inateck KB09118 Bluetooth Keyboard User Manual

inateck KB09118 Bluetooth Keyboard

Product Information

Specifications

• Compliance: Part 15 of the FCC Rules
• RF Exposure : Meets general RF exposure requirement
• Usage : Portable exposure condition without restriction

Product Usage Instructions

Interference Handling
If interference occurs in your installation, please follow these measures to correct it:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure
The device has been evaluated to meet general RF exposure requirements. This means that the device can be used in portable exposure conditions without any restrictions.

FAQ (Frequently Asked Questions)

1. Q: What should I do if there is interference with radio or television reception?
   A: If you experience interference, try the following measures:

   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and receiver.
   • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help.

2. Q: Does the device comply with FCC regulations?
   A: Yes, this device complies with Part 15 of the FCC Rules.

3. Q: Can I use the device in portable exposure conditions?
   A: Yes, the device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without any restrictions.

Product Diagram

1. Power ON/OFF
   • Power ON : Long press the power button, and indicator2 flashes blue.
   • Power OFF : Long press the power button, and the indicator and backlight will be off.
2. Bluetooth Pairing
3. Step 1 : For the first use, turn on KB09118 and then the keyboard will automatically enter pairing mode. You can also long press simultaneously for 3 seconds to enter  pairing mode. In pairing mode, indicator 2 flashes blue.
4. Step 2 : On your iPad, go to Settings> Bluetooth, turn on Bluetooth and then “lnateck KB09118” will show up in “other Devices”.
5. Step 3 : Tap “lnateck KB09118” to pair it with your iPad. The indicator 2 will stay on in seconds, which means that Bluetooth pairing is completed.

Note:

1. Set Up Your iPad:

2. For better user experience, please follow steps below to set up your iPad at first use once Bluetooth pairing is completed.

3. Go to Settings> General> Trackpad and drag the slider to the middle of the tracking speed.

4. Go to Settings> General> Trackpad and turn on “Tap to Click” and “Two Finger Secondary Click”. Go to Settings> Accessibility> Touch and turn off Assistive louch.

5. Go to Settings> General> Gestures and enable the toggle for the “Four and Five Finger Swipe” setting.
   Optional Settings

6. Steps to stop Caps Lock changing your keyboard language:

7. Go to Settings> General> Keyboard > Hardware Keyboard and turn off Switch Languages using Caps Lock.

8. Steps to disable the double tap period shortcut:

9. Go to Settings> General> Keyboard> Hardware Keyboard and click the switch to turn on “.” Shortcut.

10. Fix Bluetooth Pairing Problems:

11. Step 1: Go to Settings> Bluetooth, find “lnateck KB09118” in My Devices and tap the info
    button next to it, then tap “Forget This Device”. If there are multiple pairing records related to the keyboard, please clear all of them.

12. Step 2 : Hold simultaneously for3 seconds and then the two indicators will blink for 3 times once tutor reset is completed. Then, the keyboard will enter Bluetooth pairing mode
    and indicator2 flashes blue.

13. Step 3 : Pair your lnateck KB09118 with your iPad.

14. Multi-Touch Gestures

15. Adjust the Keyboard Backlight

16. Hold simultaneously to adjust the backlight color. 7 colors are available in total.

17. Hold simultaneously to adjust the backlight brightness. 3 levels are at your choice.

18. Shortcut Keys

19. Common Keyboard Shortcuts

20. LED Indicator

Note:

1. If operations such as Bluetooth pairing are performed when the keyboard is charging, the [ indicator 2 will show a mixed light effect consisting of a solid red/green light and a flashing blue
2. If operations such as Bluetooth pairing are performed when the battery is low, indicator 2 will  In show the a above mixed light situation, effect please consisting pay of attention a flashing to the red color light and prompts a of flashing the blue indicator light. light.

Restore Factory Defaults

Hold simultaneously for 3 seconds and then the two indicators will blink for 3 times once the factory reset is completed.Then, the keyboard will enter Bluetooth pairing mode and indicator 2 flashes blue.

Check Battery Level

You can check the battery level of the keyboard through the battery widget on the iPad ‘s Today View. You can also add the battery widget to the Home Screen to view the battery level of the keyboard.

Note :  There will be a deviation of about 5% between the battery level displayed by the iPad battery widget and the actual battery level. Please refer to the indicator light for the following situations:

1. When the keyboard is charging, please judge whether it is fully charged according to the color of indicator 2, red or green.
2. When the battery is low, please refer to the red flashing condition of indicator 2.

 Charging

When the battery level is under 20%, the indicator 2 will blink in red. Please recharge the keyboard in time. The recommended charging voltage is 5V. The keyboard will be fully charged in 2~3 hours. The indicator 2 will stay in red when the keyboard is charging and turn green when it’s fully charged.

Sleep Mode

1. When KB09118 is left idle for 1 minutes, the backlight will turn off.
2. When KB09118 is left idle for 10 minutes, it will enter sleep mode and the Bluetooth connection will be disrupted. The connection can be rebuilt with a press of any key.
   ( Note: Tapping the trackpad cannot wake up the keyboard.

Product Specification

Packing List

• KB09118 * 1
• Charging Cable * 1
• Instruction Manual *1

FCC Warning Statement

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  •  Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>