Connect Tech CTIM-00084 Quark Carrier User Guide
- June 17, 2024
- Connect Tech
Table of Contents
- CTIM-00084 Quark Carrier
- Quark Carrier User Manual
- Preface
- Customer Support Overview
- Telephone/Facsimile
- Copyright Notice
- Trademark Acknowledgment
- Revision History
- Introduction
- Product Feature and Specifications
- Part Numbers / Ordering Information
- Product Overview
- Block Diagram
- Fan Header
- Connector Summary
- Switch Summary
- Detailed Feature Description
- Description
- Description
- Description
- Description
- Description
- Description
- Power Header
- Description
- I/O Header Description
- Reset & Recovery Pushbutton Description
- LED Indicators
- Description
- Typical Installation
- Thermal Details
- Cable Information
- Connect Tech Custom Thermal Solutions
- Connect Tech Inc. NVIDIA® Jetson Xavier™ NX Thermal Solutions
- Current Consumption Details
- NVIDIA® Jetson Nano™
- NVIDIA® Jetson Xavier™ NX
- Software / BSP Details
- Mechanical Details
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CTIM-00084 Quark Carrier
Quark Carrier User Manual
Connect Tech Inc. Tel: 519-836-1291
42 Arrow Road Toll: 800-426-8979 (North
America only)
Guelph, Ontario Fax: 519-836-4878
N1K 1S6 Email: sales@connecttech.com
www.connecttech.com support@connecttech.com
CTIM-00084 Revision 0.03 2020-07-13
https://manual-hub.com/
Preface
Disclaimer
The information contained within this user’s guide, including but not limited to any product specification, is subject to change without notice.
Connect Tech assumes no liability for any damages incurred directly or indirectly from any technical or typographical errors or omissions contained herein or for discrepancies between the product and the user’s guide.
Customer Support Overview
If you experience difficulties after reading the manual and/or using the product, contact the Connect Tech reseller from which you purchased the product. In most cases the reseller can help you with product installation and difficulties.
In the event that the reseller is unable to resolve your problem, our highly qualified support staff can assist you. Our support section is available 24 hours a day, 7 days a week on our website at: http://connecttech.com/support /resource-center/. See the contact information section below for more information on how to contact us directly. Our technical support is always free.
Contact Information
Mail/Courier
Connect Tech Inc.
Technical Support
42 Arrow Road
Guelph, Ontario
Canada N1K 1S6
Email/Internet
sales@connecttech.com
support@connecttech.com
www.connecttech.com
Note:
Please go to the Connect Tech Resource Center for product manuals, installation guides, device drivers, BSPs and technical tips. Submit your technical support questions to our support engineers.
Telephone/Facsimile
Technical Support representatives are ready to answer your call Monday through Friday, from 8:30 a.m. to 5:00 p.m. Eastern Standard Time. Our numbers for calls are:
Toll Free: 800-426-8979 (North America only)
Telephone: 519-836-1291 (Live assistance available 8:30 a.m. to 5:00 p.m. EST,
Monday to Friday)
Facsimile: 519-836-4878 (on-line 24 hours)
Document: CTIM-00084 Revision: 0.03
Page 3 of 21
Connect Tech Inc. 800-426-8979 | 519-836-1291 https://manual-hub.com/
Date: 2020-07-13
Limited Product Warranty
Quark Carrier User Manual Users Guide
Connect Tech Inc. provides a one-year Warranty for this product. Should this product, in Connect Tech Inc.’s opinion, fail to be in good working order during the warranty period, Connect Tech Inc. will, at its option, repair or replace this product at no charge, provided that the product has not been subjected to abuse, misuse, accident, disaster or non-Connect Tech Inc. authorized modification or repair.
You may obtain warranty service by delivering this product to an authorized Connect Tech Inc. business partner or to Connect Tech Inc. along with proof of purchase. Product returned to Connect Tech Inc. must be pre-authorized by Connect Tech Inc. with an RMA (Return Material Authorization) number marked on the outside of the package and sent prepaid, insured and packaged for safe shipment. Connect Tech Inc. will return this product by prepaid ground shipment service.
The Connect Tech Inc. Limited Warranty is only valid over the serviceable life of the product. This is defined as the period during which all components are available. Should the product prove to be irreparable, Connect Tech Inc. reserves the right to substitute an equivalent product if available or to retract the Warranty if no replacement is available.
