YITAHOME JXFY-V1 King Size Bed Frame Installation Guide
- June 17, 2024
- YITAHOME
Table of Contents
JXFY-V1 King Size Bed Frame
Installation Guide
FTBFBF-0100
JXFY-V1 King Size Bed Frame
-
Two or more people are required for assembly.
-
To avoid squeaking, please tighten the bolts all the way.
An electric drill is recommended for the assembly. -
Professional installation is highly recommended.
Tighten the screws,install the legs
Take out parts F1 and F3, and lock the iron frame foot K ,in the middle according to the figure. Note that there are 2 holes located on the inner side of the board. Then lock the bed hanging pieces W/X on the front and rear of the board, with 3 holes on each side.
Same as Step 3
Noted that the middle cross beam,the direction of the red arrow is the front
Loosen the screw of headboard side leg and both sides of footboard, hanging the bracket and tight the inners crew.
Noted that the middle cross beam, the direction of the red arrow is the front
After
aligning all the holes, tighten all the inner screws.
Loosen the screw of the middle of footboard, hanging the bracket and tight the
inners crew.
Loosen the screw of the middle of footboard, hanging the bracket and tight the inners crew.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>