INNOVV 4499802 K6 Camera System Instruction Manual

Protect Your Road Trip and Record Fun On The Way

BICYCLE VERSION

Product Overview

The INNOVV KG is a high-end mini camera system with 2K & 1080P which is specially designed for Bicycles and E-Bikes, featured with industrialdeading technology in the video production. The QHD video footage ensures that you will never miss a wonderful moment during your trip. The small and durable aluminum alloy case ensures an easy installation.
Product Features:

1. Dual-Camera with 2K@30FPS & 1080P@30FPS.
2. F2.0 aperture and QHD lens offering good footage quality with less distortion.
3. Support TF card with a capacity of 256GB.,
4. High-efficiency H.265 video coding offers better data compression at the same level of video quality, which helps you to save more videos,
5. The camera will be powered by an external power supply from the USB cable, which makes you less anxious about recording time.
6. Mini, simple, and user-friendly installation process and high-end aluminum alloy construction.
7. IP67 waterproof and dustproof, superior performance against water, dust and also excellent performance in high & low-temperature environments.

Brief Introduction

1. Front camera
2. DVR
3. Internal microphone
4. Button/Indicator
5. TF card input port
6. USB Type-C port
7. Screw-Holes
8. Thumb screws
9. The rear camera extension cable
10. Rear camera
11. USB cable

Product Function

1. Recording Pausing: Please go to the App and press to stop the recording.
2. Taking Pictures: Please go to the App and press to take a picture.
3. Copy the Videos: Take out the TF card from the DVR, or connect the K6 to the PC, you can copy the videos to your computer easily.
4. Factory Default Settings: Restore the default settings by holding the button for more than 10 seconds when the camera is on, release the button when the red light starts to blink (please notice that the red light will be off for a while before blinking). Blinking red light indicates that the factory default setting is done.
5. Firmware Updating (Important: the power should not be cut off during the below steps)
   Step 1: Copy the firmware (K6.bin) to the root of TF card.
   8GB and 32GB TF cards should be formatted into FAT32 in advance.
   Step 2: Insert the TF card into the DVR then turn on the camera by holding the button, the red light will flash at low light, release the button and wait for a few seconds till the updating finishes, the K6 will automatically turn on after the update, and the firmware in the card will be automatically deleted as well.

TF Card Instruction

1. You are suggested to select a TF card that fits K6 with a capacity from 8GB to 256GB. The TF card should have a writing speed higher than U3.
2. In order to get better compatibility, please connect INNOVV App in your mobile phone with K6, then format the TF card in the App settings.
3. Please insert the TF card and connect the Type-C connector to the DVR with the guidance of this manual to avoid any DVR or TF card damage.

Installation

TF Card & Connector Connection

1. Unscrew the screws by a wrench or hand.
2. Hold the DVR and pull out the Type-C connector, insert the TF card into the card slot, please refer to the left picture.
3. Please Confirm the TF card is inserted properly and the silicon ring is placed correctly, then connect the Type-C connector cable back to the DVR and tighten the screws (Please partially and alternately tighten between both screws).

*Please note that the improper TF card insertion or unsealed silicon ring may cause the malfunction of recording and waterproofness.

Power Supply Information

The INNOVV KG is designed to be powered by a standard external power supply with a USB port, it requires the power supply with DC 5V+0.5V/2A+0.5A.
Power bank, USB Power outlet, mobile phone adaptor and other standard 5V USB power supplies are recommended, an unqualified one may cause the malfunction such as start-up failure, shut down randomly, or even damage the DVR.
Product Installation
Please install the camera system by following the guidance below
DVR Installation

1. M412 mm2 pcs
2. Lower bracket
3. Upper bracket
4. M516 mm1pcs
5. DVR/Front camera
6. 3M rubber cushion
7. U shape bracket

Rear Camera Installation

1. Upper bracket slide
2. M612 mm1 pcs
3. Rubber ring
4. Lower bracket slide
5. Small block
6. M68 mm2 pcs
7. 3M rubber cushion
8. U shape bracket
9. Rear camera
10. M425 mm3 pcs

Installation Position and Wiring Arrangement
Notice:

1. To avoid cable breakage, please reserve enough length of cable in the front of the bike.
2. In order to get a better video angle, please go to the App preview interface while installing the system.
3. The USB connector is a standard one without any locking function, please reserve enough length for the USB cable to avoid any unexpected force to cause USB looseness.
4. Please use cable pads to fix all cables, which make the installation neat and also avoid damage.