The above warranty is the only warranty authorized by Connect Tech Inc. Under no circumstances will Connect Tech Inc. be liable in any way for any damages, including any lost profits, lost savings or other incidental or consequential damages arising out of the use of, or inability to use, such product.
Copyright Notice
The information contained in this document is subject to change without notice. Connect Tech Inc. shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Connect Tech, Inc.
Copyright ♥ 2020 by Connect Tech, Inc.
Trademark Acknowledgment
Connect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred to in this document as the property of their respective owners. Not listing all possible trademarks or copyright acknowledgments does not constitute a lack of acknowledgment to the rightful owners of the trademarks and copyrights mentioned in this document.
Document: CTIM-00084 Revision: 0.03
Page 4 of 21
Connect Tech Inc. 800-426-8979 | 519-836-1291 https://manual-hub.com/
Date: 2020-07-13
ESD Warning
Revision History
Quark Carrier User Manual
Users Guide
Electronic components and circuits are sensitive to Electrostatic Discharge (ESD). When handling any circuit board assemblies including Connect Tech COM Express carrier assemblies, it is recommended that ESD safety precautions be observed. ESD safe best practices include, but are not limited to:
• Leaving circuit boards in their antistatic packaging until they are ready to be installed.
• Using a grounded wrist strap when handling circuit boards, at a minimum you should touch a grounded metal object to dissipate any static charge that may be present on you.
• Only handling circuit boards in ESD safe areas, which may include ESD floor and table mats, wrist strap stations and ESD safe lab coats.
• Avoiding handling circuit boards in carpeted areas.
• Try to handle the board by the edges, avoiding contact with components.
Revision
|
Date
|
Changes
---|---|---
0.00
|
2020-02-19
|
Preliminary Release
0.01
|
2020-02-27
|
Cable details added
0.02
|
2020-06-15
|
Orderable part numbers added
CAN Bus
• Product feature description updated
• I/O Header notes updated
USB Type C
• Power capability note added
Supported camera list removed
Weight details added
CTI thermal solutions for Xavier NX added
Mechanical Drawings added
Feature Table – GPIO / PWM description updated
0.03
|
2020-07-13
|
Product Feature and Specification:
• Added RTC Battery Support
|
|
|
|
|
|
Document: CTIM-00084 Revision: 0.03
Page 5 of 21
Connect Tech Inc. 800-426-8979 | 519-836-1291 https://manual-hub.com/
Date: 2020-07-13
Quark Carrier User Manual
Users Guide
Introduction
Connect Tech’s Quark platform brings a low cost deployable Jetson solution to the market. The Quark’s design includes 2x Gigabit Ethernet, 1 x USB 3.1 (Gen 2) Type C with OTG support, 2 x MIPI CSI-2, Camera I2C Control, 6x GPIOs, 2x PWM, 3xUART, 1x CAN, 2x I2C, 1x SPI .
Product Feature and Specifications
Feature
|
Description
---|---
Module Compatibility
|
NVIDIA® Jetson Nano™ (PRODUCTION MODULE ONLY)
NVIDIA® Jetson Xavier™ NX
Mechanical Dimensions
|
82.6mm x 58.8mm
USB Camera
|
1x USB 3.1 Gen 2 (Connector: USB Type-C)
MIPI Cameras
|
2x 2-lane MIPI CSI-2
Connector: 1-1734248-5
• 15-pin FPC 1mm Pitch Connector
• Same MIPI connector used on Nano Dev Kit
For list of supported cameras, please refer to Quark Carrier Home Page
