BELKIN F5U140 USB Media Reader and Writer User Manual
- June 17, 2024
- belkin
Table of Contents
Belkin USB Media
Reader & Writer
User Manual
F5U140 USB Media Reader and Writer
P73880-B
USB Media Reader & Writer for CompactFlash™ F5U140
USB Media Reader & Writer for SmartMedia™ F5U141
USB Media Reader & Writer for MultiMediaCard/Secure Digital F5U143
USB Media Reader & Writer for Memory Stick® F5U144
USB 8-in-1 Media Reader & Writer F5U148
Introduction
Congratulations
Thank you for purchasing a Belkin USB Media Reader & Writer (the Media
Reader). The Media Readers provide compatibility with all popular flash memory
formats, including CompactFlash Type I and Type II, IBM® Microdrive™,
SmartMedia, MultiMediaCard/Secure Digital (MMC/SD), Memory Stick®, and
MagicGate™ Memory Stick (non-secure mode only).
In addition to Media Readers, Belkin manufactures an entire line of USB and PC
accessories. Please visit belkin.com for details.
Overview
Features
- Easy transfer of data between slots (F5U148 only)
- Quick and easy access to digital photos, MP3s, and other digital files
- Doubles as a removable media storage device
- Bus-powered—no power supply required
- Plug-and-Play, hot swap capability
- Drag-and-drop file transfer
- Belkin Lifetime Warranty
System Requirements
(F5U140, -141, -143, -144)
- Computer with available USB port
- Windows® 98, Me, 2000, or XP
- Mac® OS 8.6 through 9.x or Mac OS X.1 or higher
(F5U148)
- Computer with available USB port
- Windows 98, Me, 2000, or XP
- Mac OS 8.6 through 9.x or Mac OS X.1.2 or higher
Package Contents
- Belkin USB Media Reader & Writer
- User Manual
- Installation CD
Media Insertion
To prevent damage to your Media Reader and/or media card, it is important that
the media card be correctly inserted into the Media Reader. See the drawings
below that illustrate the proper orientation for insertion of your media
card.
Installation Procedure for Windows Operating Systems
IMPORTANT NOTE: DO NOT PLUG MEDIA READER INTO COMPUTER UNTIL INSTRUCTED
TO DO SO.
Windows 98, Me, 2000, XP
-
Insert the Belkin Media Reader Installation CD.
a) After a few moments, the setup application will appear on your computer screen.
b) If the setup application does not appear, double-click “My Computer”, then click on your CD-ROM drive icon. This will load the setup application’s main page. -
Click on the button that corresponds to your Media Reader.
-
The “InstallShield Wizard” will now start. Click “Next” on each of the screens that are displayed, then click “Finish”.
Your computer will now restart to complete the driver installation process. -
After your Windows operating system restarts, connect the Media Reader’s USB plug to the USB port on your PC or USB hub and follow the on-screen instructions to complete the installation.
-
The single-slot Media Readers will be recognized by your computer system as an individual removable disk drive.
The two-slot reader (F5U148) will be recognized as two individual removable disk drives. To access the new drive(s), click the “My Computer” icon found on your Windows desktop display. When the “My Computer” window opens, you will see a disk drive icon representing each disk drive currently installed on your computer.
Note: In Windows 2000, after connecting the device to your computer for the first time, it may be necessary to restart your computer to complete the hardware installation process.
IMPORTANT NOTE
Windows 98/Me/2000
When your Belkin single-slot Media Reader is installed for the first time, it
will be represented by a custom drive icon indicating the Media Reader’s
compatible media type. The two-slot Media Reader (F5U148) will be represented
by two custom icons, the first labeled “CompactFlash (X)”, the second labeled
“MMC/SD (Z)”, where X and Z represent the disk drive letters assigned by your
Windows operating system. The “CompactFlash” icon will never change. The
MMC/SD icon will change when different media types are inserted in the Media
Reader. For example, when a Memory Stick module is inserted into the Media
Reader, the “MMC/SD” icon will change to “Memory Stick”.
Note: For the F5U148 in Windows XP, it will show up with the default
Windows icon with “Removable Media” written below it.
Formatting Your Media Card
If you are using your media card for the first time, or there is currently no
data on the card, it is recommended the card be formatted using the provided
format utility. This application will take over the Windows operating system’s
format normally executed from the “My Computer” window.
