Muzata CK01 Cable Railing Kit Hardware User Guide
- June 17, 2024
- Muzata
Table of Contents
Muzata CK01 Cable Railing Kit Hardware
Specifications
- Model: CK01
- Material: T304 Stainless Steel
- For wire size: 1/8 inch
- Finishing: Natural
Product Information
The Muzata CK01 is a cable railing set designed with a wide-adjustable range. The multi-angle turnbuckle allows rotation from 0-180 degrees, suitable for both level and angled sections. It is specifically designed for wood posts, ensuring easy installation. Constructed from T304 stainless steel, this cable railing set is ideal for indoor and outdoor projects.
Installation Steps
For level railing
- Step 1: Locate hole positions and drill through holes on intermediate posts using a drill guide and a 9/32 drill bit.
- Step 2: Pass the cable through the level protector sleeves and intermediate posts.
- Step 3: Fix the eye strap onto the left post with screws.
- Step 4: Put the thimble and cable through the eye strap, then pass the cable through the aluminum sleeve. Use the hydraulic crimper tool to crimp the aluminum sleeve.
- Step 5: Loosen the turnbuckle.
- Step 6: Put the turnbuckle into the eye trap, then lock the eye strap with screws on the right post.
- Step 7: Pull the cable through the turnbuckle, thimble, and aluminum sleeve. Crimp the sleeve with the hydraulic crimper.
- Step 8: Tighten the turnbuckle screw with a screwdriver.
- Step 9: Tighten the nut and finish the installation.
- Step 10: Follow the sequence to install other cable runs. Installation videos are available on our product pages for further details if needed.
Tips
- (1) Ensure that your posts and handrail are properly installed before starting cable installation.
- (2) Consider buying extra materials in case some are not reusable after operation mistakes.
- (3) The overall height of the railing (including handrail) should be equal to or higher than 36 inches to meet residential building codes in most states.
- (4) Use 3 cable spacing and maintain 200 lbs tension on each cable line to pass the 4 sphere test required by some states. Purchase a tension gauge online or from local stores.
FAQ
-
Q: Do I need any special tools for installation?
A: The essential tools required for installation are typically included in the package. However, you may need basic tools like a drill, screwdriver, and a hydraulic crimper tool for proper installation. -
Q: Can this railing set be used for outdoor applications?
A: Yes, the T304 stainless steel construction makes it suitable for both indoor and outdoor projects, ensuring durability and resistance to environmental elements. -
Q: Is professional assistance recommended for installation?
A: While the installation process is designed for DIY enthusiasts, professional assistance is recommended if you are unsure about any step or if you encounter difficulties during installation. -
Q: How can I get design assistance for my project?
A: We offer a free custom cable railing design service to help you plan, design, and budget your project. Reach out to our experts for personalized assistance without any additional charges.
CK01
Overview
Muzata CK01 is a cable railing set with wide-adjustable range. The multi-angle turnbuckle could be rotated from 0-180 degrees, ideal for both level and angled sections. It’s designed for wood posts for easy installation. The T304 stainless steel material makes it ideal for both indoor and outdoor projects.
Specifications
Items related
Listed below are all of the accessories and tools related to the Muzata CK01. Please note that not all items are essential. Some may not be included in your package. If you need them, you may need to purchase them separately.
Installation steps
For level railing
- Step 1 – Locate hole positions, drill through holes with drill guide and a 9/32″ drill bit ➓ on the intermediate posts.
- Step 2 – Pass the cable through the level protector sleeves ➑ and intermediate posts.
- Step 3 – Fix the eye strap ➋ onto the left post with screws ➍.
- Step 4 – Put the thimble ➌ and cable through the eye strap➋, then pass cable through the aluminum sleeve ➎ , use the hydraulic crimper tool ➐ to crimp the aluminum sleeve ➎.
- Step 5 – Loosen the turnbuckle ➊.
- Step 6 – Put the turnbuckle ➊ into the eye trap ，then lock the eye strap ➋ with screws ➍ on the right post.
- Step 7 – Pull cable through the turnbuckle ➊ , thimble ➌ and aluminum sleeve ➎, then crimp the sleeve with the hydraulic crimper ➐.
- Step 8 – Tighten the turnbuckle ➊ screwdriver.
- Step 9 – Tighten the nut and finish the installation.
- Step 10 – Follow the sequence to install other cable runs.
Please note that installation videos are available on our product pages for further details if needed.
Tips
- Ensure that your posts and handrail are properly installed before your start cable installation.
- You might have to buy a few more materials than expected in case some materials might not be reusable after operation mistakes.
- The overall height of the railing (includes handrail) should be equal or higher than 36″ to meet residential building codes of most states.
- 3″ cable spacing and 200 lbs tension on each cable line is recommended in order to pass the 4″ sphere test (required by some states). You can buy a tension gauge online or from local stores.
Free design service
We offer custom cable railing design service for free. If you are a beginner
or not sure about how to do it, please reach us. Our experts can do all the
planning, designing and budget work for you without extra charge.
About Muzata
MUZATA has helped millions of families with their cable railing projects during the past years. We believe that home renovation should be easy and affordable. So we work with every effort to provide quality products and professional service, to make Muzata a reliable brand.
Follow Us
Documents / Resources
|
Muzata CK01 Cable Railing Kit
Hardware
[pdf] User Guide
CK01 Cable Railing Kit Hardware, CK01, Cable Railing Kit Hardware, Railing Kit
Hardware, Kit Hardware, Hardware
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>