Camera Control Interface
|
1x I2C (Can be used for Lens Control)
Internal Debug Ports
|
1x UART for Debug (I/O header)
Storage
|
1x SD Card Slot
IO – Ethernet
|
2x 10/100/1000BASE-T Uplink
IO – USB OTG
|
1x USB 2.0 OTG for Flashing Capability (Type C)
IO – UART Debug
|
1x Debug UART (I/O header)
IO – UART
|
2x UART (I/O header)
IO – CAN
|
1x CAN bus (I/O header) – Supported by Jetson Xavier™ NX only
IO – I2C
|
2x I2C bus (I/O header)
IO – SPI
|
1x SPI bus (I/O header)
IO – GPIO / PWM
|
8x GPIO (I/O header) – 1x PWM Capable
Power – RTC Battery
|
3-Pin RTC Battery Connector (Rev C and onwards)
Operating Temperature
|
-25°C to +85°C
Weight
|
33 Grams
Warranty and Support
|
1 Year Warranty and Free Support
Part Numbers / Ordering Information
Part Number
|
Description
---|---
NGX004
|
Quark Carrier, Without Jetson module
NGX004-01
|
Quark Carrier, NVIDIA® Jetson Nano™ with Thermal Transfer Plate
NGX004-02
|
Quark Carrier, NVIDIA® Jetson Nano™ with Active Heat Sink
NGX004-03
|
Quark Carrier, NVIDIA® Jetson Nano™ with Passive Heat Sink
NGX004-04
|
Quark Carrier, NVIDIA® Jetson Xavier™ NX with Thermal Transfer Plate
NGX004-05
|
Quark Carrier, NVIDIA® Jetson Xavier™ NX with Active Heat Sink
NGX004-06
|
Quark Carrier, NVIDIA® Jetson Xavier™ NX with Passive Heat Sink
Document: CTIM-00084
Page 6 of 21
Date: 2020-07-13
Revision: 0.03
Connect Tech Inc. 800-426-8979 | 519-836-1291
Quark Carrier User Manual
Users Guide
Product Overview
Block Diagram
Document: CTIM-00084
Page 7 of 21
Date: 2020-07-13
Revision: 0.03
Connect Tech Inc. 800-426-8979 | 519-836-1291
Connector Locations
RESET / Recovery Button
CAN 120Ω Termination
Fan Header
Top View
I/O Header MIPI 2 MIPI 1
Quark Carrier User Manual Users Guide
www.connecttech.com
Nano / NX Module
Connector (P3)
Power Input
+5V
USB 3.1 Gen 2
USB OTG
GBE 1 GBE 2
Document: CTIM-00084 Revision: 0.03
Bottom View
Page 8 of 21
Connect Tech Inc. 800-426-8979 | 519-836-1291 https://manual-hub.com/
MicroSD Card
Connector
Date: 2020-07-13
Quark Carrier User Manual
Users Guide
www.connecttech.com
Connector Summary
Designator
|
Connector
|
Description
---|---|---
P1A
|
52610-1572
|
MIPI CSI-2 Camera Connector
P1B
|
52610-1572
|
MIPI CSI-2 Camera Connector
P2A
|
98464-G61-10LF
|
GBE1 – Jetson onboard ethernet
P2B
|
98464-G61-10LF
|
GBE2 – I210 ethernet
P3
|
2309413-1
|
Module Board-To-Board Connector for:
• NVIDIA® Jetson Nano™
• NVIDIA® Jetson Xavier™ NX
P4
|
53047-0410
|
Jetson Fan header
P5
|
98464-G61-06LF
|
Power header (5V typical)
P6
|
5025700893
|
MicroSD Card Connector
P7
|
DF20G-40DP-1V(56)
|
I/O header
P8
|
53047-0310
|
3-pin RTC battery connector
J1
|
951102-8622-AR
|
CAN termination header
J2
|
632723300011
|
USB 3.1 Gen 2 (with OTG support)
Switch Summary
Designator
|
Connector
|
Description
---|---|---
SW1
|
EVQ-P7A01P
|
Dual Function Reset/Recovery Pushbutton
Document: CTIM-00084
Page 9 of 21
Date: 2020-07-13
Revision: 0.03
Connect Tech Inc. 800-426-8979 | 519-836-1291
Quark Carrier User Manual
Users Guide
www.connecttech.com
Detailed Feature Description
Jetson Nano™ / Xavier™ NX Module Connector
Description
The NVIDIA Jetson Nano™ / NVIDIA® Jetson Xavier™ NX processor and chipset are implemented on the Jetson Nano™ / Jetson Xavier™ NX Module. This connects to The Quark Carrier via a TE Connectivity DDR4 SODIMM 260 Pin connector.
