or the hair length in millimeters or inches.

What are the variations in clipper blade sizes?

To show how much hair each blade will leave behind, they are numbered. For instance, a #10 blade will leave 1/16′′ of hair behind. The cut will be shorter the higher the blade number. So it should be clear that a #15 blade will deliver a shorter cut than a #5, and vice versa.

Which produces more haircuts, open or closed?

The blade is in its lowest cutting position when the taper lever is closed, which results in more hair being chopped. The blade is at its longest cutting position while the taper lever is open, cutting the least amount of hair. The majority of common clipper blades are configured 000 to 1 without a zero gap.

What are the many sorts of clippers?

Based on where the diode is located, clippers can be divided into two types. Series clippers, in which the load resistance and the diode are connected in series, and. The diode is shunted across the load resistance in shunt clippers.

What are some uses for clippers?

The clipper circuit limits voltage in power supplies because it provides overvoltage protection. They are employed in transmitters as a noise filter. They are utilized in television transmitters and receivers.