AIRZONE AZCE8CB1MOT 3.0 Main Control Board Instruction Manual

AIRZONE AZCE8CB1MOT 3.0 Main Control Board

Product Information

Specifications:

• Power: Externally powered at 110 / 230 Vac
• Stand-by Consumption: 2.10 W (110 Vac), 3.12 W (230 Vac)
• Current: 250 mA
• Communication Protocol: Airzone
• Frequency: 868.12 MHz (EU), 915.2 MHz (EEUU, Canada, Australia, Nueva Zelanda)
• Transmission Power: 0 dBm
• Max Distance: 40 m
• Storage Weight: 554 g
• Bluetooth Protocol: Bluetooth v5.0 and BLE specification
• Bluetooth Class: Class-1, class-2 and class-3 transmitter

Product Usage Instructions

Mounting:

To mount the Airzone Flexa 3.0 system, follow the assembly instructions below:

1. Identify the mounting location on the wall where you want to install the main control board.
2. Use appropriate screws and wall anchors to securely mount the board on the wall.
3. Ensure that the board is mounted at a suitable height and in a convenient location for easy access.

Wiring:

Proper wiring is essential for the functioning of the Airzone Flexa 3.0 system. Follow the wiring instructions below:

1. Connect the power supply to the main control board using a 110/230 Vac power source.
2. Connect the shielded twisted pair cables (AZ1, AZ2, AZ3, IU, CAN) to their respective terminals on the board.
3. Connect the necessary cables for ON/OFF module, AI1, DI1, O1, O2, and M1…M8 to their respective terminals.
4. Ensure all connections are secure and properly insulated.

Configuration:

To configure the Airzone Flexa 3.0 system, follow the steps below:

1. Refer to the user manual or visit myzone.airzone.es for detailed configuration instructions.
2. Follow the provided guidelines to set up and customize the system according to your preferences.
3. Ensure that all settings are saved and applied for proper system functionality.

Frequently Asked Questions

Q: Where can I find more information about Airzone products?

A: For further information about our products, please visit myzone.airzone.es.

Q: What is the power consumption in stand-by mode?

A: The stand-by consumption is 2.10 W (110 Vac) and 3.12 W (230 Vac).

Q: What is the maximum transmission distance for the Airzone Flexa 3.0 system?

A: The maximum transmission distance in open space is 40 meters.

AIRZONE FLEXA 3.0 MAIN CONTROL BOARD

Configurable electronic board that controls the system through wired and wireless devices. Externally powered at 110 / 230 Vac. Wall mounted.

Functionalities

• Control and management of the thermostats (up to 8 zones).
• Power outputs for motorized elements.
• Relay outlet configurable as CMV (Controlled Mechanical Ventilation) or boiler.
• Control gateway management.
• Communication with units of integral control of the installation.
• Communications with other external control systems through integration bus.
• For further information about our products, go to myzone.airzone.es

TECHNICAL SPECS

N L|
---|---
V máx.| 110/230 Vac
I máx.| 250 mA
 Frequency| 60/50 Hz
Stand-by consumption

/ Consumo em stand-by

| 2.10 W (110 Vac)

3.12 W (230 Vac)

Protección sobre corriente módulo

/ Module over-current protection

| ****

250 mA

AZ1 – AZ2 – AZ3 – IU – CAN|
Cable apantallado

| 2 x 0,22 + 2 x 0,5

mm2

 | 12 V
DM1|
Cable apantallado y trenzado

| 2 x 0,22 + 2 x 0,5

mm2

Communications protocol

| MODBUS RS-485

Par – 19200 bps

P3|
Communications protocol

| ****

Airzone

Frequency

| 868.12 MHz (EU)

915.2 MHz (EEUU, Canada, Australia, Nueva Zelanda)

Radiation power| 0 dBm
Maximum distance in open

| 40 m
 |
 | M1 … M8|
---|---|---
Nº of outputs| 8
Maximum number of outputs| 2
 | V max| 12 V
 | I max| 150 mA
 | O1 – O2|
Nº of relays| 2
 | V max| 250 Vac / 24 V
 | I max| 12 A
Operating temperaturas

 | Storage

| -20 … 70 ºC
Operation| 0 … 50ºC
Mechanical aspects
Protection class| IP 21
 | Weight| 554 g
 | Bluetooth|
protocol| Bluetooth v5.0 and BLE specificaction
Class| Class-1, class-2 and class-3 transmitter

ASSEMBLY

DEVICE ELEMENTS

Description

AZ1/2/3| / Airzone connection bus
P3| Wireless module
SW1| SW1
DM| Automation bus
CAN| CAN connection bus
IU| AC unit bus
M1…M8| Actuator outputs
DI1| Alarm input (normally close)

AI1| Temperature probe
O1| AC start-stop relay
O2| CMV/Boiler
N L| Power
ON/OFF|  Contact on/off (optional))

SELF- DIAGNOSIS

D1

| Data reception from automation bus

| Blinking

| Verde Green

Verde

D2

| Data transmission from automation bus

| Blinking

| Rojo Red

Vermelho

D3

| Main control board activity| Blinking| Verde

Green Verde

D4

| Data transmission from connection bus

| Blinking

| Rojo Red

Vermelho

D5

| Data reception from connection bus

| Blinking| Verde

Green Verde

D6

| AC unit On/Off

| Switches

| Verde Green

Verde

D7

| CMV/Boiler| Switches| Verde

Green Verde

D8

| Data transmission from AC unit bus

| Blinking| Rojo Red

Vermelho

D9

| Data reception from AC unit bus

| Blinking| Verde

Green Verde

D10

| Wireless data packets reception

| Switches

| Verde Green

Verde

D11

| Main control board power

| Fixe

| Rojo Red

Vermelho

D18

| Associated element|

Fixed

| Verde

Green Verde

D19

| Association channel: active

| Fixe

| Rojo Red

Vermelho

D80

| Data transmission from CAN| Blinking| Rojo Red

Vermelho

D79

| Data reception from CAN

| Blinking

| Verde Green

Verde

A

| Open dampers

| On

| Verde Green

Verde

Close dampers| o On

| Rojo Red

Vermelho

CONNECTION

Do not connect the “-“ pole to the “+” terminal. It may damage the device.

EU.BAC

Application

| Variable air volume system (without h/c coil)
Heating| Cooling
Control accuracy (K)| 0.2| 0.3

FCC / ISED

This device complies with FCC / ISED regulatory notices.

BLUETOOTH

In case there is no webserver available, you can perform programming through Bluetooth. Please, refer to the QR code if you need assistance with programming.

References

• Airzone | Leader in soluzioni di controllo HVAC
• Myzone - Mi Airzone
• Myzone - Meu Airzone

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>