Function
|
Description
|
---|---|---
Location
|
P3
Type
|
TE Connectivity DDR4 SODIMM 260 Pin
Carrier
Connector
|
Part Number: 2309413-1
Manufacturer: TE Connectivity
Mating
Connector
|
Jetson Nano™/Jetson Xavier™ NX Module
Pinout
|
Refer to NVIDIA’s Jetson Nano™ or Jetson Xavier™ NX
System-On-Module datasheet for pinout details
embedded/downloads
Board-to Module
Standoff Height
|
M2.5 x 6.57mm standoffs required between
NVIDIA® Jetson Nano™
or
NVIDIA® Jetson Xavier™ NX
Module and Quark Carrier
Document: CTIM-00084
Page 10 of 21
Date: 2020-07-13
Revision: 0.03
Connect Tech Inc. 800-426-8979 | 519-836-1291
Quark Carrier User Manual
Users Guide
www.connecttech.com
MIPI CSI-2 Connectors
Description
The NVIDIA Jetson Nano™ / NVIDIA® Jetson Xavier™ NX module will allow 2-Lane MIPI video input via the vertical FPC connectors.
Function
|
Description
|
---|---|---
Location
|
P1A, P1B
MIPI Lane usage
|
P1A – CSI0
P1B – CSI2
Type
|
MOLEX FPC Vertical Connector 15 Pin
Carrier Connector
|
Part Number: 0526101572
Manufacturer: MOLEX
Pinout
Pin 1
|
GND
Pin 2
|
CAM_DN0
Pin 3
|
CAM_DP0
Pin 4
|
GND
Pin 5
|
CAM_DN1
Pin 6
|
CAM_DP1
Pin 7
|
GND
Pin 8
|
CAM_CLKN
Pin 9
|
CAM_CLKP
Pin 10
|
GND
Pin 11
|
CAM_PWDN
Pin 12
|
CAM_MCLK
Pin 13
|
I2C0_SCL
Pin 14
|
I2C0_SDA
Pin 15
|
3.3V
Document: CTIM-00084
Page 11 of 21
Date: 2020-07-13
Revision: 0.03
Connect Tech Inc. 800-426-8979 | 519-836-1291
USB 3.0 Type-C Connector Description
Quark Carrier User Manual Users Guide
www.connecttech.com
The NVIDIA® Jetson Nano™ / NVIDIA® Jetson Xavier™ NX module will allow video input via the USB 3.0 Type-C connector.
Function
|
Description
|
---|---|---
Location
|
J2
Type
|
Wurth Electronics USB3.1 Type-C Connector
Carrier Connector
|
Part Number: 632723300011 Manufacturer: Wurth Electronics
Mating Connector
|
USB Type-C Cable
Pinout
|
Refer to USB3.1 Type-C Pinout
Note 1: This port can also be used for host mode access to The Quark module at 5Gbps only.
Note 2: Display devices or devices requiring 20V power modes are not supported.
Note 3: J2 can output maximum 2A. For higher current capability, please contact Sales
10/100/1000 Ethernet Connectors
Description
The NVIDIA® Jetson Nano™ / NVIDIA® Jetson Xavier™ NX module will allow internet communication via GBE connectors as below.
Function
|
Description
|
---|---|---
Location
|
P2A, P2B
Ethernet Usage
|
P2A – Jetson Onboard Ethernet P2B – I210 Ethernet
Type
|
10 pin RA connector
Carrier Connector
|
Part Number: 98464-G61-10LF Manufacturer: Amphenol ICC
Mating Connector
|
90311-010LF
Mating CTI Cable
|
CBG117
Pinout
Pin 1
|
MDI0_N
Pin 2
|
MDI0_P
Pin 3
|
MDI1_N
Pin 4
|
MDI1_P
Pin 5
|
GBE_GND (Shield)
Pin 6
|
GBE_GND (Shield)
Pin 7
|
MDI2_N
Pin 8
|
MDI2_P
Pin 9
|
MDI3_N
Pin 10
|
MDI3_P
Document: CTIM-00084 Revision: 0.03
Page 12 of 21
Connect Tech Inc. 800-426-8979 | 519-836-1291 https://manual-hub.com/
Date: 2020-07-13
Quark Carrier User Manual
Users Guide
www.connecttech.com
MicroSD Card Connector
Description
The Quark Carrier implements a MicroSD via P11 on bottom side of the carrier.
Function
|
Description
|
---|---|---
Location
|
P6
Type
|
Molex microSD Card Connector
Carrier Connector
|
Part Number: 1042391430
Manufacturer: Molex
Pinout
|
Refer to SD Card Standard
+5V Fan Connector
Description
The Quark Carrier implements a 4 Position Molex PicoBlade connector for active cooling capability.
