ENDORFY EY5A067 Compact Wireless Brown Instruction Manual

: June 1, 2024
: ENDORFY

Table of Contents

ENDORFY EY5A067 Compact Wireless Brown
Thock Compact Wireless
SOFTWARE/MULTIMEDIA KEYS
LED BACKLIGHT EFFECTS
CREATING A CUSTOM BACKLIT MODE
ARROW KEYS SWAP
FACTORY RESET
ALTERNATIVE KEY FUNCTIONS
Safety instruction
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ENDORFY EY5A067 Compact Wireless Brown

INSTRUCTION MANUAL

Thock Compact Wireless

MECHANICAL GAMING KEYBOARD

Wireless

use

LEFT LED: CAPS LOCK

LED

RIGHT LED: BATTERY SUPPLY (ONLY IN WIRELESS MODE)

LED

BATTERY CHARGE INDICATOR (WIRELESS MODE WITH THE CABLE CONNECTED)

LED

BATTERY CHARGING (WIRED MODE, ACTIVE WHEN THE KEYBOARD IS OFF)

WIRELESS MODE (Bluetooth & 2.4G)

LED

After the first pairing, during the following connection, the [Zl, [Xl or [Cl key (depending on the selected device: BT1, BT2 or BT3) will be backlit in white. After successful pairing, the [Zl, [Xl or [Cl key (depending on the selected device: BT1, BT2 or BT3) will turn the same colour as the keyboard backlight. If the keyboard cannot be paired with the selected device within 180 s, the pairing mode will be disabled. Then, the [Zl, [Xl or [Cl key (depending on the selected device: BT1, BT2 or BT3) will turn the same colour as the keyboard backlight.

In the wireless mode (Bluetooth and 2.4G), if the keyboard is not used for 5 minutes, the device will enter the first level of the sleep mode, and LED backlight will be disabled. Press any button to switch the LED backlight of the keyboard back on after the device has entered the first level of sleep mode.

In the wireless mode (Bluetooth and 2.4G), if the keyboard is not used for 30 minutes, the device will enter the second level of the sleep mode, and LED backlight will be disabled along with Bluetooth communication. Then, press any button to switch the LED backlight of the keyboard and Bluetooth communication back on after the device has entered the second level of sleep mode.

SOFTWARE/MULTIMEDIA KEYS

KEY

LED BACKLIGHT EFFECTS

KEY

CREATING A CUSTOM BACKLIT MODE

1. Press [FN] {key with the EN DOR FY logo) + [LeftShift] to enter the usermodes.
2. Press [FN] + [Left Shift] for 3 seconds to define the backlight mode.
The LED indicator will start to blink.
Select any button to define the backlight colour-press the selected key to switch between the available colours. Repeat colour selection for all the buttons to be backlit.
3. Press [FN] + [Left Shift] for 3 seconds to save the user mode.

ARROW KEYS SWAP

KEY

FACTORY RESET

KEY

ALTERNATIVE KEY FUNCTIONS

KEY

Safety instruction

1. Use the product only as intended.
2. Make sure that the product is in good working order before using it.
3. This device is intended for indoor use, under normal humidity conditions. Do not use it outdoors.
4. Do not install and use the device within reach of children.
5. Before connecting the device, wait until it heats up to the ambient temperature to prevent damage due to condensation.
6. Only use a clean, dry cloth for cleaning. Do not touch the device with wet hands.
7. The device does not have any parts that can be repaired by the user. Return the device to the service centre for repair.
8. The warranty will be voided if you open the enclosure or modify the device.
9. The product should be used as intended. Incorrect use niay damage the product and be dangerous to your health.
10. Do not use the product near liqu ds or in places where it may be directly exposed to liquids. If the device comes into contact with any liquids, immediately disconnect it from the i power source.
11. The warranty does not cover mechanical damage to the product.
12. If the device n1alfunctions. pron1ptly disconnect the power supply and contact the technical support department of Endorfy.
13. Do not discard electrical and electronic equipment together with other household waste.
14. The end user is obliged to remove unnecessary or faulty electrical equipment to the collection point or the seller. To obtain additional information, contact the local autnorities or the store where you purchased the product.
15. Do not dismantle the battery on your own or expose it to moisture, fire, high temperatures or liquids.
16. In case of an electrolyte leak, deforniation or discolouration of the battery, do not use or charge the device.
17. Do not let the battery of the device remain discharged for a longer period. Do not replace the battery in the device on your own.
18. Charge the batteries only using the cable supplied with the device after connecting it to the USB port of the computer. Do not use external power suppry units.
19. Incorrect handling of batteries or failing to observe the rules described above may cause a fire or chemical burns.
20. The life of the battery depends on the way it is used.
21. End-of-life batteries should be transferred for disposal according to the applicable local law.
22. Keep the batteries out of reach of children.