1. DVR/Front camera
2. DVR mount
3. Power bank (not included)
4. Self-adhesive pad
5. Rear camera
6. Rear camera mount

App Operation

Ree Download
iPhone: Please search the INNOVV App in the Apple store or scan the QR code on the right, and install it on your phone.
Android: Please search the INNOVV App in Google Play or scan the QR code on the right, and install it on your phone.
Please power on the K6, then search the INNOVV Wi-Fi (INNOVV_K6_xxxx) and connect it with the default password 12345678.
*The green light indicator in the K6 DVR will be solid on after the Wi-Fi is connected.

https://apps.apple.com/cn/app/innovv/id1235353801| https://play.google.com/store/apps/details?id=cn.rxt.case.innovv
---|---
For Apple Device| For Android Device

Notice:

1. You may get a message that “Allow “INNOVV” to use your location?” for the first time when you enter the App, please click “Allow while using App”.
2. You may get a message “INNOVV Would Like to Access Your Photos” for the first time when you enter the App, please click “Allow Access to All Photos”.
   *Some Android users may get a message that “This WLAN network has no intemet access, Connect anyway?”, please click “CONNECT” to continue the network connection, or the App will not be able to connect to the DVR.
3. You may get a message that “Please ensure the device is connected” in the network connection, please click “OK”, or the App will not be able to connect to the DVR.

App Interface

Indicator Instructions

Button & Light Indicators Status

Operation| App Interface| Button| Red Light / Recorder| Green Light / Wi-Fi
Turn On / Recording| –| Hold the button for 3 seconds| Solid On| Flashing
Turn Off| –| Hold the button for 3 seconds| Off| Off
Taking a Picture| Yes| –| Flash Once| –
Protected Video Saving| –| Short press the button| Flash twice in a very short time| –
Wi-Fi Connecting| –| Double Click| –| Flashing
Record Pause| Yes| –| Flashing| –
TF Card Faulty| Warning in the “Card Detection’| –| Quick Flashing| –
Firmware Updating| –| –| Alternate flashing between two lights
Wi-Fi Disconnected| –| –| –| Flashing
Wi-Fi Connected| –| –| –| Solid On
Wi-Fi Off| –| –| –| Off

Specifications

Packing List

Customer Support
For more information about INNOVV products and accessories, please refer to www.innovv.com or www.innovv- powersports.com.
For any suggestions or customer support, please contact us by sending an E-mail to cs@innovv.com.

Troubleshooting

check if the camera is parallel to the ground and confirm if the screws are tightened enough.
2| The DVR mount gets loose even though the screws are tightened.| Please add a silicon plate to strengthen the resistance between the bracket and handlebar.
3| The video is blurry.| Please check if the lenses are clean without any finger marks, dust or other smudges, and wipe the lenses with dust-free cloth.
4| The K6 can not be turned on, or shut down automatically.| Please check if the power supply is with DC 5V / 2A.
5| The K6 fails to record and the red light is flashing.| Please check if the TF card is inserted properly or select another TF card and try again.
6| The K6 Wi-Fi can not be found.| Please check whether the green light on the DVR is blinking or not, please press the button twice for a short time to activate the Wi-Fi if you find the green light is not on.
7| Forget the password of the INNOW Wi-Fi.|  Please reset the DVR to the default setting. The default password is 12345678.
8| There is no audio in the video.| 1. Please check if the microphone is off in the App settings.
2. Please check if the microphone input hole in the DVR is blocked or not.
9| Video froze when it is played or downloaded in the App.| 1. The distance between your phone and the camera should be within 2m, and be sure there is no obstacle or interference sources around.
2. You are suggested to operate the App on a mainstream mobile phone to get a better experience.

Important Information

1. The INNOVV KG is a high-precision product that should not be dropped or severely impacted.
2. Please insert the TF card and connect the connector by the guidance of this user manual in order to avoid any damage to the DVR or TF card due to wrong operation.
3. Please power the K6 with a standard 5V power supply, an unqualified one may cause product failures such as start-up failure, shut down randomly, or even damage the DVR.
4. To avoid the malfunction of waterproofness and Wi-Fi connection, please make sure the silicon ring is placed correctly before connecting the connector to the DVR.
5. Please select a TF card with a writing speed higher than U3, unqualified TF cards may not work properly.
6. Strong magnetic area such as magnet or electronic motor will cause product failures such as video quality problems and audio problems. Please keep the DVR away from them.
7. Please do not keep the TF card close to objects with strong magnetic to avoid any TF card file loss.
8. Please store the K6 in a dry, cool, dust-free environment in proper temperature.

The instruction manual was made in October 2023. Due to product upgrades, INNOVV reserves the right to make final revisions to the instruction manual without further notice.

