kogan KAHTCSR18WA 1800-2400-3000W Ceiling Strip Radiant Heater User Guide

kogan KAHTCSR18WA 1800-2400-3000W Ceiling Strip Radiant Heater

Safety & Warnings

1. Ensure the unit is affixed correctly onto the wall.
2. The heater is to be installed so that the controls cannot be touched by a person who is using a bath or shower.
3. Consult a qualified electrician or service technician if the power cord is damaged.
4. Always store the heater when not in use.
5. Make sure the heater has cooled down before storing it away.
6. Do not use the heater in an infirm person’s living room without supervision.
7. Ensure the heater keeps a certain distance away from other furniture or appliances, to avoid hazard or damage.

If a stationary appliance is not fitted with the supply cord and a plug, or with other means for disconnection from the supply mains or being able to separate contact in all poles that provide full disconnection under overvoltage category Ill conditions, the instructions shall state that means for disconnection must be incorporated in the fixed wiring by the wiring rules.

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Before First Use
Read and follow all the instructions in this document even if you feel you are familiar with the product and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product card) and the date you received the product together with your purchase receipt and warranty and service information. Retain this in the even that warranty service is required.

Noted: The rating of this product which is marked on the product brand card is based on the specific loading
tests. Normal use or the use of other recommended attachments may draw differently.

NOTE: When the heater is first used you may detect some smell and smog, this is normal. When new, the protective oils used on the element during production will burn off on first use. Allow the appliance to heat up in an open environment and the smell will disappear over a short period.

Important Safety Guards
When using any electrical product, basic safety precautions should always be followed, including the following:

Warning: to reduce the fire risk, electrical shock or injury to persons or property: This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant supervision is provided.

• Read all instructions carefully before using the product and keep them for future reference.
• Use only the voltage specified on the rating plate of the heater
• Do not cover the grilles, or block entry or exhaust of airflow by placing appliance against any surface and keep all objects at least 1 meter from the front, side and rear of the appliance.
• Do not place the product close to a radiant heat source.
• Do not use in areas near where gasoline, paint or other flammable liquids are used or stored.
• To avoid burns, do not let bare skin touch the hot surface. Switch off and let cool before moving.
• Do not immerse in liquid or allow water into the interior of the heater, as this could create an electrical shock hazard.
• Do not operate any appliance with a damaged cord, plug or after the appliance malfunctions or has been dropped or damaged in any manner. Return to the qualified electrical person for examination, electrical of mechanical adjustment, service or repair.
• Do not touch the appliance with wet hands
• The most common cause of overheating is deposits of dust or fluff in the heater. Ensure these deposits are removed regularly by unplugging the heater and vacuum-cleaning air vents and grilles.
• Do not use this product in a window because rain may cause electric shock.
• Do not use an abrasive cleaning appliance. Clean with a damp cloth (not wet) rinse in soapy water only, always remove plug from the mains supply before cleaning.
• Do not connect the appliance to the mains voltage until completely installed and adjusted.
• Do not use the product in the immediate surroundings of a bath, a shower or a swimming pool or other liquids.
• Switch off and let the surface cool before moving.
• Do not dish up the power cord when operating this heater, which could be sufficient to become a hazard.
• Do not operate any appliance with a damaged cord, or plug or after the appliance malfunctions or has been dropped or damaged in any manner. Return to the qualified electrical person for examination, electrical of mechanical adjustment, service or repair.
• Do not touch the appliance with wet hands
• The most common cause of overheating is deposits of dust or fluff in the heater. Ensure these deposits are removed regularly by unplugging the heater and vacuum-cleaning air vents and grilles.
• Do not use this product in a window because rain may cause electric shock.
• Do not use an abrasive cleaning appliance. Clean with a damp cloth (not wet) rinse in soapy water only, always remove the plug from the mains supply before cleaning.
• Do not connect the appliance to the mains voltage until completely installed and adjusted.
• Do not use the product in the immediate surroundings of a bath, a shower a swimming pool or other liquids.
• Switch off and let the surface cool before moving.
• Do not dish up the power cord when operating this heater, which could be sufficient to become a hazard.
• Using an extension cord with this product is not recommended.
• Be ensure not to connect the power cord when not operating the heater.
• Do not allow the cord to come into contact with the heated surface during operation.
• Do not run the cord under the place where people usually. To avoid heater tripping or people fall.
• Do not twist, kink or warp the cord around the heater, as this may cause the insulation to waken and split. Always ensure that all cord has been removed from any cord storage area.
• Do not store the heater while it is still hot.
• Do not use this appliance with another programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned in incorrectly.
• All cover of this appliance is intended to protect direct access to the heating elements and must be in place when the appliance is working.
• Use this product based on the described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• This appliance can used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the appliance if it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
• CAUTION – Some parts of this product can become very hot and cause burns. Particular attention must be given where children and vulnerable people are present.
• The installation instructions for heaters for mounting at high level shall state that the heater must be installed at least 1,8 m above the floor.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard. This heater is not suitable to be used on long pile carpets or flokati rugs.

