CALIMET CM9-631 Fire Access Box Instruction Manual
- June 12, 2024
- CALIMET
Table of Contents
CM9-631 Fire Access Box
Instruction Manual Fire Access Box Instruction Manual
CM9-631
CM9-631 Fire Access Box
Fire department access box ready for a padlock (not supplied). Your fire
department will access this box which when opened, will cause the gate
operator to open the gate. Contact your local fire department for instructions
on which padlock to use. Most fire departments use knoxbox, but some may use
different suppliers.
www.knoxbox.com/Products/Commercial-
KnoxBoxes
Calimet Gate Operators
Use 14-20 gauge awg wire (not included) and splice (join) with the white and
black wires.
Insert wires into green terminal normally located on the bottom right of the
circuit board. White wire 24V-COM Black wire EXIT LOOP
Other Brand Gate Operators
Use 14-20 gauge awg wire (not included) and splice (join) with the white and
black wires.
White wire → 24V Common
Black wire → Normal Open Relay
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>