imilab EC5 Floodlight Camera User Manual
- June 5, 2024
- IMILAB
Table of Contents
- Product Introduction
- Installing the Device
- Connecting the Device
- Connecting to Mi Home App
- About works with mijia
- Specifications
- Full Color Night Vision
- Video Playback
- Sharing a Video
- Home Security
- FCC Statement
- Adaptor Statements
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MILAN EC5
Floodlight Camera
User Manual
Please read this manual carefully before using the device and retain it for future reference.
Product Introduction
Package list
Product Appearance
Installing the Device
The device can be wall-mounted, ceiling-mounted, or tied around support.
Wall mounting
- Attach the wall mounting positioning sticker to the desired installation location on a wall. Drill two holes at the positions indicated on the sticker. Drilling diameter of around 6.0 mm; drilling depth of around 30mm.
- Insert two plastic expansion nuts into the wall. Put the base plate on the wall. Secure the base plate by inserting the screws into the expansion nuts.
Ceiling mounting
- Attach the ceiling mounting positioning sticker on the desired installation location on the ceiling. Drill two holes at the positions indicated on the sticker. Drilling diameter of around 6.0 mm; drilling depth of around 30mm.
- Insert two plastic expansion nuts into the wall. Put the base plate on the ceiling. Secure the base plate by inserting the screws into the expansion nuts.
Pole mounting
Connecting the Device
-
Turn on the camera
Insert the power supply cable into the camera’s power supply port.
Connect the other end of the power supply cable to a power source. -
Insert a micro SD card.
Ensure that the camera is disconnected from the power supply. Use a screwdriver to remove the protective case and expose the micro SD card slot.
The contact points of the micro SD card should be facing down. Insert the micro SD card into the slot.
Note:
When inserting or removing the micro SD card, please disconnect the camera
from the power supply. Please use a micro SD card from a reputable
manufacturer (up to 256GB). The recommended read and write speed of the micro
SD card is at least U1/Class 10.
Restoring factory settings
Press and hold the reset button to restore the factory settings. The content
inside the micro SD card will not be deleted.
Connecting to Mi Home App
This product works with Mi Home and can be controlled using the Mi Home app.
Scan the QR code to download and install the Mi Home app. If you already have
Mi Home app installed, you will be directed to the device connection page. You
can also search for “Mi Home” in an app store to download and install the Mi
Home app. Open the Mi Home app. Tap “+” at the top right corner and follow the
on-screen instructions to add the device. an app store to download and install
the Mi Home app. Open the Mi Home app. Tap “+” at the top right corner and
follow the on-screen instructions to add the device..
https://home.mi.com/do/home.html?f=xz&p=73620
Note: Actual operation may differ due to Mi Home app update. Please follow the on-screen instructions of the Mi Home app.
About works with mijia
“works with mijia” signifies that the product herein is designed to connect and interact with Mi Home app or Mi AI. Please be noted that the product herein is certified by the app interaction only. Xiaomi and Mijia are not responsible for any of the product manufacturing, safety and regulatory standards, or quality supervision. About works with mijia
Specifications
Name: MILAB EC5 Floodlight Camera
Model: CMSXJ55A
Input:12V 1A
Resolution:2304 x 1296
Operating Temperature:-30℃ ~ 60℃
Wireless Connectivity:Wi-Fi IEEE 802.11 b/g/n 2.4GHz
Item Dimensions:139 x 128 x 135 mm
Net Weight:618 g
Viewing Angle:95°
Aperture: F2.1
Video Codec: H.265
IP rating: IP66
Full Color Night Vision
The light sensor can automatically switch the device to night vision mode
through IR-CUT based on changes in the lighting of the environment.
Built-in high-power exposure light can present colorful images even in the
darkness.
Video Playback
Past videos can only be viewed when a compatible micro SD card is inserted
into the MILAB EC5 Floodlight Camera. After inserting a micro SD card and
turning on the device, the camera will automatically start recording.
In the control interface for MILAB EC5 Floodlight Camera in the Mi Home app,
tap the playback button to enter the video playback page. You can also view a
recording by selecting a time period.
Sharing a Video
In the control interface for MILAB EC5 Floodlight Camera in the Mi Home app, you can set the device as a shared device in the settings menu and invite others to watch the recordings. Users must download the Mi Home app and log in to their Xiaomi account in order to view the recordings of the shared device.
Note:
The illustrations are for reference only. The pages may differ based on the
actual Mi Home app version and mobile phone operating system.
Home Security
The Home Security function can be turned on/off in the control interface for
MILAB EC5 Floodlight Camera in the Mi Home app.
The device can detect and record movements within the viewing angle and push
the recording to the client. Users can set the surveillance time, alert
sensitivity, alert interval, etc.
Note:
The illustrations are for reference only. The pages may differ based on actual
Mi Home app version and mobile phone operating system.
Precautions
- The working temperature of the device is -30℃ to 60℃. Do not use the device when the temperature is too high or too low.
- For better results, avoid placing the camera in front of or next to a glass surface, a white-colored wall or other reflective surfaces as this may cause the recording to have un- even lighting between the foreground and background or be over-exposed.
- Please ensure that the device is within Wi-Fi signal coverage.
- Place it at a location with good Wi-Fi signal strength.
- Try to avoid placing the device near a metallic object, a microwave oven, or other objects that may cause signal interference.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC 20cm Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmit er must not be co-located or operating in conjunction with any other antenna or transmitter.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment
by handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as the terms and conditions of such collection points.
Adaptor Statements
Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment
type MILAB EC5 Floodlight Camera is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.imilabglobal.com/pages/eu-
declaration-of-conformity
Manufacturer: Shanghai Imilab Technology Co., Ltd.
Address: Room 001A, Floor 11, Block 1, No. 588 Zixing
Road, Minhang District, Shanghai, China
For further information, please go to
www.imilab.com.
Support: help@imilab.com
www.imilabhelp.com
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk
- 创米imilab官网-智能门-智能家居品牌-全屋智能品牌-扫地机器人
- IMIKI
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>