Unlike the Windows operating system’s format, the Belkin format utility will
actually do a low-level format so that it is guaranteed to work with digital
media device(s) such as digital cameras or digital camcorders, etc. A low-
level format completely erases the media card then writes the appropriate file
system data instead of just writing zeros in the media.
To access the format utility directly, select “Programs”, then select “Belkin
Flash Media Reader-Writer” from the program list. Choose the “Digital Media
Formatter”, then follow the on-screen instructions, or right-click on the
drive icon from the “My Computer” window, and choose “Format”.
There are two options available in the format utility: Quick and Full Format.
Quick Format
This option will erase all data content in the media but does not recover bad
blocks. Quick Format will check to see if the number of bad blocks in the
media is within allowable limits.
A large number of bad blocks usually indicate worn-out media.
Full Format
The Full Format option will completely reformat the media.
This option will also recover any bad block from the media.
The format utility has been tested and complies with the following media
formats. Other capacities should work, too, even if they are not listed below:
SmartMedia: 2, 4, 8, 16, 32, 64, and 128MB media
Memory Stick: 4, 8, 16, 32, 64, and 128MB media
CompactFlash: 4, 8, 16, 32, 48, 64, 160, 192, 256, 320, 384, and 512MB
media
MultiMediaCard: 4, 8, 16, 24, 32, and 64MB media
Secure Digital: 4, 8, 16, 32, 64, and 128MB media
IBM Microdrive: 170 and 340MB, and 1GB media
Accessing Files and Data
- Click the “My Computer” icon. Double-click on the drive icon assigned to your media card. A window will open displaying the contents of the currently installed media card.
- To move files to and from the removable drive, simply drag the file to the alternate location or use other file transfer methods that are standard in your computer’s operating system.
Safe Removal of Media Cards and Readers
All Versions of Windows Operating System
-
Do not remove your media card from the Media Reader while data is being read or written to the card. Doing so could corrupt the media card, resulting in a loss of data.
The correct way to remove the card is to go to “My Computer”, right-click on the drive, and select “Eject” from the list. Depending on your operating system, this feature may not give you a prompt that says it was done.
After clicking on “Eject”, you can remove the card without corrupting the files on the card. -
To safely remove a Media Reader from your computer, click on the “Unplug or Eject Hardware” button found in the right-hand corner of the Windows task bar. Failure to follow this step could result in the loss or corruption of data stored on your media card.
Uninstalling Your Media Reader
All Versions of Windows Operating System
To uninstall your Media Reader, click the “Start” button, select “Programs”,
then select “Belkin Flash Media Reader-Writer” from the program list. Choose
the “Remove Belkin Flash Media Reader-Writer” option and follow the on-screen
instructions. Your Windows operating system will prompt you to restart your
computer to complete the uninstall procedure.
Installation Procedure for Mac OS
Mac OS 8.6–OS 9.x
-
Insert the Belkin Media Reader Installer CD.
a) Double-click on the “USB Media Reader” CD-ROM drive icon that appears on your desktop.
b) Click on the Media Reader Installer icon.
c) Select the driver for your Media Reader from the list and click the “Install” button. -
Follow the on-screen instructions to complete driver installation.
-
Connect the Media Reader’s USB plug to an available USB port on your Mac computer, or USB hub, and insert your media card.
-
Once the media card is inserted into any of the single-slot Media Readers, the Media Reader will appear on your desktop as a standard Mac OS disk drive. If you wish to assign new drive names to the media card, use the Mac OS format utility to reformat the card. The two-slot Media Reader will appear on your desktop as two standard Mac OS disk drives if media cards are inserted into each of the two slots. If only one media card is inserted, the Media Reader will appear on your desktop as a single Mac OS disk drive.
Mac OS X.1.2 and Above
-
The single-slot Media Readers are mass storage-compliant devices. The USB 8-in-1 Media Reader & Writer is a mass storage-compliant device, and also a multi-LUN device.