Overview

CIRCUIT DIAGRAM

PRODUCT CONTROL PANEL

1. Power Switch button
2. Display screen ON/OFF button
3. Up button
4. Lock button
5. Timing switch
6. Down button

Operation

Before first use, please read this manual

1. Take out the heater from the carton carefully, please save the carton for off-season storage,
2. Firmly fixed heaters according to the installation instructions,
3. Do not use the same socket with other high-power appliances to avoid overloading.

Switch ON

1. The heater is connected to power; turn on the power switch, and the PCB light will begin flashing.
2. Press to turn on the heater, screen shows the temperature of the room, if it is lower than the preset temperature, the heater will be working. The indicator light will blink.

Lock Function

1. Press the fir “ ” first when operating then press the “ ” and “LOCK” indicator lights to light up. All keys are invalid when the Lock function is activated.
2. Display screen ON/OFF function
3. The function of switching on the screen Press “ “, the screen will power off but the indication light will be lighting, Press ” ” again the screen will be lighting again.

Temperature Setting

1. Press” ” you can set the temperature, press the” ” to increase or decrease 1°C. The maximum is 45°C; the lowest is 5°C. Finally, set the temperature to the effective temperature, the system will automatically save the set temperature, automatically return to operational status, and display the room temperature.
2. Timing switch OFF setting
3. When press the “ “, the “88” will flash, then press the “” “” you can set the time, the minimum set-up time is one hour, and the maximum set time is 9 hours. Each time you press the “O” or “C” the time will increase or decrease by 1 hour. After the time is set, the system will automatically save and return to operational status, temperature and time again exchanged display.

Switch OFF

1. Press ” the heater is on standby at any time, the PCB light still flashing,
2. Turn off the power switch, the heater is in shutdown.

Warning

1. This heater heats up when in use. To avoid burns, do not touch the hot surface.

Service

1. When you require service, contact the local dealer or qualified service centre

Replacement of Power Cord

1. The power cord must be replaced by a service agent or equivalent persons to prevent a hazard.

Child Supervision

1. This appliance is not intended to be used by children or infirm persons without supervision.

Installation

• Step one: use the screws to install two of the fixed frame to the machine above, as shown in figure A
• Step two: use the screws to install two of the fixed frame on the wall or ceiling, as shown in Figure B
• Step three: connect the machine with a screw, as shown in figure C
• Ceiling installation: the distance from the wall of the electrical appliances to 200mm, as shown in Figure 1
• Double hanging ceiling installation: two electrical appliances are connected through a connecting frame is installed on the ceiling, as shown in Figure 2
• Wall-mounted appliances: height from the ground at least 2200mm, from the height of the ceiling is 200mm, as shown in Figure 3
• User manual is subject to change without notice. For the latest version of your user manual, please visit https://www.kogan.com/usermanuals/

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>