FIDLOCK PAC-0084 Vacuum Screw Base Mini Tripod Base User Manual
- October 30, 2023
- FIDLOCK
Table of Contents
FIDLOCK PAC-0084 Vacuum Screw Base Mini Tripod Base
VACUUM Mini Tripod Base
The VACUUM Mini Tripod Base is a versatile product that can be used as a tripod on flat, horizontal, solid and wind-protected surfaces indoors and outdoors, or as a selfie stick. It is made of high-quality materials such as PA6, PA66GF15, PA66GF30, neodymium, stainless steel, aluminium, silicone, and TPU. It is manufactured in China and is protected by one or more published patent applications.
Technical Specifications
- Materials: PA6, PA66GF15, PA66GF30, neodymium, stainless steel, aluminium, silicone, TPU
- Made in China
Proper Use
The VACUUM Mini Tripod Base can be used only with the listed compatible
smartphones. Any other use is considered improper and is prohibited as it
could lead to malfunctions, damage or injuries. Before using the product,
please read the instructions carefully and familiarize yourself with the
support system. Make sure that the assembly is done correctly.
Disposal
The VACUUM Mini Tripod Base can be disposed of in household waste. Please
observe the environmental regulations applicable in your country regarding
disposal.
Legal Information
This product is protected by one or more published patent applications. For
more information on the patent protection of the VACUUM product range, please
visit: www.fidlock.com/patents.
Please visit our website www.fidlock-bike.com for more information.
PAC-0084 / EU / v.1.3 / 21118
Product Usage Instructions
- Read the instructions carefully and familiarize yourself with support system.
- Make sure that the assembly is done correctly.
- Place the VACUUM Mini Tripod Base on a flat, horizontal, solid and wind-protected surface indoors or outdoors.
- For use as a selfie stick, attach the compatible smartphone to the VACUUM Mini Tripod Base and extend the stick to the desired length.
- Take photos or videos as desired.
- After use, dispose of the VACUUM Mini Tripod Base in household waste according to the environmental regulations applicable in your country.
Please read these instructions carefully before assembly or first use and keep them for later reference!
SAFETY INFORMATION
VACUUM is a holder system in which the base (Fig. A) and case (Fig. B) are
held together by magnets and which is secured with a suction cup creating a
vacuum as soon as high forces act on the case.
The VACUUM mini tripod base and a VACUUM phone case may only be used in
conjunction with the VACUUM original products intended for this. Other-wise
malfunctions may occur.
The VACUUM mini tripod base is not dishwasher or microwave safe! Please use
only clear water for cleaning.
Do not place the VACUUM mini tripod base in the freezer!
Make sure that the VACUUM phone case can be joined fully and tightly with the
VACUUM mini tripod base without bumping against the mini tripod or other
objects.
The control lever of the VACUUM mini tripod base must be able to move freely.
Make sure that the VACUUM mini tripod base is placed securely on a solid
surface and cannot tip over. Do not use the VACUUM mini tripod base in windy
conditions, as there is a risk of it tipping over!
Before every use, check whether the VACUUM mini tripod base and VACU-UM phone
case are correctly joined and free of scratches and dirt!
If you discover defects of any kind, cease use immediately and contact your
retailer!
TECHNICAL DATA
- Materials: PA6, PA66GF15, PA66GF30, neodymium, stainless steel, aluminium, silicone, TPU
- Made in China
USE
Before use, familiarise yourself with the handling of the VACUUM holder system
and check that it functions properly. Confirm that the product has been
assembled properly.
Fig. E – Use as a tripod: Hold the legs (Fig. J) of the mini tripods and pull
the telescopic arm (Fig. I) apart until the VACUUM screw base (Fig. G) is at
the desired height. Now fold the legs of the mini tripod outwards and place
the VACUUM mini tripod base on a flat, horizontal, firm and wind-protected
surface where it cannot tip over.
Fig. F – Use as a selfie stick: Hold the legs (Fig. J) of the mini tripods and
pull the telescopic arm (Fig. I) apart until the VACUUM screw base is in the
desired position. Leave the legs folded in.
Loosen the locking screw (Fig. H) on the ball head to adjust the angle to the
desired position of the VACUUM screw base.
To connect the VACUUM phone case to the VACUUM mini tripod base, guide it onto
the VACUUM mini tripod base (Fig. C). Hold the VACUUM mini tripod base with
one hand and snap the VACUUM phone case onto the VACUUM mini tripod base. You
will hear a “snapping sound” as soon as the VACUUM phone case and VACUUM mini
tripod base touch each other.
To detach the VACUUM phone case from the VACUUM mini tripod base hold it with
one hand and press the control lever on the VACUUM mini tripod base downwards
(Fig. D). With the control lever pressed, remove the VACUUM phone case and
then snap the control lever back to its original position. Now fold in the
legs of the mini tripod and push the telescopic arm of the mini tripod
together.
If the VACUUM mini tripod base or VACUUM phone case are dirty, clean them
immediately with clear water.
PROPER USE
The VACUUM mini tripod base is intended for use as a tripod on flat,
horizontal, solid and wind-protected surfaces indoors and outdoors, or
alternatively for use as a selfie stick. It may only be used in connection
with the listed compatible smartphones.
Any other use is considered improper and is prohibited as it could lead to
malfunctions, damage or injuries.
DISPOSAL
The VACUUM mini tripod base can be disposed of in household waste. Please observe the environmental regulations applicable in your country regarding disposal.
LIABILITY
We have gone to great lengths to ensure that the operating instructions are
correct, complete and as precise as possible. However, deviations cannot be
entirely ruled out, and no liability can be accepted for errors in the
provided operating instructions.
We accept no liability for damage resulting from failure to heed the operating
instructions.
If the VACUUM mini tripod base is used improperly or for another purpose or is
repaired by the user, no liability is accepted for any damages.
LEGAL INFORMATION
This product is protected by one or more published patent applications. For
more information on the patent protection of the VACUUM product range, please
visit: www.fidlock.com/patents
See our website for more information: www.fidlock-bike.com.
FIDLOCK GmbH, Kirchhorster Straße 39, 30659 Hanover, Germany,
AG Hanover, HRB 204281, E-mail: info@fidlock-bike.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>