QUOIZEL LWS6412C1 Brushed Nickel Flush Mount Light User Guide
- June 17, 2024
- QUOIZEL
Table of Contents
QUOIZEL LWS6412C1 Brushed Nickel Flush Mount Light
USE AND CARE GUIDE
ITEM ARTICLE # 5644948
MODEL # LWS6412C1
-
LIGHT FLUSH MOUNT CEILING FIXTURE
Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service
department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00
p.m., EST, Friday.
For the quickest response, please visit Quoizel.com and click on Contact Us.
1-844-564-3055
E-mail: cs@quoizel.com
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
LIGHT SOURCE
1. BULB REQUIRED (SOLD SEPARATELY)
- Please check with bulb manufacturer for dimming capabilities.
BULB COMPARISION
TOOLS REQUIRED
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY | Stock Part# |
|---|---|---|---|
| A | Crossbar Assembly | 1pc | 916270KIT |
| B | Wire Connector | 3pcs | |
| C | Outlet Box Screw | 2pcs | |
| D | Mounting Screw | ||
| (Pre-assembled to fixture) | 2pcs | ||
| E | Ceiling Canopy | 1pc | N/A |
| F | Socket Assembly | 1pc | |
| G | Ring Assembly A | 2pcs | |
| H | Ring Assembly B | 2pcs |
CARE AND MAINTENANCE
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulbs will not light. | 1. Bulb is burned out. |
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.| 1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Fuse blows or the circuit breaker trips
when light is turned on.| Crossed wires or power wire is grounding out.| Check
wire connection.
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>