audio pro SW-10 Powered Subwoofer User Manual
- June 5, 2024
- audio pro
Table of Contents
SOUND OF SCANDINAVIA
SW-10
User manual
REAR VIEW
Change these two settings while listening and set them to what you think sounds good.
CONNECTION
SPECIFICATIONS
Type: Powered subwoofer
Amplifier: 200 W Digital Class D, DSP controlled
Woofer: 8″ long-throw
Passive radiator: 2×9″
Frequency range: 33–120 Hz
Variable crossover frequency: 40–120 Hz
Phase: 0/180 degrees
Inputs: RCA
Dimensions HxWxD: 280x280x295 mm
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this product near water.
-
Clean only with a dry cloth.
-
Operating temperature (˚C) 5–40 Humidity (%) no condensation 30–90
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Minimum distances around the product for sufficient ventilation, 10 cm.
-
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.
-
Only use attachments/accessories specified by the manufacturer.
-
Unplug this product during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Damage Requiring Service Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the product,
C. If the product has been exposed to rain or water,
D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, E. If the product has been dropped or damaged in any way, and
F. When the product exhibits a distinct change in performance this indicates a need for service. -
Object and Liquid Entry
Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. The product shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the product. No naked flame sources such as lighted candles etc. should never be placed on the product. -
Make sure that there is adequate ventilation if you install the product in confined spaces, such as bookshelves or racks. Leave a distance of 20 cm above and on both sides of the product and 10 cm behind it. The back end of a shelf or board closest to the top of the product should be pushed forward to give a gap of about 10 cm behind.
In this way, an exuding channel is formed where heated air can flow up. -
The power supply and power cord for this product are intended for indoor use only.
-
Use only the supplied power cord/adapter.
© AUDIO PRO AB, SWEDEN. ALL RIGHTS RESERVED.
TRADEMARKS ARE THE PROPERTY OF AUDIO PRO AB, SWEDEN.
Audio Pro AB, Box 22272, SE-250 24 Helsingborg, Sweden
©1978-2020 Audio Pro AB Sweden.
Audio Pro®, the Audio Pro logotype, the ‘a’ symbol, and ace-bass® are all
registered trademarks of
Audio Pro AB, Sweden. All rights reserved. Audio Pro follows a policy of
continuous advancement in development. Specifications may be changed without
notice.
All other products and services mentioned may be trademarks or service marks
of their respective owners.
THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.
audiopro.com
facebook.com/audiopro
instagram.com/audioprosounds
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>