hansgrohe 17235XXX Axor Carlton Range Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
hansgrohe 17235XXX Axor Carlton Range
Product Information
The product is a shower system with the following specifications:
- Operating pressure: maximum 1 MPa
- Recommended operating pressure: 1.6 MPa
- Hot water temperature: Recommended
- Hot water temperature: Recommended
- The shower system may only be used for bathing, hygienic, and body cleansing purposes.
- The hot and cold supplies must be of equal pressure.
- Hansgrohe mixers can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0.15 MPa.
Product Usage Instructions
Follow these instructions to use the shower system:
- Ensure that the hot and cold water supplies have equal pressures.
- Wear protective gloves during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic, and body cleansing purposes.
- Do not use silicone-containing acetic acid!
- Clean the shower system as per the enclosed brochure.
- To operate the shower system, refer to page 38 of the user manual.
Assembly Instructions
To assemble the shower system, follow the instructions on page 31 of the user
manual.
Models
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Symbol Description
- Do not use silicone-containing acetic acid!
Assembly
Dimensions
Flow diagram
- with EcoSmart
- without EcoSmart
Carlton
17125XXX/17135XXX
Carlton
17235XXX
Carlton
17235XXX
Spare parts
- XXX = Colors
- 000 = chrome plated
- 090 = chrome plated/gold plated
Special accessories
- special tool (58085000) order as an extra
- Installation kit order as an extra
Operation
open
close
hot
cold
Cleaning
The QuickClean cleaning function only needs a small manual rub over to remove the limescale from the spray channels
Test certificate
Hansgrohe
Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax
+49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com.