t akustik ABSORBER Plate Flex Instruction Manual
- October 30, 2023
- t akustik
Table of Contents
t akustik ABSORBER Plate Flex
Product Information
The Absorber Plate flex 140 and Absorber Plate flex 80 are products designed to optimize room acoustics. They come with mounting accessories and feet for placement on a table or floor. These products are intended for indoor use only and any other use or use under other operating conditions is considered improper and may result in personal injury or property damage. The product packaging is made of environmentally friendly materials that can be recycled.
Product Usage Instructions
- Open the package carefully and avoid using long, sharp tools for opening the package to prevent damage to the absorber.
- Remove the products from the packaging and read the mounting instructions carefully.
- Remove the mounting accessories and protective film from the absorber.
- Slide the two feet onto the absorber at the desired position.
- Place the absorber on the feet onto the table or floor.
- If you wish to mount the absorber on a wall or ceiling, other brackets are optionally available.
- Dispose of plastic bags, packaging, etc. properly and ensure that they are not within reach of babies and young children to avoid choking hazards.
For more solutions and installation guides, visit our website at www.takustik.com. Share your installation with us on Instagram at www.takustik.com/instagram. Please follow the notes and markings onthe packaging for proper disposal of packaging materials.
MOUNTING INSTRUCTIONS
ABSORBER
These instructions are for the following products: Absorber Plate flex 140,
Absorber Plate flex 80
UNBOXING
Open the package carefully! Inserting sharp objects into the package can
damage the absorber. Avoid using long, sharp tools for opening the package!
REMOVE PRODUCTS FROM PACKAGING
Carefully remove the products from the package and read the mounting
instructions carefully. Remove the mounting accessories and the absorber
remove the protective film of the absorber.
FIXING THE FEET
Slide the two feet onto the absorber at the desired position.
PLACING THE ABSORBER
Place the absorber on the feet onto the table or on the floor.
TIP:
For further types of application, as for example the wall or ceiling mounting,
other brackets are optionally available.
- Find more solutions for your room on our website: www.takustik.com
- Share your installation with us on Instagram: www.takustik.com/instagram
- Find more installation guides on YouTube: www.takustik.com/youtube
This product is intended to be used to optimise the room acoustics. Any other use or use un-der other operating conditions is considered to be improper and may result in personal inju-ry or property damage. No liability will be assumed for damages resulting from improper use.
warning: Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard!
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, pa-ckaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 541794_541791_540091558358…_13.01.2023