MEDCURSOR MD-KP02 Heated Knee Massager User Manual

June 17, 2024
MEDCURSOR

MEDCURSOR-logo

MEDCURSOR MD-KP02 Heated Knee Massager

MEDCURSOR-MD-KP02-Heated-Knee-Massager-product-image

USER MANUAL
Knee Massager with Heat
MODEL NO.: MD-KP02

READ THIS MANUAL THOROUGHLY BEFORE USING AND KEEP IT FOR FUTURE REFERENCE

IMPORTANT SAFEGUARDS

SAFETY PRECAUTIONS:
WARNING: Please wear clothes while using the product to prevent burns. Do not use it directly on the skin.

  1. The duration of each use is 30 minutes. Please assess the condition of your knees and adjust the frequency of use accordingly.
  2. It is recommended to use the heating function from level 40 onwards and wear clothing while using it.
  3. If you notice any skin or leg issues during use, stop using the product and consult a physician.
  4. Avoid excessive use of the massage function.
  5. During use, your knees may temporarily turn red. This does not indicate a problem. If this symptom persists, consult an orthopedic surgeon.
  6. When wearing stockings, the belts on the product may snag them. You can remove the stockings before use.MEDCURSOR-MD-KP02-Heated-Knee-Massager-01 \(1\)

PRODUCT PRECAUTIONS

  1. This product contains lithium batteries. Do not disassemble, modify, immerse in water , or throw it into a fire, as it may damage the product.
  2. If you experience any discomfort or irregularities while using the product, stop using it immediately. If you have any unusual sensations on your body or skin, consult a doctor and follow their advice.
  3. This product is not intended for use by persons (including children’s) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of this product by a person responsible for their safety.
  4. Keep the product out of the reach of children and infants. Do not allow them to come into contact with or operate the product to prevent burns, electric shocks, or personal injuries.
  5. DANGER: The heating pad is NOT WASHABLE.
  6. DO NOT damage or modify the product, and avoid forcefully bending, pulling, or squeezing the power cord. Additionally, do not place heavy objects on or squeeze the power cord.
  7. DO NOT use this product if you are sensitive to heat or are not suitable for hot compress.

GETTING TO KNOW KNEE MASSAGER

The Medcursor knee massager combines heating and vibration massage for a delightful experience. With five heating levels and three vibration modes, you can customize your massage experience. This versatile 3-in-l massager is designed for knee discomfort, as well as providing relief for elbows and shoulders. Its cordless design with a built-in battery allows for wireless operation anywhere. Safety features, including a 30-minute auto-off timer and overheat protection, ensure your peace of mind during your massage session.

  1. PRODUCT DIAGRAMMEDCURSOR-MD-KP02-Heated-Knee-Massager-01 \(2\)
  2. CONTROL PANELMEDCURSOR-MD-KP02-Heated-Knee-Massager-01 \(3\)

MEDCURSOR-MD-KP02-Heated-Knee-Massager-01 \(4\)

PACKAGE CONTENTS

  • 1 x Knee Massager with Heat
  • 1 x USB-A to USB-C Cable
  • 1 x Extension Strap
  • 1 x User Manual

SPECIFICATIONS

Model: MD-KP02
Rated voltage: 5V–
Rated power: 7W
Battery Capacity: 2000mAh
Charging time: 180mins

OPERATING INSTRUCTIONS

  1. Make sure to charge it before first use.

  2. Use the product on your knee, shoulder or elbow as your desire. (See how to wear the product on Page 6 – 8)
    NOTE: The prompt tone is on by default. Short press button to turn on/off the prompt tone for all buttons.

  3. Long press button for 2 seconds to switch on. By default, the product will start at a heating temperature of 40°C (104 °F) and Mode 1.

  4. Short press button to switch between the massage mode Ml, M2, M3 and OFF. When the massage mode is off, the massage mode indicator will disappear on the screen. NOTE: When the heat function is off and the massage mode is on, the screen will show Ml/Ll, M2/L2, M3/L3 according to your choice.

  5. Short press button and button enable you to add or decrease heating temperature° 5° C at a time. The product is with five adjustable heating levels ranging from 40°C/104 ° F to 60°C/140° F.
    NOTE: When the temperature is set 40°C, pressing the button again will turn off the heat function.

