Disnep Stitch SP-0766 Water Dancing Speaker Instruction Manual

June 13, 2024
Disnep

Disnep Stitch SP-0766 Water Dancing Speaker

Disnep Stitch SP-0766 Water Dancing Speaker

Product Overview

Product Overview

Package Contents

1(One) Stitch Water Dancing Speaker
2.32in. x 10.35in. x 2.32in. (5.9cm x 26.3cm x 5.9cm)
1(One) USB Type-C Power Cable 19.7in. (50cm)
1(One) Instruction Manual

Specification

Driver Diameter: 40 mm
Impedance: 4 Ohms
Power Supply: 5V/1A
Filled with Environmentally-Friendly
Precision Oil. It’s not actually water.
Bluetooth Range: 32.8 Feet
Bluetooth Version: 5.3
USB Type-C Power Cable Included
USB Type-C Power Cable rating 5V/1A Max.

CAUTION : The USB Type-C Power Cable included with this item is intended for use with this product. Only use the included USB Type-C Power Cable to operate this product.

Power On/Off

Power on
Connect the Dancing Water Speaker to a 5V/1A USB Adapter (not included) with supplied USB Type-C Power Cable. Slide the ON/OFF switch to the “ON” position.

Power off
Slide the ON/OFF switch to the “OFF” position.

Pair Wireless Speaker With Your Mobile Device

  1. Keep the distance between your wireless speaker and mobile phone (or other Bluetooth devices) within 32.8 Feet.
  2. Power on the wireless speaker.
  3. Activate the Bluetooth function on your phone within range and select “ DANCING WATER SKR ” from the list shown.
  4. You will hear a beep sound when pairing is successful.

Reconnect Wireless Speaker to Your Mobile Device

When powered on, the wireless speaker will automatically connect with the last successfully paired device.

FAQ

  • If the Wireless speaker cannot be paired with your device, please try the following:
    Ensure that your speaker is in pairing mode or reconnection mode.
    Ensure that Bluetooth search function of your mobile device is activated.

  • If the Wireless speaker cannot be powered on:
    Ensure that the power adapter is connected securely and the outlet works.

Safety Instructions

  • The input voltage to the product is DC 5V 1A.
  • In order to operate the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for operating the product.
  • Switch off the product after use.
  • Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.

FCC STATEMENT

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  2. This device may not cause harmful interference.
  3. This device must accept any interference received, including interference that may cause undesired operation.
  4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
This equipment should be installed and operated with minimum distance 20cm Specification between the radiator & your body.

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals