HAKKO 631 Desoldering Gun Holder Instruction Manual

June 17, 2024
Hakko

HAKKO-logo

HAKKO 631 Desoldering Gun Holder

HAKKO-631-Desoldering-Gun-Holder-product

Product Information

CAUTION
Spring iron holders will become extremely hot. Make sure these areas do not come directly into contact with your bare skin.

Single holder

  • Spring iron holder
  • Tube (black or yellow)
  • Cleaning sponge
  • Iron holder base

Double holders

  • Spring iron holder
  • Tube (black or yellow)
  • Cleaning sponge
  • Iron holder base

For HAKKO 373

  • Spring iron holder
  • Tube (blue)
  • Cleaning sponge
  • Iron holder base
  • Guide pipe

For HAKKO 903-904

  • Spring iron holder
  • Tube (blue)
  • Cleaning sponge
  • Iron holder base

For HAKKO 802-809

  • Spring iron pin holder
  • Tube (red)
  • Cleaning sponge
  • Iron holder base

Outer Dimensions
Iron holder base 80mmX137mm (3.1in.X5.4in.) Inside diameter of iron receptacle ML/L…….30mm(1.2in.) S…….28mm(1.1in.) 802-809…….31mm(1.2in.) 903-904…….26.5mm(1.0in.)

Set Contents

No. Name Contents
631-01 HAKKO 631 ML Spring iron holder ML(1) Iron holder base (1)Cleaning

sponge (1)
631-02| HAKKO 631 S| Spring iron holder S (1) Iron holder base (1)Cleaning sponge (1)

Note
When using the 373, please place the iron so that the guide pipe of the 373 is to the right or left of the tip. Placing the guide pipe above the tip will melt the solder inside of the guide pipe.

Specifications

Part Description
A1042 Spring iron holder
B1468 Tube for 900M, 900L, 907-913

CAUTION
Spring iron holders will become extremely hot. Make sure these areas do not come directly into contact with your bare skin.

Overview

HAKKO-631-Desoldering-Gun-Holder-fig- \(1\)

Outer Dimensions

  • Iron holder base 80mmX 137mm(3.1in.X5.4in.)
  • The inside diameter of the iron receptacle
    • M/L…..30mm(1.2in.)
    • S……28mm(1.1in.)
    • 802.809……31mm(1.2in.)
    • 903.904 …………. 26.5mm(1.0in.)

Note

  • When using the 373, Please place the iron so that the guide pipe of the 373 is to the right or left of the tip.
  • Placing the guide pipe above the tip will melt the solder inside of the guide pipe.

What’s In The Box

HAKKO-631-Desoldering-Gun-Holder-fig- \(2\)

FAQ

  • What should I do if the iron holder becomes too hot to touch?
    Avoid direct contact with bare skin when the spring iron holder is hot. Use appropriate safety equipment when handling.

  • Can the cleaning sponge be replaced?
    Yes, the cleaning sponge is designed to be replaceable. Ensure you use the correct size for your model.

  • What is the purpose of the guide pipe on the HAKKO 373 iron holder?
    The guide pipe is designed to help guide the iron tip into the holder without damaging the tip. It should not be placed directly above the tip to avoid melting the solder inside.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals