QUOIZEL LWS6412B1 Ellerbrooke 5 Light Brushed Nickel Pendant Light User Guide
- June 17, 2024
- QUOIZEL
Table of Contents
QUOIZEL LWS6412B1 Ellerbrooke 5 Light Brushed Nickel Pendant Light
Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service
department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00
p.m., EST, Friday. For the quickest response, please visit Quoizel.com and
click on Contact Us. 1-844-564-3055
E-mail:cs@quoizel.com
SAFETY INFORMATION
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read the instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off the electricity to the fixture before replacing the bulb(s).
PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product
LIGHT SOURCE
5 BULBS REQUIRED (SOLD SEPARATELY)
Please check with the bulb manufacturer for dimming capabilities
TOOLS REQUIRED
PACKAGE CONTENTS
PART| DESCRIPTION| QUANTITY
| Stock Part#
---|---|---|---
A
| Crossbar Assembly
| 1pc| ****
916269KIT
B
| Wire Connector| 3pcs
C
| Outlet Box Screw
| ****
2pcs
D
| Quick Link
| ****
2pcs
E
| Ceiling Canopy
| ****
1pc
F
| Fixture Chain| ****
1pc
| ****
M382CHBN
G
| Fixture Loop| ****
1pc
| ****
N/A
H
| Socket Assembly
| ****
1pc
I
| Ring A| ****
2pcs
J
| Ring B| ****
2pcs
INSTALLATION
If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly. Adjust the length of the pre-assembled nipple by unscrewing the pre-assembled hex nut. Screw the nipple in or out of the crossbar until the correct length is achieved. Then, re-attach the ceiling canopy.
- Pull the supply wires and ground wire up through the fixture chain alternating links.
- Push the ends of the supply wires and ground wire up through the loop and into the outlet box.
- Remove the canopy.
- Insert the remaining slack wire into the outlet box.
Trim excess fixture wire leaving a minimum of 6 inches hanging out of the outlet box. Separate the smooth side and ribbed side of the supply wire. Using wire strippers, strip each wire 1/2 inch from the end.
CARE AND MAINTENANCE
Wipe clean using a soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM
| POSSIBLE CAUSE
| CORRECTIVE ACTION|
---|---|---|---
The lights will not turn on.
.
| 1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
| 1. Replace light bulb.
2. Make sure the power supply is on.
3. Check wiring.
4. Test or replace the switch.
|
The fuse blows or the circuit breaker trips when the light is turned on.
|
Crossed wires or power wire is grounded out.
|
Check the wire connection.
|
MADE IN CHINA
Documents / Resources
|
QUOIZEL LWS6412B1 Ellerbrooke 5 Light Brushed Nickel Pendant
Light
[pdf] User Guide
LWS6412B1 Ellerbrooke 5 Light Brushed Nickel Pendant Light, LWS6412B1,
Ellerbrooke 5 Light Brushed Nickel Pendant Light, Light Brushed Nickel Pendant
Light, Brushed Nickel Pendant Light, Nickel Pendant Light, Pendant Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>