VIVITAR NECK-R-FD Bluetooth Neckbuds User Manual
- June 6, 2024
- Vivitar
Table of Contents
NECK-R-FD
FCCID:2AL9B-NECKR
NECK-R-FD I USER’S MANUAL
Specifications
Bluetooth Range: Up to 33 feet (10 meters)
Battery Type: Lithium Ion Battery
Power Supply: DC 5V 1A
Charge Time: Approximately 1-2 Hours
Play Time: Approximately 4 hours
Applicable at 50% of maximum volume for Android devices. Results may vary when volume is different or when using iOS devices.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Sakar International is under
license. Other trademarks and trade names are those of their respective
owners.
A Quick Look
Charging
-
The included USB charging cable has a Micro USB plug and a standard USB plug.
-
Insert the USB charging cable’s Micro USB plug into the charging port on your neck buds.
-
Insert the charging cable’s USB plug into the USB port of a computer or suitable USB charging adapter.
-
The LED indicator light turns red while the neckbuds are charging then turns blue once charging is complete.
Bluetooth Pairing
-
Press and hold the power button to power on your neckbuds.
-
The LED indicator lights will alternately flash red and blue to indicate that your neckbands are in pairing mode.
-
Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to the device listed as “NECK-R-FD.”
-
The LED indicator light will slowly flash blue to indicate that your neckbands are paired with your phone.
Using Your Neckbuds
-
Press and hold the power button to power on or power off your neckbuds.
-
Press the PLAY/PAUSE button to play or pause a track.
-
Press the ANSWER button to answer or end a phone call.
-
Press and hold the ANSWER button to reject a phone call.
Important Safety Precautions
When using your Vivitar Bluetooth Neckbuds, basic safety precautions should always be followed, including the following:
- READ ALL INSTRUCTIONS BEFORE USING YOUR NECKBANDS.
- Do not use your neckbands near water. Clean using a dry or slightly moist cloth.
- Do not place your neck buds on any wet surfaces.
- Do not allow children or the infirm to play with your neck buds without adult supervision.
- Do not expose your neck buds to excessive heat, flames, or fire.
- Always press all buttons carefully. Do not manhandle your neckbuds.
- Do not use in extremely dry environments, as this can lead to static discharge during usage.
- Do not expose your neckbands to temperatures above 40°C. Keep out of direct sunlight.
- Do not attempt to repair this product yourself. Contact a qualified service center if your neck buds are in need of service.
- Do not drop, puncture or expose your neck buds to excessive trauma.
- Your neck buds are not intended for commercial use.
- Do not place near objects that generate a strong magnetic field.
- Use only the supplied charging cables. Unplug this device when not in use for long periods of time or during lightning storms.
- Please recycle or dispose of your neck buds properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your neckbands for further information.
Controlling Music
| Tap the “+” Button to
return to the last track in a playlist.| 
| Tap
the “-” Button to advance to the next track in a playlist.
---|---|---|---
| Press and hold Volume +
Button to increase the volume.| 
| Press and hold
Volume – Button to decrease the volume.
Vivitar One Year Warranty
This warranty covers the original consumer purchaser only and is not
transferable.
This warranty covers products that fail to function properly UNDER NORMAL
USAGE, due to defects in material or workmanship. Your product will be
repaired or replaced at no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship
and damages or malfunctions from other than normal use, including but limited
to, repair by unauthorized parties, tampering, modification, or accident.
To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 in the U.S. or
visit our website at www.vivitar.com.
To receive a Warranty service along with the name and address of an authorized
product service center, the original consumer purchaser must contact us for
problem determination and service procedures. Proof of purchase in the form of
a bill of sale or receipted invoice, evidencing that the product is within the
applicable warranty period(s), MUST be presented in order to obtain the
requested service. It is your responsibility to properly package and send any
defective products along with a dated copy of proof of purchase, a written
explanation of the problem, and a valid return address to the authorized
service center at your expense. Do not include any other items or accessories
with the defective product. Any products received by the authorized service
center
that is not covered by warranty will be returned unrepaired.
© 2020 Sakar International 195 Carter Drive Edison, NJ 08817
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>