Imilab CMSXJ68A EC6 Dual Outdoor Security Camera User Manual
- June 17, 2024
- IMILAB
Table of Contents
IMILAB EC6 Dual
Outdoor Security Camera
User Manual
Please read this manual carefully before using the device and retain it for future reference.
Product Introduction
- Package list
- Product Appearance
Installing the Device
The device can be wall mounted, ceiling mounted or tied around a support.
• Wall mounting
- Attach the wall mounting positioning sticker on the desired installation location on 4 wall. Drill two holes at the positions indicated on the sticker. Drilling diameter of around 6.0 mm; drilling depth of around 30mm.
- Insert two plastic expansion nuts into the wall. Put the baswall. Secure the base plate by inserting the screws into the exnuts.
Note: After installatin, the pr afuct must be in ha iz mtal han (as shan in the image belay).
• Ceiling mounting
-
Attach the ceiling mounting positioning sticker on the desired installation location on the ceiling. Drill two holes at the positions indicated on the sticker. Drilling diameter of around 6.0 mm; drilling depth of around 30mm.
-
Insert two plastic expansion nuts into the wall. Put the base plate on the ceiling. Secure the base plate by inserting the screws into the expansion nuts.
Note: After installatim, the pr duct mut be in ha iz mtalhan ging Pp Gitim (as shaa in the image belay.
• Pole mounting
Note: After installatim, the p r duct mut be in ha iz mtalhan ging p Gitim (as
sham in the image bela.
Connecting the Device
-
Turn on the camera
Insert the power supply cable into the camera’s power supply port.
Connect the other end of the power supply cable to a power source. -
Insert a micro SD card
Ensure that the camera is disconnected from the power supply. Remove the waterproof cap and expose the microSD card slot. Insert the microSD card into the card slot in the direction illustrated.
Note: When inserting or removing the microSD card, please disconnect the camera from the power supply. Please use a microSD card froma reputable manufacturer. The recommended read and write speed of the micro SD card is at least U1/Class 10.
- Restoring factory settings
Press and hold the reset button with fine needle, then you can hear the “reset succeed” voice. Data stored on the microSD card is not deleted.
Note: make sue the vater pr af cwer is cwered after inser ting the micr @D carda resetting the device.
Connecting Network Video Recorder (NVR)
This product supports the onvif protocol and can be connected to mainstream brands of onvif compatible network video recorders.
- Network Video Recorder Connection
The camera can be connected as illustrated and operated by logging in to the web interface using Internet Explorer and setting a password on the same LAN.
- Login to the web interface
Note: Make sure your computer and device are on the same LAN and in the
same network segment. In case you cannot enter the web interface of the device
or forgot your password, etc., please restore the device to factory settings
and then operate it again.
Step 1: Open the IE browser, enter the IP address and suffix of the device in
the address bar, e.g. 192.168.X.X:54333, and press [ENTER] key.
Step 2: Set the password and click Login.
Connecting to Mi Home App
This product works with Mi Home and can be controlled using the Mi Home app.Scan the QR code to download and install the Mi Home app. If you already have Mi Home app installed, you will be directed to the device connection page. You can also search for “Mi Home” in an app store to download and install the Mi Home app. Open the MiHome app. Tap “+’ atthe top right corner and following the on-screen instructions to add the device.
Note: Actual operation may differ due to Mi Home app update. Please
follow the on-screen instructions of the Mi Home app
. About works with mijia
“works with mij ia” signifies that the product herein is designedo connect and
interact with Mi Home app or Mi Al. Please be noted that the product herein is
certified by the app interaction only. Xiaomi and Mij ia are not responsible
for any of the product manufacturing, safet y and regulatory standards, or
qality supervision.
Specifications
Name: IMILAB EC6 Dual Outdoor Security Camera
Model: CMSXJ68A
Net Weight: 593 g
Resolution: 6MP (2x3MP)
Input: 12V=1A
Item Dimensions: 178 x 107x 165 mm
Operating Temperature: -30°C~ 60°C
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n/ax 2.4GHz
Freqiency Range: 2400-2483.5 MHZ
EU Max Output Power: s20 dbm
FCC ID:2APA9-CMSXJ68A
Precautions
- The working temperature of the device is -30°C to 60°C. Do not use the the device when the temperature is too high or too low.
- For better results, avoid placing the camera in front of or next toa glass surface, a white-colored wall or other reflective surfaces as this may cause the recording to have un-even lighting between the foreground and background or be over-exposed.
- Please ensure that the device is within Wi-Fi signal coverage. Place it at a location with good Wi-Fi signal strength.
- Try to avoid placing the device near a metallicobj ect, a migwave oven or other obj ects that may cause signal interference.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the eqiipment. This
device complies with Part 15 of the FCC Rules.
Operation is subj ect to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Note: This eqiipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. Thise qipment generates, uses, and
canradiate radio freqiency energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur ina particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the eqiipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the eqiipment and receiver.
- Connect the eqipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC 20cm Statement:
This eqipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This eqipment should be installed and operated with
a minimum dista nce of 20cm between the radiator &your body. This transmier
must not be co-located or operating in conj unction with any other antennab
transmier.
WEEE Disposal and Recycling Information
Correct Disposal of this product. This marking indicates that product should
not be disposal with other household wastes through out the EU. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take
this product for environment safe
recycling.
Adaptor Statements
Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio eqiipment
type IMILAB EC6 Dual Outdoor Security Camera is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: https://www.imilabglobal.com/pages/eu-
declartion-of-conformity
Manufacturer: Shanghai Imilab Technology Co., Ltd.
Address: Room 001A, Floor 11, Block 1, No. 588 Zixing Road,
Minhang District, Shanghai, China
For further information, please go to
www.imilabglobal.com.
Support: help@imilab.com
Warranty:
https://www.imilabglobal.com/pages/warranty
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>