Function
|
Description
|
---|---|---
Location
|
P4
Type
|
Molex 4 Position 1.25mm PicoBlade Connector
Carrier Connector
|
Part Number: 53047-0410
Manufacturer: Molex
Mating Connector
|
Molex 0510210400 PicoBlade Connector
Pinout
Pin 1
|
GND
Pin 2
|
+5V
Pin 3
|
FAN_TACH
Pin 4
|
FAN_PWM
Document: CTIM-00084
Page 13 of 21
Date: 2020-07-13
Revision: 0.03
Connect Tech Inc. 800-426-8979 | 519-836-1291
Quark Carrier User Manual
Users Guide
www.connecttech.com
3-Pin RTC Battery Connector
Description
The Quark Carrier implements a 3 Position Molex PicoBlade connector for connecting RTC battery. This is available from Quark Rev C and onwards.
Function
|
Description
|
---|---|---
Location
|
P8
Type
|
Molex 3 Position 1.25mm PicoBlade Connector
Carrier Connector
|
Part Number: 53047-0310
Manufacturer: Molex
Mating Connector
|
Molex 0510210300 PicoBlade Connector
Pinout
Pin 1
|
RTC Battery Positive (+ve)
Pin 2
|
Not Connect
Pin 3
|
RTC Battery Negative (-ve)
Power Header
Description
The Quark Carrier implements a Power Connector using 98464-G61-06LF from Amphenol FCI.
Function
|
Description
|
---|---|---
Location
|
P5
Type
|
Amphenol FCI MiniTek Series Connector
Carrier Connector
|
98464-G61-06LF
Mating Connector
|
90311-006LF
Mating CTI Cable
|
CBG112
Pinout
Pin 1
|
GND
Pin 2
|
GND
Pin 3
|
GND
Pin 4
|
+5V
Pin 5
|
+5V
Pin 6
|
+5V
Document: CTIM-00084
Page 14 of 21
Date: 2020-07-13
Revision: 0.03
Connect Tech Inc. 800-426-8979 | 519-836-1291
I/O Header Description
Quark Carrier User Manual Users Guide
www.connecttech.com
The Quark Carrier implements a DF20G-40DP-1V(56) Connector to allow access for additional GPIO and interfaces.
Function
|
Description
|
---|---|---
Location
|
P7
Type
|
Hirose 40Pin Connector, 1mm Pitch
Carrier Connector
|
Part Number: DF20G-40DP-1V(56)
Manufacturer: Hirose
Mating Connector
|
DF20A-40DS-1C Connector
Mating CTI Cable
|
CBG125
Pinout
Description
|
Signal
Name
|
Pin
Numbers
|
Signal
Name
|
Description
Signal Ground
|
GND
|
1
|
2
|
GND
|
Signal Ground
+3.3V Power Out
|
+3.3V
|
3
|
4
|
UART0_RX
|
UART0 Receive
+3.3V Power Out
|
+3.3V
|
5
|
6
|
UART0_TX
|
UART0 transmit
I2C0 Clock
|
I2C0_SCL
|
7
|
8
|
GND
|
Signal Ground
I2C0 Serial Data
|
I2C0_SDA
|
9
|
10
|
UART1_TX
|
UART1 Transmit
I2C1 Clock
|
I2C1_SCL
|
11
|
12
|
UART1_RX
|
UART1 Receive
I2C1 Serial Data
|
I2C1_SDA
|
13
|
14
|
GND
|
Signal Ground
Signal Ground
|
GND
|
15
|
16
|
SPI0_SCK
|
SPI0 Clock
CAN High
|
CAN_H
|
17
|
18
|
SPI0_MISO
|
SPI0 Receive
CAN Low
|
CAN_L
|
19
|
20
|
SPI0_MOSI
|
SPI0 Transmit
Signal Ground
|
GND
|
21
|
22
|
SPI0_CS0
|
SPI0 Chip Select
Force Recovery
|
FORCE
RECOVERY
|
23
|
24
|
GND
|
Signal Ground
System RESET
|
RESET
|
25
|
26
|
GPIO_01
|
GPIO1
Signal Ground
|
GND
|
27
|
28
|
GPIO_02
|
GPIO2
Debug UART
Transmit
|
UART2_TX
|
29
|
30
|
GPIO_03
|
GPIO3
Debug UART
Receive
|
UART2_RX
|
31
|
32
|
GPIO_04
|
GPIO4
Signal Ground
|
GND
|
33
|
34
|
GPIO_05
|
GPIO5
Signal Ground
|
GND
|
35
|
36
|
GPIO_06
|
GPIO6
+5V Power Out
|
+5V
|
37
|
38
|
GPIO_07
|
PWM1 / GPIO7
+5V Power Out
|
+5V
|
39
|
40
|
GPIO_08
|
GPIO8
Notes:
• +3.3V and +5V power pins are outputs only, DO NOT feed power to these pins
• CAN bus supported by Jetson Xavier™ NX only
• Different pinout options are available. Please contact CTI for customization.
