GSD WKC12R2501 Dual Band WiFi 2×2 MIMO Module User Guide
- June 5, 2024
- GSD
Table of Contents
Technology Co., LTD
D WKC12R2501
WIFI Module
IEEE 802.11 a/b/g/n/ac 2T/2R
Model Number: WKC12R2501
Product Description
The WKC12R2501 is a complete dual-band(2.4GHz and 5GHz)WIFI 2×2 MIMO module.
This module provides a high level of integration with a dual-stream IEEE
802.11ac MAC/ baseband /radio. The WLAN operation supports 20MHz,40MHz and
80MHz channels for data rates up to 866.7Mbps. It fully complies with IEEE
802.11 a/b/g/n/ac
feature rich wireless connectivity at high standards,delivers reliable, cost-
effective, throughput from an extended distance.
Product Features
- Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n/ac 5GHz Wireless LAN
- Two transmit and Two receive path(2T2R)
- Works with all existing network infrastructure
- Capable of up to 128-Bit WEP Encryption
- Freedom to roam while staying connected
- UP to 866.7 Mbps High-Speed Transfer Rate in 802.11ac mode of operation
- Operating SystemsLinux, Win7, Win8, Win10,XP
- Low power consumption
- Easy to install and configure
- High-speed USB 2.0 interface
- ROHS compliant
Product Specification
| Product | WIFI Module |
|---|---|
| Model Name | WKC12R2501 |
| Standard | 802.11 a /b/g/n/ac |
| Interface | USB |
| Data Transfer Rate | 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum |
of 866.7Mbps
Modulation Method| DQPSK,DBPSK,CCK(802.11b)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11g) QPSK,BPSK,16QAM,64QAM with OFDM
(802.11n) QPSK,BPSK,16QAM,64QAM with OFDM (802.11a)
QPSK,BPSK,16QAM,64QAM,256QAM with OFDM (802.11ac)
Frequency Band| 2.4G: 24122462 MHz
5G: 5150-5350MHz, 5470-5725MHz, 5725-5850MHz
Operation Mode| Infrastructure
Security| WEP, TKIP, AES, WPA, WPA2
Operating Voltage| 3.3V±10%
Current Consumption| 1000mA
Antenna Type| PIFA
Operating Temperature| 0 — 70°C ambient temperature
Storage Temperature| -40 — 80°C ambient temperature
Humidity| 5 to 95 % maximum (non-condensing)
NOTICE:
- please keep this product and accessories attached to the places which children can’t touch.
- do not splash water or other liquid onto this product, otherwise, it may cause damage.
- do not put this product near the heat source or direct sunlight, otherwise, it may cause deformation or malfunction.
- please keep this product away from flammable or naked flame.
- please do not repair this product by yourself. Only qualified personnel can be repaired.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Please notice that if the FCC identification number is not visible when the
module is installed inside another device, then the outside of the device into
which the module is installed must also display a label referring to the
enclosed module. This exterior label can use wording such as the following:
“Contains FCC ID:2AC23-WKC12” any similar wording that expresses the same
meaning may be used. This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between the radiator &
your body. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. The module is limited to OEM
installation ONLY. The OEM integrator is responsible for ensuring that the
end-user has no manual instruction to remove or install the module. The module
is limited to installation in mobile applications. Separate approval is
required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and different antenna
configurations.
There is a requirement that the grantee provides guidance to the host
manufacturer for compliance with Part 15B requirements.
The module complies with FCC Part 15.247 / Part 15.407 and apply for Single
module approval.
Trace antenna designs: Not applicable.
Antennas:
| 2.4G | 5G |
|---|---|
| PCB antenna & 1.5 dBi | PCB antenna & 4.8 dBi |
The antenna is permanently attached, can’t be replaced.
Canada Statement
This device complies with Industry Canada’s license-exempt RSS. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Please notice that if the ISED certification number is not visible when the
module is installed inside another device, then the outside of the device into
which the module is installed must also display a label referring to the
enclosed module. This exterior label can use wording such as the following:
“Contains IC:12290A- WKC12” any similar wording that expresses the same
meaning may be used.
The device for operation in the band 5150-5350 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems for devices with detachable antenna(s), the maximum antenna gain
permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as appropriate;Version 1.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>