MUNBYN ITPP072 Thermal Printer User Guide
- June 17, 2024
- MUNBYN
Table of Contents
ITPPO72
Thermal Printer
Easy Setup Guide MORE CHOICE
FOR YOUR
GROWING BUSINESS
Introduction
This document describes the setup procedure for the ITPP072.
Please read the instructions before using the printer.
For detailed instructions, please refer to the ITPP072 Thermal Printer manual.
ITPPO72 Thermal Printer Manual:
munbyn.biz/072UserManual
https://bit.ly/072UserManual?r=qr
Notice: When dealing with links that require attention to case-sensitive letters and numbers, it’s important to be mindful of the exact casing used in the link.
Check the Packing List
In case of omission or damage, please contact us via the contact details below.
https://wa.me/qr/UTUXFZQZF2LHA1https://www.facebook.com/munbyn/
support@munbyn.com
+1 6502062250
munbyn
Monday to Friday 24 hours
Paper Loading
- Press the cover opening button and then open the cover.
- Insert a roll of paper in the direction shown in the illustration.
- Pull the end of the paper out straight, and push down the printer cover to close.
Initial Setup
4.1 Set Up the ITPPO72 for First Use on Windows
4.1 Download Windows Driver
You can get the driver by clicking the link below to download the driver.
Driver download: munbyn.biz/072UserManual
Setting tool download: Munbyn.biz/WTool
Notice: When dealing with links that require attention to case-sensitive
letters and numbers, it’s important to be mindful of the exact casing used in
the link.
4.1.2 USB Interface
- Connect the printer to the power outlet via the power cord.
- Connect the printer to your Windows computer via USB.
- Place the thermal paper into the printer and power it on.
Open the
downloaded driver and install it.
Demo video: Munbyn.biz/072WindU
https://munbyn.biz/075WindU?r=qr
4.1.3 LAN Interface
- To connect the printer to the router, use a network cable when the printer is turned off. Power on the printer and wait for it to automatically configure the IP address, which should take around 15 seconds.
- Open the driver on your Windows computer and follow the installation Path:
1.Printer interface: Select [LAN], the printer IP address will be displayed in the white box on the right.
2.IP address Check: Select and double-click the printer’s IP address in the white box until the IP address is also displayed in the bottom white box.
3.Click [installing the printer driver] Demo video: Munbyn.biz/072WindLANhttps://bit.ly/072WindLAN?r=qr
4.2 Set Up the ITPPO72 for First Use on MacBook
4.2.1 Download MacBook Driver
You can click the link below to download the driver.
Driver download: munbyn.biz/MACD
https://munbyn.biz/075WindU?r=qr
4.2.2 USB Interface
- Connect the printer to the power outlet via the power cord.
- To connect the printer to your Mac, plug one end of the USB cable into your Mac’s USB port and the other end into the printer. If needed, use a USB-A to USB-C adapter for Macs with a USB-C port.
- Place the thermal paper into the printer and power it on.
Open the
downloaded driver and install it.
Demno video: Munbyn.biz/072MACU
4.23 LAN Interface
- To connect the printer to the router, use a network cable when the printer is turned off. Power on the printer and wait for it to automatically configure the IP address, which should take around 15 seconds.
Open the
downloaded driver and install it, then follow the demo video to configure the
LAN.
Demo video: Munbyn.biz/072MACLAN
4.3 Set Up the ITPPO72 for First Use on Ubuntu
4.31 Download Ubuntu Driver
You can click the link below to download the driver.
Ubuntu driver or Raspberry Pi driver download link:
munbyn.biz/ubuntud
Notice: This driver file is not compatible with 32-bit.
4.3.2 USB Interface
- Connect the printer to the power outlet via the power cord.
- Connect the printer to your Ubuntu computer via USB.
- Place the thermal paper into the printer and power it on.4) Open the downloaded driver and install it accordding to the video.
Demo video: munbyn.biz/072ubuntuyU
https://munbyn.biz/072MACLAN?r=qr
4.3.3 LAN Interface
Connect your computer to the wireless router. Please see the picture below.
Setting IP
address of the printer. Open your favorite web browser and navigate to
[http://localhost-631/printers] to add the printer port accordding to the
video.
Demo video: Munbyn.biz/072ubuntulAN
https://munbyn.biz/072ubuntuLAN?r=qr
4.4 Set Up the ITPPO72 for First Use on ChromeOS
4.41 Download ChromeOS Driver
You can click the link below to download the driver.
Driver download link: Munbyn.biz/chromeos
4.4.2 USB Interface
-
Toinstall the [POS Printer Manager] extension and connect your ticket printer, you need to add the extension in your browser.
Specific steps are as follows:
a.0pen the browser and click on the three dots in the top right corner of the browser menu. Select [More tools], and select [Extensions].b.Turn on the developer mode in the upper right corner of the extension page, click [Load unpacked] extension in the upper left corner, and select the unzipped extension program folder, at this time, you can see the installed [POS Printer manager] extension program on the page. -
Connect the printer to the power outlet via the power cord,and connect the printer to your ChromeBook computer via USB.Place the thermal paper into the printer and power it on.Connect the printert accordding to the video.
ChromeOS Connection System demo video:
munbyn.biz/O72chromeosvideo
https://munbyn.biz/072chromeosvideo?r=qr
Contact us
MUNBYN provides 18 months warranty and lifetime free service.
If you encounter any issues with the product, please contact the MUNBYN team
to promptly receive troubleshooting tips or a replacement.
Email: support@munbyn.com
(24-7 online support)
Website: www.munbyn.com
(how-to videos)
WhatsAPP: +8618144898200
+1 6502062250
Support: +1 650 206 2250