  6. The product will be automatically off after 30 minutes.

KNEE MASSAGER

  1. Place the massager on your knee (The short massage belt facing down and the screen control on the thigh).
  2. Fix the short massage belt on the calf with velcro. MEDCURSOR-MD-KP02-Heated-Knee-Massager-01 \(8\)
  3. Fix the long massage belt on the thigh with velcro. Adjust the tightness and comfort of the massage belts.

SHOULDER MASSAGER

  1. Stick the velcro of the extension strap to the long massage belt.MEDCURSOR-MD-KP02-Heated-Knee-Massager-01 \(9\)
  2. Fix the short massage belt with velcro according to the size of the upper arm. MEDCURSOR-MD-KP02-Heated-Knee-Massager-01 \(10\)
  3. Place the massager on your shoulder (The short massage belt facing down and the screen control on the shoulder).
  4. Fix the extension strap with velcro on the chest. Adjust the tightness and comfort of the short massage belt.

ELBOW MASSAGER

  1. Fix the short massage belt with velcro according to the size of the lower arm.
  2. Place the massager on your elbow (The short massage belt facing down and the screen control on the upper arm).MEDCURSOR-MD-KP02-Heated-Knee-Massager-01 \(11\)
  3. Fix the long massage belt on the upper arm with velcro. Adjust the tightness and comfort of the massage belt.

CHARGING FUNCTION

  1. When charging, the LED light strip will show a breathing blue light effect. When fully charged, the light will remain solid blue. This product can not be used while charging.
  2. When the battery is low, the LED light strip will flash blue.

NOTE: When the volume function is turned on, the icon will flash white and make a beeping sound when the battery is low.

WORKING TIME
The default working time is 30 minutes. During this time, switching the heating temperature or vibration mode will not cause the auto-off time to reset.

CARE & MAINTENANCE

  • HOST MAINTENANCE
    The display of the main unit with the touch function should be well protected by the application. To clean the main unit, please use the soft cloth to wipe it.

  • PRODUCT FABRIC AREA
    The fabric area does not support washing. When cleaning and maintenance is required, please use alcohol to sterilize and remove sweat stains or wipe with a clean wet towel.

  • STORAGE REQUIREMENTS
    Please keep this product out of the reach of children, away from humidity, high temperature, direct sunlight and water splash. When not in use for a long time, you should turn off the power and keep charging it every two months.

USE ENVIRONMENT

| USE ENVIRONMENT| STORAGE AND TRANSPORTATION
---|---|---
Temperature range| 0°C-40°C(32°F-104°F)| -l0°C-S0°C(l4°F-122°F)
Humidity range| <80%RH| <80%RH
Atmospheric pressure| 70KPA-106KPA| 70 KPA-ll0KPA

OBSOLESCENCE REQUIREMENTS
Please dispose of the battery after the product expires according to local regulations or environmental protection regulations.

TROUBLESHOOTING

If the product is not functioning properly, please check if any of the following issues occur. If the suggestions we provide do not resolve the problem, please reach out to our customer support for further assistance.

QUESTION REASON SOLUTION
Knee pads won’t work The product is still connected to the household power
outlet for charging. Remove the charging cable from the product.
The battery is dead. The product needs to be recharge.
The power button is not pressed correctly. Long press the power button firmly

until the product is turned on.
Charging indicator does not light up| The USB charging cable is not properly plugged into a power outlet.| Please ensure that the USB charging cable is correctly plugged into the power socket.
The product does not heat| This product may not operate properly when used outside the recommended ambient temperature range.| Use within the recommended operating temperature range of 0°C~40°C.
The product stops working during the operation| The battery is exhausted.| Insufficient battery. Please charge.
After about 30 minutes, the product automatically stops working.| Please restart the machine.

WARRANTY INFORMATION

  • We grant 1 year warranty on the product commencing on the date of purchase. Within the guarantee period, we will eliminate any defects in the appliance resulting from faults in materials or workmanship. Please contact us at: support@medcursor.com to launch a warranty claim.
  • This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorized persons and if original product parts are not used.

CUSTOMER SUPPORT

  1. If you have any product questions or concerns, please feel free to contact us directly at support@medcursor.com .
  2. We have a hassle-free warranty and Medcursor customer service team to provide satisfactory solutions to any problems you may have.

www.medcursor.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals