1CM2G101 Connect Tech M.2 GbE Expansion Board User Guide
- June 6, 2024
- Connect Tech
Table of Contents
USERS GUIDE
Revision: 0.00
M.2 GbE
CTIM-00055 Revision 0.00 2021-02-25
PREFACE
Disclaimer
The information contained within this user’s guide, including but not limited
to any product specification, is subject to change without notice.
Connect Tech assumes no liability for any damages incurred directly or
indirectly from any technical or typographical errors or omissions contained
herein or for discrepancies between the product and the user’s guide.
Customer Support Overview
If you experience difficulties after reading the manual and/or using the
product, contact the Connect Tech reseller from which you purchased the
product. In most cases the reseller can help you with product installation and
difficulties.
In the event that the reseller is unable to resolve your problem, our highly
qualified support staff can assist you. Our support section is available 24
hours a day, 7 days a week on our website at: https://connecttech.com/support
/resource-center/. See the contact information section below for more
information on how to contact us directly. Our technical support is always
free.
Contact Information
Mail/Courier| Connect Tech Inc.
Technical Support
42 Arrow Road
Guelph, Ontario
Canada N1K 1S6
---|---
Contact Information|
sales@connecttech.com
support@connecttech.com
https://www.connecttech.com
Toll Free: 800-426-8979 (North America
only)
Telephone: +1-519-836-1291
Facsimile: 519-836-4878 (on-line 24
hours)
Support| Please go to the Connect Tech Resource Center for product
manuals, installation guides, device drivers, BSPs and technical tips. Submit
your technical support questions to our support engineers.
Technical Support representatives are available Monday through Friday, from
8:30 a.m. to 5:00 p.m. Eastern Standard Time.
Limited Product Warranty
Connect Tech Inc. provides a 2-year Warranty for this product. Should this
product, in Connect Tech Inc.’s opinion, fail to be in good working order
during the warranty period, Connect Tech Inc. will, at its option, repair or
replace this product at no charge, provided that the product has not been
subjected to abuse, misuse, accident, disaster or non-Connect Tech Inc.
authorized modification or repair.
You may obtain warranty service by delivering this product to an authorized
Connect Tech Inc. business partner or to Connect Tech Inc. along with proof of
purchase. Product returned to Connect Tech Inc. must be pre-authorized by
Connect Tech Inc. with an RMA (Return Material Authorization) number marked on
the outside of the package and sent prepaid, insured and packaged for safe
shipment. Connect Tech Inc. will return this product by prepaid ground
shipment service.
The Connect Tech Inc. Limited Warranty is only valid over the serviceable life
of the product. This is defined as the period during which all components are
available. Should the product prove to be irreparable, Connect Tech Inc.
reserves the right to substitute an equivalent product if available or to
retract the Warranty if no replacement is available.
The above warranty is the only warranty authorized by Connect Tech Inc. Under
no circumstances will Connect Tech Inc. be liable in any way for any damages,
including any lost profits, lost savings or other incidental or consequential
damages arising out of the use of, or inability to use, such product.
Copyright Notice
The information contained in this document is subject to change without
notice. Connect Tech Inc. shall not be liable for errors contained herein or
for incidental consequential damages in connection with the furnishing,
performance, or use of this material. This document contains proprietary
information that is protected by copyright. All rights are reserved. No part
of this document may be photocopied, reproduced, or translated to another
language without the prior written consent of Connect Tech, Inc.
Copyright 2021 by Connect Tech, Inc.
Trademark Acknowledgment
Connect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred to in this document as the property of their respective owners. Not listing all possible trademarks or copyright acknowledgments does not constitute a lack of acknowledgment to the rightful owners of the trademarks and copyrights mentioned in this document.
ESD Warning
Electronic components and circuits are sensitive to ElectroStatic Discharge (ESD). When handling any circuit board assemblies including Connect Tech COM Express carrier assemblies, it is recommended that ESD safety precautions be observed. ESD safe best practices include, but are not limited to:
- Leaving circuit boards in their antistatic packaging until they are ready to be installed.
- Using a grounded wrist strap when handling circuit boards, at a minimum you should touch a grounded metal object to dissipate any static charge that may be present on you.
- Only handling circuit boards in ESD safe areas, which may include ESD floor and table mats, wrist strap stations and ESD safe lab coats.
- Avoiding handling circuit boards in carpeted areas.
- Try to handle the board by the edges, avoiding contact with components.
REVISION HISTORY
Revision | Date | Changes |
---|---|---|
0 | 25-02-21 | Initial Release |
INTRODUCTION
The M.2 GbE expansion board adds an additional ethernet connection to any existing carrier board through the M.2 A or E key expansion slot. Ideal for customers needing to add wired network connections within space-constrained applications, this industrial grade expansion board utilizes an Intel I210 controller for optimized performance and trusted reliability.
