AUKEY LT-ST23 Mini RGB Light User Manual
- June 17, 2024
- Aukey
Table of Contents
AUKEY LT-ST23 Mini RGB Light
Thank you for purchasing the AUKEY LT-ST23 Mini RGB Light. Please read this user manual carefully and keep it for future reference.
Package Contents
- Mini RGB Light
- Micro-USB Cable
- Two Circular Metal Plates
- Carabiner
- User Manual
- Warranty Card
Specifications
| Model | LT-ST23 |
|---|---|
| Luminous Flux | 180 lumens (Max) |
| Color Temperature | 2700K / 6500K |
| Color Rendering Index | ≥ 80Ra |
| Input | DC 5V 1A |
| Power Consumption | 2W |
| Charging Time | 3.5 hours |
| Continuous Use Time | 6 hours (brightest light), 100 hours (dimmest light) |
| Battery Capacity | 2200mAh |
| LED Type | SMD2835 |
| Numbers of LEDs | 29 |
| Water-Resistance Rating | IP65 |
| Dimensions (LxDxH) | 95 x 95 x 75mm / 3.74” x 3.74” x 2.95” |
| Weight | 259g / 9.12oz |
Product Diagram
Getting Started
Connect one end of the included micro-USB cable to the charging input port of the LT-ST23 and the other end of the cable to a USB charger or charging port to charge. LED indicator will be flashing red while charging and blue when fully charged. Charging takes around 3.5 hours.
Powering On/Off the Light
- Long-press the multi-function button to turn on/off the light
- When the light is switched on, the LED indicator is blue (or flashes red when battery is below 20%)
- With the light on, double-tapping the touch control point (center-top of the light cover) also switches the light on/off, but off is standby with touch control active. Only the multi-function button switches the light fully off
Switching Between Light Modes
There are four main light modes: cool white, soft yellow, manual RGB color-
cycling, and automatic RGB color-cycling.
- Switch between light modes by pressing the multi-function button
Adjusting Light Brightness
- Long-press the touch control point until you get the desired brightness. On each long press, the brightness will smoothly scale in the opposite direction
- Stop at any brightness level between the highest and lowest (LED indicator will flash green when these are reached)
- Brightness is only adjustable in cool white and soft yellow light modes
Using the Light Color Modes
There are two RGB color-cycling light modes. The first is manual and the
second is automatic. Use manual to choose a color. Automatic cycles through
all the colors continuously.
- In the manual, long-press the touch control point until you get the desired color
Light Memory Function
The light switches on with the last-set mode, so you don’t need to repeat
color selection or brightness adjustment to reach your preferred setting.
Using the Magnetic Light Mounts
The light directly attaches to many metal surfaces. For convenient mounting on
other surfaces, two metal plates are included.
- Clean the flat surface (such as a wall) where you want to install the light with a mixture of equal parts (1:1) isopropyl alcohol and water
- Carefully remove the metal plate’s adhesive backing and adhere the plate to the surface
- Press and hold firmly for a few minutes to ensure tight adhesion
- Place the light’s magnetic base against the magnetic plate so that it magnetically attaches
Product Care & Use
- Don’t repair, dismantle, or modify the product
- Keep away from extreme heat
- When using the hanging strap, ensure secure fixing to avoid the light falling
- Disconnect the power cable and switch off the light before cleaning or when not in use for a long time
- Clean the light only with a soft, dry cloth
- Charge the LT-ST23 at least once every 3 months
- jp.aukey.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>