SYNCO G1A1 Pro Wireless Lavalier Microphone User Manual

SYNCO G1A1 Pro Wireless Lavalier Microphone User Manual

Caring For Your SYNCO Product

• Please keep the product in a dry, clean, dust-free environment.
• Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
• Use only a soft and dry cloth for cleaning the product.
• Malfunction may be caused by dropping, impact of external force.
• Do not attempt to disassemble the product. Doing so voids warranty.
• Please have the product checked or repaired by authorized technicians if any malfunctions happened.
• Failure to follow all the instructions may result in mechanics damage.
• Warranty does not apply to human errors.

Package List

Product Instruction

TX Transmitter

1. External Mic Input
2. Type-C Charging Port
3. On/ Off Button
4. Built-in Mic
5. Power Indicator
6. Paring Indicator
7. Noise Reduction
8. Gain Adjustment of TX
9. Magnet Pocket Clip
10. Contacts

RX Receiver

1. Type-C Charging Port / DigitalOutput
2. On/ Off Button (Mono / Stereo /Protected Channel)
3. 3.5mm TRS Output
4. 3.5mm Monitoring Port
5. Power Indicator
6. Paring Indicator
7. Gain Adjustment of TX A
8. Gain Adjustment of TX B
9. Magnet Pocket Clip
10. Contacts

1. Contacts
2. Power Indicator
3. Type-C Port

Indicator – TX

Indicator – RX

Operations

1. Power On/ Off
   Power On
   Method 1 : The TX and RX automatically turn on after taken out from the charging Case.
   Method 2 : The TX and RX automatically turn on when long press the power button for 3 seconds, and the blue status indicator light up.
   Power Off
   Method 1 : After put the transmitter/receiver into the charging case, the green indicator light keeps on for automatic charging. After being fully charged, the green indicator light will turn off and automatically shut down.

Method 2 : The TX and RX automatically turn off when long press the power button for 3 seconds, and the red status indicator light off.

2. Pairing
   Automatic Pairing
   Automatically pairing after the TX/RX turns on when taken out from the charging case.
   
   Manual Pairing
   (1) Long press the power button for 8 seconds while the TX is powered off until the blue pairing indicator flashes.
   (2) Long press the power button for 8 seconds while the RX is powered off until the blue /red/ green pairing indicators flashes.
   (3) The blue light keeps on when the TX successfully paired. ( And the red, green and blue pairing indicators on the RX flash for about 1 minute , and the blue light keeps on when exit the pairing state).
   
   

3. Connection
   The receiver outputs the audio signal to the recording device via either a 3.5mm TRRS Phone Cable or a 3.5mm TRS camera cable. Use the appropriate cable according to your device.
   (Note: When using an external microphone, please insert it correctly into the microphone input port.)

4. Volume Control
   ① Press the power button on the TX to turn on/off the mute. When mute is on, the red pairing indicator on the TX keeps on.
   ② Short press the gain adjustment button of the TX to adjust the volume for 4 levels.
   ③ Short press the gain adjustment of A/B TX buttons on the RX to adjust the volume of A/B TX.

5. Noise Reduction
   Short press the noise reduction button on the TX to turn on/off the noise reduction function. When the noise reduction on, the red and blue indicator light on the TX status light up at the same time.

6. Switch the Channel Mode
   Short press the power button on the RX to switch the mono/stereo/ protected channel mode.
   Default mono mode. When switching to stereo mode, the red pairing indicator light keeps on. When switching the protection channel mode, the blue & red paring indicator lights light on at the same time.
   
   

7. Charging
   ① Connect the charging cable through the Type-C port to charge the charging case, and fully charged about 3.5 hours.
   ② The TX/RX: Automatically charge through the contact point of the charging case after put into the charging case.
   ③ Connect the charging cable through the Type-C port of the receiver and the transmitter, and fully charged in about 2 hours.
   

Specifications

Warranty

Warranty Period

Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
2. Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user.
   Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

• Faults resulted from inappropriate use of a product without following its operation specification
• Artificial damage, e.g. crash, squeeze, scratch, or soaking
• Modifications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration
• The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off
• All consumable accessory attached to a product, like cable, wind muff, battery
• Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

• If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO’s customer service through email at support@syncoaudio.com.
• Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.
• If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.

WARRANTY CERTIFICATE

Please register your warranty. Meanwhile, you are welcomed to contact us
via Email：support@syncoaudio.com

Guangzhou Zhiying Technology Co., Ltd

Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue, Liwan District, Guangzhou, China, 510000

support@syncoaudio.com

 www.syncoaudio.com

www.facebook.com/syncomicrophones

References

• SYNCO | Branded Microphone Manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>