CALIMET CM9-M5 Keychain Remote Control Instruction Manual

: June 17, 2024
: CALIMET

Table of Contents

CALIMET CM9-M5 Keychain Remote Control
Product Information
Product Usage Instructions
Swing Gate Operators

CALIMET CM9-M5 Keychain Remote Control

Product Information

OVERVIEW

CALIMET-CM9-M5-Keychain-Remote-Control-FIG-1

Specifications

Sliding Gate Operators: M3 Series, M5 Series, M6 Series, CM7 Series
Swing Gate Operators: M9.2 Series
Max Gate Length: 18 feet
Max Gate Weight: 1,000 lbs (M3 Series), 2,500 lbs (M5 Series), 1,600 lbs (M6 Series)
Power Input: 110V – 120V AC, 15 AMP (M3 Series), 110V – 120V AC, 30 AMP (M5 Series), 110V – 120V AC, 7 AMP (M6 Series)
Operating Volt: 24V DC
Operating Temp: N/A (M3 Series), 250W Continuous Duty (M5 Series), 370W Continuous Duty (M6 Series)
Motor Gear Reducer: Gear #60 + #40 (M3 Series), Gear #70 + #40 (M5 Series)
Gate Speed: N/A (M3 Series), Foot Pedal (M5 Series), Foot Pedal (M6 Series)
Manual Release: Key (M3 Series), Swivel Arm (CM9-907 Included) (M5 Series), Swivel Arm (CM9-907 Included) or Linear Arm (M6 Series)
PhotoCell Sensor: 30 feet (Included) (M3 Series), 50 feet (Included) (M5 Series), 30 feet (Included) (M6 Series)
Edge Sensor: Wireless (Add-On Optional) (M3 Series), Wireless (Add-On Optional) (M5 Series), Wireless (Add-On Optional) (M6 Series)
Mobile App: SmartGate (CM Camera Req.)
Backup: B8A0T0TELRBSY
Solar Ready: Yes
Warranty: Commercial – 3 Years, Residential – 5 Years

Product Usage Instructions

Sliding Gate Operators

The CM sliding gate operators are available in the following series:

M3 Series
M5 Series
M6 Series
CM7 Series

Swing Gate Operators

The CM swing gate operators are available in the M9.2 Series.

M3 Series

The M3 Series sliding gate operator is suitable for gates with a maximum length of 18 feet and a maximum weight of 1,000 lbs. It operates on a power input of 110V – 120V AC, 15 AMP. The motor gear reducer is Gear #60 + #40. The gate speed is not applicable for this series. The manual release is done using a key. The operator includes a wireless photoCell sensor with a range of 30 feet. It is solar ready and comes with a commercial warranty of 3 years and a residential warranty of 5 years.

M5 Series

The M5 Series sliding gate operator is suitable for gates with a maximum length of 25 feet and a maximum weight of 2,500 lbs. It operates on a power input of 110V – 120V AC, 30 AMP. The motor gear reducer is Gear #70 + #40. The gate speed is controlled using a foot pedal. The manual release is done using a swivel arm (CM9-907 included). The operator includes a wireless photoCell sensor with a range of 50 feet. It is solar ready and comes with a commercial warranty of 3 years and a residential warranty of 5 years.

M6 Series

The M6 Series sliding gate operator is suitable for gates with a maximum length of 18 feet and a maximum weight of 1,600 lbs. It operates on a power input of 110V – 120V AC, 7 AMP. The motor gear reducer is not applicable for this series. The gate speed is controlled using a foot pedal. The manual release is done using either a swivel arm (CM9-907 included) or a linear arm. The operator includes a wireless photoCell sensor with a range of 30 feet. It is solar ready and comes with a commercial warranty of 3 years and a residential warranty of 5 years.