Ingenuity 60194 Portable Swing User Manual
- June 4, 2024
- ingenuity
Table of Contents
**
**
Ingenuity 60194 Portable Swing
WARNING
To Prevent Serious Injury Or Death From Children Falling Or Being Strangled In
Straps:
- Use the product only if the child meets ALL of the following conditions:
- Cannot sit up by himself or herself
- Is not an active child who may be able to climb out of the seat (approximately 9 months of age)
- Weighs more than 6 lbs. (3kg) and less than 20 lbs. (9kg)
- NEVER leave child unattended.
- ALWAYS use restraint system.
- Not intended for carrying baby
- Never move or lift the product while child is in the seat.
- NEVER lift swing using a toy bar as a handle.
- NEVER attach any additional strings or straps to product or toy bar.
- FALL HAZARD: NEVER place the swing on countertops, tables, on or near steps or on other elevated surfaces. • ALWAYS use on the floor.
To Prevent Serious Injury or Death
- Use only in reclined position until child is at least 4 months old AND can hold head unassisted. Young infants have limited head and neck control. If the swing is too upright, infant’s head can drop forward, compress the airway, and result in DEATH.
- This product is not intended for prolonged periods of sleeping.
- NEVER use as an infant carrier for automobile or airline travel.
- To avoid injury, ensure that children are kept away when unfolding and folding this product.
- Do not let children play with this product.
- SUFFOCATION HAZARD: NEVER use on soft surface (bed, sofa, cushion), as seat may tip over and cause suffocation.
IMPORTANT
- Adult assembly required.
- This product contains small parts
- Please read all instructions before assembly and use of the product.
- Care should be taken in unpacking and assembly.
- Examine product frequently for damaged, missing, or loose parts.
- DO NOT use if any parts are missing, damaged, or broken.
- Contact Kids II for replacement parts and instructions if needed. Never substitute parts.
- This product has not been designed for sleeping. Should your child need to sleep, they should be placed in a suitable cot or bed.
Battery Information
The swing control module requires (4) size C/LR14 (1.5V) alkaline batteries
(not included).
CAUTION:
Follow the battery guidelines in this section. Otherwise, battery life may be
shortened or the batteries may leak or rupture.
- Always keep batteries away from children.
- Do not mix old and new batteries.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Install the batteries so that the polarity of each one matches the markings in the battery compartment.
- Do not short-circuit the batteries.
- Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
- Remove exhausted batteries from the battery compartment.
- Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
- Please use the correct disposal method for batteries.
- Remove batteries before putting the swing into storage for a prolonged period of time.
- Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
- Do not dispose of product or batteries in fire, batteries may explode or leak.
- This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.
**Parts List and Drawing
**
No. | Qty. | Description |
---|---|---|
1 | (1) | Left frame/pivot assembly |
2 | (1) | Right frame/pivot assembly with swing control module |
3 | (2) | Base frame tube |
4 | (2) | Seat tube |
5 | (1) | Seat pad |
6 | (1) | Toy bar with toys |
7 | (1) | Headrest |
not included
Using the Seat Restraint
Using the Recline Function
Using the Swing Control Module
The True Speed Control™ provides steady motion to calm your baby. To use the
swing function… Turn the Speed Selector Ring clockwise to any of six positions
to start the swing and select the speed. Turn the selector ring counter-
clockwise to the first position (OFF) to stop the swing.
NOTE:
It is not necessary to push the swing. The swing will automatically adjust
motion to the desired speed within 20 to 25 seconds after speed selection.
Use the Swing Timer Select function to turn OFF the swing automatically. Press
the button to sequence to the desired timer setting of 15, 30, or 45 minutes.
The three LEDs beside the button indicate the selected time period. If you do
not select a timer setting (all LEDs are OFF), the unit uses a default time of
60 minutes for auto-shutoff. To use the swing function after auto-shutoff,
either press the Swing Timer Select Button or turn the Speed Selector Ring. To
use the music/sounds function… Press the Melody/Volume Select Button to start
a melody at low volume. Six different melodies will play. Press the button
again to increase the volume to high. Press the button a third time to stop
the music. Otherwise, auto-shutoff occurs after about 15 minutes.
Storage and Travel
When putting
swing away for storage, always store in a dry location, away from any heat
sources, and out of the sun.
Care and Cleaning
Seat pad – Remove from frame. Fasten buckles on seat restraint and seat
pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash
with cold water, gentle cycle. No bleach. Tumble dry, low heat.
Headrest – Fasten all hook-and-loop patches. Machine wash with cold
water, gentle cycle. No bleach. Air dry flat.
Toy bar and toy – Wipe clean with a damp cloth and mild soap. Air dry. Do
not immerse in water.
Frame – Wipe the metal frame with soft, clean cloth and mild soap.
FCC Statement / CAN ICES-3 (B) / NMB-3(B)
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>