beamZ BBP90 Battery Uplight Par User Guide

BBP90 Battery Uplight Par
User Guide

REMOTE CONTROLLER

BLACKOUT

1. Press off existing modes.
2. Press any color button to turn the lights on again.

AUTO
Automatic mode will enable you to run the automatic light programs. To turn on automatic mode:

1. Press on the remote controller. Display shows ‘FF99″.
2. Press <.> or <-> to choose between the different auto programs.
3. Press again to turn off the auto mode.

SOUND
The sound mode will enable the product to respond to the music. To tum on the sound mode

1. Press on the remote controller.
2. Press and then press e> or e> to increase or decrease the sound sensitivity.
3. Press again to turn off the sound mode.

STROBE
Activate the strobe function in automatic or sound mode.

1. Press on the remote controller.
2. Press e> or <-> to either increase or decrease the speed of the strobe.
3. Press again to turn off the strobe. SPEED No Function

SENSITIVITY
To adjust sound sensitivity in sound mode.

1. Press on the remote controller.
2. Press <+> or <-> to Sher increase or decrease sound sensitivity.
3. Press again to tum off the sensitivity mode

%
Select color gradual change mode.

1. Press <%> on the remote controller. Display shows “CC00”.
2. Press <.> or <-> to Sher increase or decrease the speed of the program.
3. Press <%) again to turn off the gradual change mode.

MANUAL
Select one of eight static colors.

1. Press on the remote controller. Display shows.AU01″.
2. Press oil or <-) to choose your static color.
3. Press again to turn off the manual mode.

FADE
To adjust the fade speed of the automatic program. the sound active program and the manual mode.

1. Press on the remote controller. The display shows”EE00″.
2. Press 0.> or e) to either increase or decrease the speed of the program.
3. Press again to turn off the fade mode.

R,G,B,UV AND NUMBER 1-9

1. Select static colour with the buttons ,,, or digit a> to <9>.
2. Press <.> or <-> to either increase or decrease brightness.