Document: CTIM-00084 Revision: 0.03
Page 15 of 21
Connect Tech Inc. 800-426-8979 | 519-836-1291 https://manual-hub.com/
Date: 2020-07-13
Reset & Recovery Pushbutton Description
Quark Carrier User Manual Users Guide
www.connecttech.com
The Quark Carrier implements a dual functionality pushbutton for both Reset and Recovery of the platform. To Reset the module, simply press and hold the pushbutton for a minimum of 250 milliseconds. To put the Jetson module into Force Recovery mode, press and hold the pushbutton for a minimum of 10 seconds.
Function
|
Description
|
---|---|---
Location
|
SW1
Type
|
Panasonic EVQP7 Pushbutton
Carrier Connector
|
Part Number: EVQ-P7A01P
Manufacturer: Panasonic
Reset Button
Press
|
Minimum 250ms (typ.)
Recovery Button Press
|
Minimum 10s (typ.)
Note: A full power cycle of the system must be performed after module flashing.
LED Indicators
Description
The Quark Carrier implements an LED (D4) for power status indication as follows:
Function
|
Description
|
---|---|---
Location
|
D4
Type
|
Green LED
Carrier Connector
|
Part Number: APHHS1005CGCK Manufacturer: Kingbright
Function
|
LED
Power LED
|
D4
Typical Installation
1. Ensure all external system power supplies are off and disconnected.
2. Install the NVIDIA® Jetson Nano™ / NVIDIA® Jetson Xavier™ NX Module into the DDR4 260 Pin SODIMM Connector (P1).
Be sure to follow the manufacturer’s directions for proper installation of mounting hardware, heatsink / heat-spreader, and any other applicable requirements from the manufacturer.
3. Install the necessary cables for your application. At a minimum these would include: a) Power cable to the input power connector
b) Connect a Serial cable to UART2 pins on the I/O header
c) Keyboard and Mouse via USB (a hub may be required for multiple devices)
d) MIPI Camera(s)
e) Using CBG117, connect the system to network
4. Connect the Power Cable of the +5V Power Supply into the Power header (P5)
Plug the AC cable on the +5V Power Supply into the wall.
DO NOT power up your system by plugging in live power.
Document: CTIM-00084 Revision: 0.03
Page 16 of 21
Connect Tech Inc. 800-426-8979 | 519-836-1291 https://manual-hub.com/
Date: 2020-07-13
Quark Carrier User Manual
Users Guide
www.connecttech.com
Thermal Details
The Quark Carrier has an Operating Temperature Range of -25°C to +85°C.
However, it is important to note that the NVIDIA® Jetson Nano™ / NVIDIA® Jetson Xavier™ NX Module has its own properties separate to that of the Quark Carrier. The Quark is rated for Operating Temperature Range of -25°C to +85°C.
Customer responsibility requires proper implementation of a thermal solution that maintains The Quark SoC and Thermal Transfer Plate (TTP) temperatures below the specified temperatures (shown in the tables below) under the maximum thermal load and system conditions for their use case.