MOTORCYCLE VERSION

Product Overview
The INNOVV KG is a high-end mini camera system with 2K & 1080P which is specially designed for Motorcycles and E-Bikes, featured with industrial- leading technology in the video production.
The QHD video footage ensures that you will never miss a wonderful moment during your trip. The small and durable aluminum alloy case ensures an easy installation.
Product Features:

1. Dual-Camera with 2K@30FPS & 1080P@30FPS.
2. F2.0 aperture and QHD lens offering good footage quality with less distortion.
3. Support TF card with a capacity of 256GB.
4. High-efficiency H.265 video coding offers better data compression at the same level of video quality, which helps you to save more videos.
5. 5.Two power supply options: USB/DC converter, ensuring you are less anxious about recording time.
6. Mini, simple, and user-friendly installation process and high-end aluminum alloy construction.
7. IP67 waterproof and dustproof, superior performance against water, dust and also excellent performance in high & low-temperature environments.

Brief Introduction

1. DVR
2. Front camera
3. Microphone
4. Button/Indicator
5. TF card slot
6. Type-C USB port
7. Screw-Hole
8. The screws to fix the Type-C connector in the K6 DVR
9. The rear camera extension cable
10. Rear camera
11. The DC converter extension cable
12. DC converter
13. USB cable

Product Function

1. Recording Pausing: Please go to the App and press to stop the recording.
2. Taking Pictures: Please go to the App and press to take a picture.
3. Copy the Videos: Take out the TF card from the DVR, or connect the K6 to the PC, you can copy the videos to your computer easily.
4. Factory Default Settings: Restore the default settings by holding the button for more than 10 seconds when the camera is on, release the button when the red light starts to blink (please notice that the red light will off be for a while before blinking). Blinking red light indicates that the factory default setting is done.
5. Firmware Updating (Important: the power should not be cut off during the below steps)
   Step 1: Copy the firmware (K6.bin) to the root of TF card.
   8GB and 32GB TF cards should be formatted into FAT32 in advance.
   Step 2: Insert the TF card into the DVR then turn on the camera by holding the button, the red light will flash at low light, release the button and wait for a few seconds till the updating finishes, the K6 will automatically turn on after the update, and the firmware in the card will be automatically deleted as well.

TF Card Instruction

1. You are suggested to select a TF card that fits K6 with a capacity from 8GB to 256GB. The TF card should have a writing speed higher than U3.
2. In order to get better compatibility, please connect INNOVV App in your mobile phone with K6, then format the TF card in the App settings.
3. Please insert the TF card and connect the Type-C connector to the DVR with the guidance of this manual to avoid any DVR or TF card damage.

Installation
TF Card & Connector Connection

1. Unscrew the screws by a wrench or hand.
2. Hold the DVR and pull out the Type-C connector, insert the TF card into the card slot, please refer to the left picture.
3. Please Confirm the TF card is inserted properly and the silicon ring is placed correctly, then connect the Type-C connector cable back to the DVR and tighten the screws (Please partially and alternately tighten between both screws).

*Please note product failures such as recording failure or water leakage will be cause by improper TF card insertion or unsealed silicon ring.
DC Converter Installation

1. Connect the power connector to DVR.
2. DC converter.
3. Indicator: Red light indicates low voltage. Blue light solid on indicates stand by. Blue light flashes indicate working.
4. ACC power cord (yellow), controls on and off.
5. Motorcycle ignition switch.
6. Fuse holder.
7. Red wire (connected to the positive of battery).
8. Black wire (connected to the negative of the battery).
9. Motorcycle battery.

For USB power supply, please refer to the K6 bicycle version manual on the back.
Product Innstallation
Please install the camera system by following the guidance below
DVR Installation

1. DVR
2. U shape bracket
3. Rubber cushion
4. M5 nut
5. Screw M514 mm1 pcs
6. L bracket
7. Sticker base
8. Screw M519 mm1 pcs
9. 3M sticker
10. Screw M68 mm1 pcs
11. Rubber slide
12. Upper bracket
13. Lower bracket
14. Screw M625 mm2 pcs

Rear Camera Installation

1. L bracket
2. M612 mm1 pcs
3. Rubber slide
4. Alumium block
5. Screw M68 mm2 pcs
6. Rear camera
7. U shape bracket
8. Rubber cushion

Installation Position and Wiring Arrangement
Notice:

1. To avoid cable breakage, please reserve enough length of cable in the front of the motorcycle.
2. In order to get a better video angle, please go to the App preview interface while installing the system.
3. All cable connectors should be mounted in place and locked, please reserve enough the length of the cable connector to avoid strong extrusion and bending phenomena, and damage to the connector or wire harness.
4. Please use cable ties to fix all cables, which makes the installation neat and also avoids damage.

