QUOIZEL LWS6714A1 2 Light Semi Flush Mount User Guide

QUOIZEL LWS6714A1 2 Light Semi Flush Mount User Guide

Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00 p.m., EST, Friday.
For the quickest response, please visit Quoizel.com and click on Contact Us.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

1. RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
2. RISQUE DE CHOC ÉLECTRIQUE – Avant de commencer l’installation, coupez l’électricité au niveau de la boîte de disjoncteurs ou du coffret à fusibles principal. /
3. RIESGO DE DESCARGA ELÉCTRICA:
4. RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
5. RISQUE D’INCENDIE – Utilisez les ampoules précisées par les marques ou les étiquettes sur le luminaire.
6. RIESGO DE INCENDIO: utilice bombillas que coincidan con las marcas y/o rótulos de la lámpara.

CAUTION

• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
• For your safety, read instructions completely before beginning installation
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.

LIGHT SOURCE

2 BULBS REQUIRED

*Please check with bulb manufacturer for dimming capabilities.

BULB COMPARISON

**
BULB BASE TYPE

BULB SHAPE**

BULB COMPARISON

TYPE A / TIPO A
**LED***

PACKAGE CONTENTS

TOOLS REQUIRED

1. 
2. 
3. C – If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly. Adjust the length of the pre-assembled
   mounting screws by unscrewing the pre-assembled hex nut. Screw the mounting screws in or out of the crossbar until the correct length is achieved. Then, re-attach the ceiling canopy
   White wire (neutral) from outlet box                    White from fixture
   
   Black or red wire (hot) from outlet box                Black from fixture
   Bare or green ground wire from outlet box            Ground wire from fixture
   *Green ground screw on crossbar optional        Ground wire from fixture
4. 
5. 

CARE AND MAINTENANCE

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.

TROUBLESHOOTING

PROBLEM

|

POSSIBLE CAUSE

|

CORRECTIVE ACTION

|
---|---|---|---

Bulbs will not light.

|

1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.

|

1. Replace light bulb.Make sure power supply is on.
2. Check wiring. Vérifiez le câblage.
3. Test or replace the switch.

|
Fuse blows or the circuit breaker trips when light is turned on.|
Crossed wires or power wire is grounding out.|
Check wire connection. Vérifiez les connexions.|

MADE IN CHINA

Documents / Resources

| QUOIZEL LWS6714A1 2 Light Semi Flush Mount [pdf] User Guide
LWS6714A1, 611728378571, LWS6714A1 2 Light Semi Flush Mount, 2 Light Semi Flush Mount, Semi Flush Mount, Flush Mount, Mount
---|---

References

• Quoizel | Artisans In Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>