NVIDIA® Jetson Nano™
Parameter
|
Value
|
Units
---|---|---
Maximum Tegra X1 Operating Temperature
|
T.cpu = 97
|
°C
T.gpu = 97.5
|
°C
Tegra X1 Shutdown Temperature
|
T.cpu = 102.5
|
°C
T.gpu = 103
|
°C
NVIDIA® Jetson Xavier™ NX
Parameter
|
Value
|
Units
---|---|---
Maximum Xavier SOC Operating Temperature
|
T.cpu = 90.5
|
°C
T.gpu = 91.5
|
°C
Xavier SOC Shutdown Temperature
|
T.cpu = 96.0
|
°C
T.gpu = 95.5
|
°C
Cable Information
Drawing No.
|
Part No.
|
Function
|
Description
---|---|---|---
CTIC-00431
|
CBG112
|
Power Cable
|
6-pin MiniTek w/ Latch, unterminated
CTIC-00433
|
CBG117
|
Ethernet Cable
|
10-pin MiniTek w/ Latch, RJ-45 Panel Mount
CTIC-00383
|
CBG125
|
I/O Cable
|
DF20A 40 Pin, unterminated
Document: CTIM-00084 Revision: 0.03
Page 17 of 21
Connect Tech Inc. 800-426-8979 | 519-836-1291 https://manual-hub.com/
Date: 2020-07-13
Quark Carrier User Manual
Users Guide
www.connecttech.com
Connect Tech Custom Thermal Solutions
Connect Tech Inc. has three custom solutions available for customer implementation, namely, an Active Cooling Solution, Passive Cooling Solution, and Thermal Transfer Plate Solution. Please contact Connect Tech Inc. for more information regarding these options.
Connect Tech Inc. NVIDIA® Jetson Nano™ Thermal Solutions
Function
|
Part Number
|
---|---|---
Active Cooling
|
XHG309
Passive Cooling
|
XHG308
|
Thermal Transfer Plate Cooling
|
XHG310
|
Document: CTIM-00084
Page 18 of 21
Date: 2020-07-13
Revision: 0.03
Connect Tech Inc. 800-426-8979 | 519-836-1291
Quark Carrier User Manual
Users Guide
www.connecttech.com
Connect Tech Inc. NVIDIA® Jetson Xavier™ NX Thermal Solutions
Function
|
Part Number
|
TBD
---|---|---
Active Cooling
|
XHG312
Passive Cooling
|
XHG311
|
Thermal Transfer Plate Cooling
|
XHG313
|
Document: CTIM-00084
Page 19 of 21
Date: 2020-07-13
Revision: 0.03
Connect Tech Inc. 800-426-8979 | 519-836-1291
Quark Carrier User Manual
Users Guide
www.connecttech.com
Current Consumption Details
NVIDIA® Jetson Nano™
Parameter
|
Value
|
|
Units Temperature
---|---|---|---
NVIDIA® Jetson Nano™ Module, Not-Installed, Passive Cooling
|
0.3
|
W
|
25°C (typ.)
NVIDIA® Jetson Nano™ Module, Installed, Fully-Booted, Idle, Passive Cooling
|
3
|
W
|
25°C (typ.)
NVIDIA® Jetson Xavier™ NX
Parameter
|
Value
|
|
Units Temperature
---|---|---|---
NVIDIA® Jetson Xavier™ NX Module, Not-Installed, Passive Cooling
|
0.3
|
W
|
25°C (typ.)
NVIDIA® Jetson Xavier™ NX Module, Installed, Fully-Booted, Idle, Passive Cooling
|
5
|
W
|
25°C (typ.)
Software / BSP Details
All Connect Tech NVIDIA Jetson based products are built upon a modified Linux for Tegra (L4T) Device Tree that is specific to each CTI product.
WARNING: The hardware configurations of CTI’s products differ from that of the NVIDIA supplied evaluation kit. Please review the product documentation and install ONLY the appropriate CTI L4T BSPs. Failure to follow this process could result in non-functional hardware.
Mechanical Details
Document: CTIM-00084 Revision: 0.03
Page 20 of 21
Connect Tech Inc. 800-426-8979 | 519-836-1291 https://manual-hub.com/
Date: 2020-07-13
Quark Carrier User Manual
Users Guide
www.connecttech.com
Document: CTIM-00084
Page 21 of 21
Date: 2020-07-13
Revision: 0.03
Connect Tech Inc. 800-426-8979 | 519-836-1291
References
- Quark Carrier for NVIDIA® Jetson Xavier™ NX - Connect Tech Inc.
- Support - Connect Tech Inc.
- Resource Center - Connect Tech Inc.
- Connect Tech Inc., Embedded Computing Experts
- NVIDIA Developer
- Jetson Download Center | NVIDIA Developer
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>