HAKKO FM-2022 SMD Parallel Remover Owner’s Manual
- June 13, 2024
- Hakko
Table of Contents
FM-2022
SMD PARALLEL REMOVER
The HAKKO FM-2022 SMD Parallel Remover uses revolutionary parallel action
between the tip ends (one tip remains stationary) allowing greater surface
contact between the tip and the component and providing more efficient and
even heat transfer.
Whether removing small chips or larger SOP components, the parallel action of
the FM-2022 also allows for a more secure hold on the component.
FEATURES & BENEFITS
- The Parallel Remover uses the same quick-change composite tip technology as the FM-206 soldering station
- A fixing collar properly aligns the tips opposite each other
- Holder with sleep function
FM2022-05
CONVERSION KIT
Includes everything shown in picture.
CONTENTS
For Part No. FM2022-05 (Conversion Kit w/ Handpiece & Holder)
| Part No. | Description |
|---|
FM2022-02
FH200-03
B2300
B3253| FM-2022 SMD parallel remover
Handpiece holder with sponge
Heat resistant pad
Connector cord
For more information Scan QR Code.
https://qrcodes.pro/qBW1eW
SPECIFICATIONS
For Part No. FM2022-02 (Handpiece Only)
| Tip Series | T16 see below (Tips Sold Separately) |
|---|---|
| Station Compatibility | FM-203 & FM-206 see page 64 |
| Power Consumption | 140 W / 24 V |
| Temperature Range | 400 °F – 750 °F / 200 °C – 400 °C |
| Temperature Stability | ±9 °F / ±5 °C |
| Tip-to-Ground Resistance | < 2 Ω |
| Tip-to-Ground Potential | <2 mV (typical 0.6 mV) |
T16 SERIES TIPS FOR USE WITH FM-203 & FM-206
| Part No. | A | B |
|---|---|---|
| T16-1001 | 0.008 in. / 0.2 mm | N/A |
| T16-1002 | 0.03 in. / 0.7 mm | 0.02 in. / 0.5 mm |
| T16-1003 | 0.03 in. / 0.7 mm | 0.04 in. / 1.0 mm |
| T16-1004 | 0.03 in. / 0.7 mm | 0.08 in. / 2.0 mm |
| T16-1013 | 0.03 in. / 0.7 mm | 0.12 in. / 3.0 mm |
TIPS for CHIP Components
| Part No. | A | B |
|---|---|---|
| T16-1005 | 0.03 in. / 0.7 mm | 0.24 in. / 6.0 mm |
| T16-1006 | 0.03 in. / 0.7 mm | 0.31 in. / 8.0 mm |
| T16-1007 | 0.03 in. / 0.7 mm | 0.39 in. / 10.0 mm |
| T16-1008 | 0.03 in. / 0.7 mm | 0.51 in. / 13.0 mm |
| T16-1009 | 0.03 in. / 0.7 mm | 0.63 in. / 16.0 mm |
| T16-1010 | 0.03 in. / 0.7 mm | 0.79 in. / 20.0 mm |
| T16-1011 | 0.03 in. / 0.7 mm | 0.98 in. / 25.0 mm |
| T16-1012 | 0.03 in. / 0.7 mm | 0.71 in. / 18.0 mm |
TIPS for SOP Components