Product Features and Specifications
Form Factor | M.2 2230 Key A+E |
---|---|
Ports | 1x 10/100/1000BASE-T |
Controller | Intel® Ethernet Controller I210-AT |
Host Interface Bus | x1 PCIe v2.1, SMBus |
Dimensions | 22mm x 30mm (M.2 Type-2230-D3-A-E) |
- (0.87” x 1.18”)
exceeds M.2 max topside height spec
Cable (Optional, not included)| CBG383 (RJ-45 Female, 8-pin Picoblade)
LEDs| Activity, Link, Power
Operating Temperature| -40º C to +85º C
*A minimum air-flow rate of 125CFM is recommended to operate
reliably at ambient temperatures over 65ºC
Weight| 3g (0.11oz)
Warranty| 2 Year Warranty and Free Technical Support
Part Numbers / Ordering Information
Part Number
M2G101| 10/100/1000BASE-T, M.2 GbE 2230 Key A+E, -40ºC to 85ºC, ROHS
PRODUCT OVERVIEW
Block Diagram
Connector Summary & Locations
Designator | Description |
---|---|
P1 | Gigabit Ethernet Connector |
D1 | Activity Indicator |
D2 | Link Indicator |
D3 | Power OK Indicator |
DETAILED FEATURE DESCRIPTION
M.2 Edge Connector
Function | M.2 Card Edge Connector |
---|---|
Location | P2 |
Pinout | Signal |
GND | 1 |
NC | 3 |
NC | 5 |
GND | 7 |
Connector Key | 9 |
Connector Key | 11 |
Connector Key | 13 |
Connector Key | 15 |
NC | 17 |
NC | 19 |
NC | 21 |
NC | 23 |
Connector Key | 25 |
Connector Key | 27 |
Connector Key | 29 |
Connector Key | 31 |
GND | 33 |
PERO+ | 35 |
PERO- | 37 |
GND | 39 |
PETO+ | 41 |
PETO- | 43 |
GND | 45 |
REFCLKO+ | 47 |
REFCLKO- | 49 |
NC | 51 |
CLKRECtO# | 53 |
PEWAKEO# | 55 |
GND | 57 |
NC | 59 |
NC | 61 |
GND | 63 |
NC | 65 |
NC | 67 |
GND | 69 |
NC | 71 |
NC | 73 |
GND | 75 |
10/100/1000 Ethernet (GbE)
Function| Gigabit Ethernet Connector|
---|---|---
Location| P1
Type| Molex Moblade 1×8 Vertical
Connector| 533980871
Mating| 510210800
Cable| CBG383
Pinout| Pin| Description
1| MX3-
2| MX3+
3| MX2-
4| MX2+
5| MX1-
6| MX1+
7| MX0-
8| MXO+
On-board Indicator LEDs
LED | Location | Description |
---|---|---|
ACT | D1 | Activity Indicator |
LINK | D2 | Link Indicator |
PWR OK | D3 | Power OK Indicator. |
When illuminated indicates power is provided to M.2 GbE board.
TYPICAL INSTALLATION
- Ensure the host system is powered off.
- Insert the M.2 GbE into a 2230 Key A or E card slot; secure the card down with a screw.
- Attach a CBG383 (RJ-45 to Picoblade) cable or custom cabling solution to P1.
- Attach a network RJ46 Cat -5e or Cat 6 cable connected to your network to the CBG383 cable
- Power on the system.
- Under Linux, use lspci to verify the presence on the M.2 GbE, then using ifconfig to verify the
M.2 GbE Card is enumerated as a network interface.
THERMAL DETIALS
The M.2 GbE card has an operating temperature range on -40°C to +85°C,
however, it is important that’s adequate cooling is provided to ensure
reliable operation. It is the customer’s responsibility to design their system
such that the ambient temperature and airflow is within specifications for the
Intel® Ethernet Controller I210-AT.
The table below illustrates simulation data from Intel®, this is just a
guideline but should be taken into account by system designers. The table
lists Tcase as a function of airflow and ambient temperature. This table can
be used as an aid in determining a starting point for the optimum airflow for
the I210.
Note that Connect Tech does not recommend use with zero airflow at ambient
temperatures over 65°C. From internal testing, it was found that at a full
1Gbps load as the ambient temperatures approach ~70°C the Tcase will exceed
100°C.
Table 13-14. Thermal Simulation Results for Various Environmental Conditions
Note: The red value(s) indicate airflow/ambient combinations that exceed the allowable case temperature.
SOFTWARE
Driver Support for Intel I210
Additional drivers may be needed to properly operate the GbE Port. These
drivers can be downloaded directly from Intel website at the below link:
https://downloadcenter.intel.com/product/64399/Intel-Ethernet-
Controller-I210-Series
CABLES
The following table shows the available cables
Part Number | Drawing Number | Description |
---|---|---|
CBG383 | CTIC-00320 | RJ-45 panel mount to 8-pin Picoblade |
Document: CTIM-00055
Date: 2021-02-25
CONNECT TECH
www.connecttech.com
support@connecttech.com
CONNECT TECH INC. | 42 ARROW ROAD, GUELPH, ON N1K 1S6 CANADA|TEL:
+1.519.836.1291|800.426.8979
References
- Connect Tech Inc., Embedded Computing Experts
- Resource Center - Connect Tech Inc.
- Intel® Ethernet Controller I210 - Product Info, Docs, Support and...
- Connect Tech Inc., Embedded Computing Experts
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>