Support for mass storage-compliant and multi-LUN devices is built into Mac OS X.1.2 and above. To install the Media Reader, simply plug it into an available USB port on your Mac computer or USB hub. No further user intervention is required. -
Once the media card is inserted, it will appear on your desktop as a standard Mac OS disk drive. If you wish to assign a new drive name to the media card, use the Mac OS format utility to format the card. The two-slot Media Reader will appear on your desktop as two standard Mac OS disk drives if media cards are inserted into each of the two slots.
If only one media card is inserted, the Media Reader will appear on your desktop as a single Mac OS disk drive.
Accessing Files and Data
- Double-click on the drive icon assigned to your Media Reader. A window will open displaying the contents of the currently installed media card.
- To move files to and from the disk, simply drag the file to the alternate location or use other file transfer methods that are standard in your computer’s operating system.
Safe Removal of Digital Flash Media Cards
Mac OS offers two methods of safely removing media cards from your Media
Reader:
-
Click on the Media Reader drive icon, then choose “Special” from the command bar on the top of your computer screen. Select “Eject” from the drop-down list.
or -
Click on the Media Reader drive icon and drag the icon to the Mac OS trash can.
Uninstalling Your Media Reader
Mac OS 8.6
Select the “Apple” menu, then “Control Panels”, then “Extensions Manager”.
Click on the “View” button, then select “as Packages” from the drop-down menu.
Scroll down the list of extensions until you find “Belkin USB Flash Media
Driver” and “Belkin USB Flash Media Shim”. Click the check box next to both of
these entries to disable the Media Reader extensions.
Mac OS 9.0–9.x/OS X.1.2 and Above
The Belkin Media Readers utilize mass storage drivers that are included in Mac
OS 9–0 and OS X.1.2 and above. There is no
Troubleshooting
Cannot find the drive:
- Click on “My Computer” on your desktop. If you do not see “Removable Drive (X)”, where X represents the drive letter on your computer, unplug the Media Reader and uninstall the software and remove the device in the Device Manager.
- Restart the computer.
- Then, first reinstall the software for the device you want to install. After the installation is complete, plug in the device.
- Click on “My Computer” on your desktop to see “Removable Drive” appear, as it should.
In Windows 2000, the computer keeps asking for the installation CD:
- Unplug the Media Reader, then uninstall the software/device.
- Restart your computer.
- Reinstall the software.
- Plug in the Media Reader after the software is installed and follow the instructions.
Cannot save files to the media card:
- Make sure the card is installed properly.
- Check the card to make sure it is not corrupted.
- Consult your dealer if the problem is not corrected.
Media reader is displayed in “My Computer” as two “Removable Disks”:
Install the driver for your Media Reader. The driver includes custom icon
support.
Information
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare
under our sole responsibility that the products: F5U140, F5U141, F5U143,
F5U144, F5U148
to which this declaration relates: Comply with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin Components, declare under our sole responsibility that the
products, F5U140, F5U141, F5U143, F5U144, F5U148, to which this declaration
relates, are in conformity with Generic Emissions Standard CISPR 22B:1997 and
with Generic Immunity Standard EN50082-1 1992.
ICES Statement
This Class B digital apparatus complies with Canadian ICES-003.
Belkin Components Limited Lifetime Product Warranty
Belkin Components warrants this product against defects in materials and
workmanship for its lifetime. If a defect is discovered, Belkin will, at its
option, repair or replace the product at no charge provided it is returned
during the warranty period, with transportation charges prepaid, to the
authorized Belkin dealer from whom you purchased the product. Proof of
purchase may be required.
This warranty does not apply if the product has been damaged by accident,
abuse, misuse, or misapplication; if the product has been modified without the
written permission of Belkin; or if any Belkin serial number has been removed
or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification,
extension, or addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY,
INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR
REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH
BELKIN PRODUCTS.
Some states do not allow the exclusion or limitation of incidental or
consequential damages or exclusions of implied warranties, so the above
limitations of exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights that vary from state
to state.
belkin.com
Belkin Components
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin Components Ltd.
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
Belkin Tech Support
US: 310.898.1100 ext. 2263
800.223.5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
© 2002 Belkin Components. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
P73880-B
Documents / Resources
|
BELKIN F5U140 USB Media Reader and
Writer
[pdf] User Manual
F5U140 USB Media Reader and Writer, F5U140, USB Media Reader and Writer, Media
Reader and Writer, Writer
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>