StarTech ST7200USBM Industrial USB Hub Instruction Manual
- June 17, 2024
- StarTech
Table of Contents
StarTech ST7200USBM Industrial USB Hub
Mountable Rugged Industrial 7 Port USB Hub
ST7200USBM
Parts Description
- USB type B connector (Host)
- USB hub connectors
- 2-Wire Power Terminal Block
- Power LED
*actual product may vary from photos
Packaging Contents
- ST7200USBM USB hub
- USB-B with screw lock to USB-A cable
- Installation Guide
- DIN Rail Mounting Kit
System Requirements
- USB-enabled computer system with available port
- USB-compliant operating system
Installation
Connect the USB type B cable from the USB hub to an available USB port on the host computer system. No driver installation is required, as a USB-compliant operating system will automatically install it.
OPTIONAL: Power will be provided by the USB port on the host computer system, if additional power is required, an external power source can be connected to the USB hub via the 2-wire terminal block.
Specifications
- Bus Interface: USB 2.0
- Connectors
- 7 x USB type A female
- 1 x USB type B female
- 1 x 2-wire power terminal block
- LEDs: 1 x Power
- Maximum Data Transfer Rate: USB 2.0: 480Mbps
- Surge Protection: 350W per port
- Operating Temperature: 0°C to 55°C (32°F to 131°F)
- Storage Temperature: -20°C to 85°C (-4°F to 185°F)
- Humidity: 5 ~ 95% RH
- Dimensions: 133.0mm x 61.5mm x 36.3mm
- Weight: 500g
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may refer to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgment elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to providing industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a one-year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees, or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 04/25/2017
Frequently Asked Questions
What is the StarTech ST7200USBM Industrial USB Hub?
The StarTech ST7200USBM is a rugged, mountable 7-port USB hub designed for industrial use. It provides additional USB ports for connecting devices to a computer system.
What type of USB interface does the StarTech ST7200USBM use?
The StarTech ST7200USBM uses the USB 2.0 interface, offering a maximum data transfer rate of 480Mbps.
How many USB ports does the StarTech ST7200USBM have?
The StarTech ST7200USBM has 7 USB type A female ports for connecting devices and 1 USB type B female port for connecting to the host computer.
Does the StarTech ST7200USBM require external power, or can it be powered through USB alone?
While the StarTech ST7200USBM can be powered through the USB port on the host computer system, it also has a 2-wire power terminal block for optional external power if additional power is needed.
Is driver installation required for the StarTech ST7200USBM USB Hub?
No, driver installation is not required for the StarTech ST7200USBM. It is plug-and-play compatible with USB-compliant operating systems, and the operating system will automatically install it.
What are the dimensions and weight of the StarTech ST7200USBM Industrial USB Hub?
The dimensions of the StarTech ST7200USBM are approximately 133.0mm x 61.5mm x 36.3mm, and it weighs approximately 500g.
Is the StarTech ST7200USBM Industrial USB Hub surge-protected?
Yes, the StarTech ST7200USBM offers surge protection of 350W per port to safeguard connected devices.
What is the operating temperature range for the StarTech ST7200USBM USB Hub?
The StarTech ST7200USBM operates in temperatures ranging from 0°C to 55°C (32°F to 131°F).
Can the StarTech ST7200USBM be mounted on a DIN rail?
Yes, the StarTech ST7200USBM includes a DIN rail mounting kit for easy installation in industrial settings.
Does StarTech provide technical support for the StarTech ST7200USBM Industrial USB Hub?
Yes, StarTech offers lifetime technical support for their products. You can visit their support website for assistance.
What is the warranty for the StarTech ST7200USBM Industrial USB Hub?
The StarTech ST7200USBM is backed by a one-year warranty from StarTech.
What should I do if I encounter interference issues with the StarTech ST7200USBM USB Hub?
If interference issues occur with the StarTech ST7200USBM, you can try reorienting the receiving antenna, increasing the separation between devices, or consulting a professional technician for assistance.
Reference:StarTech ST7200USBM Industrial USB Hub Instruction Manual- device. report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>