App Operation
iPhone: Please search the INNOVV App in the Apple store or scan the QR code on the right, and install it on your phone.
Android: Please search the INNOVV App in Google Play or scan the QR code on the right, and install it on your phone.
Please power on the K6, then search the INNOVV Wi-Fi (INNOVV_K6_xxxx) and connect it with the default password 12345678.
*The green light indicator in the K6 DVR will be solid on after the Wi-Fi is connected.

https://apps.apple.com/cn/app/innovv/id1235353801| https://play.google.com/store/apps/details?id=cn.rxt.case.innovv
---|---
ForApple Device| For Android

Notice:

1. You may get a message that “Allow “INNOVV” to use your location?” for the first time when you enter the App, please click “Allow while using App”.
2. You may get a message “”INNOVV Would Like to Access Your Photos” for the first time when you enter the App, please click “Allow Access to All Photos”.
   *Some Android users may get a message that “This WLAN network has no internet access, Connect anyway?”, please click “CONNECT” to continue the network connection, or the App will not be able to connect to the DVR.
3. You may get a message that “Please ensure the device is connected” in the network connection, please click “OK”, or the App will not be able to connect to the DVR.

App Interface

Indicator Instructions

Button & Light Indicators Status

Operation| App Interface| Button| Red Light / Recorder| Green Light / Wi-Fi
Turn On / Recording| –| Hold the button for 3 seconds| Solid On| Flashing
Turn Off| –| Hold the button for 3 seconds| Off| Off
Taking a Picture| Yes| –| Flash Once| –
Protected Video Saving| –| Short press the button| Flash twice in a very short time| –
Wi-Fi Connecting| –| Double Click| –| Flashing
Record Pause| Yes| –| Flashing| –
TF Card Faulty| Warning in the “Card Detection’| –| Quick Flashing| –
Firmware Updating| –| –| Alternate flashing between two lights
Wi-Fi Disconnected| –| –| –| Flashing
Wi-Fi Connected| –| –| –| Solid On
Wi-Fi Off| –| –| –| Off

Specifications

Packing List

pcs
Accessory Package| 2 sets| DC Converter| 1 pcs
USB Cable| 1 pcs| Manual| 1 pcs

Customer Support
For more information about INNOVV products and accessories, please refer to www.innovv.com or www.innovv- powersports.com.
For any suggestions or customer support, please contact us by sending an E-mail to cs@innovv.com.

Troubleshooting

check if the camera is parallel to the ground and confirm if the screws are tightened enough.
2| The DVR mount gets loose even though the screws are tightened.| Please add a silicon plate to strengthen the resistance between the bracket and handlebar.
3| The video is blurry.| Please check if the lenses are clean without any finger marks, dust or other smudges, and wipe the lenses with dust-free cloth.
4| The DVR is not working after motorcycle ignition on| Please check if the power supply is with DC 5V / 2A.
5| The K6 fails to record and the red light is flashing.| Please check if the TF card is inserted properly or select another TF card and try again.
6| The K6 Wi-Fi can not be found.| Please check whether the green light on the DVR is blinking or not, please press the button twice for a short time to activate the Wi-Fi if you find the green light is not on.
7| Forget the password of the INNOVV Wi-Fi.|  Please reset the DVR to the default setting. The default password is 12345678.
8| There is no audio in the video.| 1.Please check if the microphone is off in the App settings.
2.Please check if the microphone input hole in the DVR is blocked or not.
9| Video froze when it is played or downloaded in the App.| 1.The distance between your phone and the camera should be within 2m, and be sure there is no obstacle or interference sources around.
2.You are suggested to operate the App on a mainstream mobile phone to get a better experience.

Important Information

1. The INNOVV KG is a high-precision product that should not be dropped or severely impacted.
2. Please insert the TF card and connect the connector by the guidance of this user manual in order to avoid any damage to the DVR or TF card due to wrong operation.
3. Please power the K6 with a standard 5V power supply, an unqualified one may cause product failures such as start-up failure, shut down randomly, or even damage the DVR.
4. To avoid the malfunction of waterproofness and Wi-Fi connection, please make sure the silicon ring is placed correctly before connecting the connector to the DVR.
5. Please select a TF card with a writing speed higher than U3, unqualified TF cards may not work properly.
6. Strong magnetic area such as magnet or electronic motor will cause product failures such as video quality problems and audio problems. Please keep the DVR away from them.
7. Please do not keep the TF card close to objects with strong magnetic to avoid any TF card file loss.
8. Please store the K6 in a dry, cool, dust-free environment in proper temperature.

The instruction manual was made in October 2023. Due to product upgrades, INNOVV reserves the right to make final revisions to the instruction manual without further notice.

INNOVV K6 Camera System
Intended For Powersports
(Motorcycle, E-bike, Bicycle, ATVs & Others)
www.innovv.com 
www.innovv-powersports.com

Documents / Resources

| INNOVV 4499802 K6 Camera System [pdf] Instruction Manual
4499802 K6 Camera System, 4499802, K6 Camera System, Camera System, System
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>