kogan KABTH30PINA 30 Pin Bluetooth Adapter User Manual

Table of Contents

Specifications

Step 1: Unboxing

Step 2: Powering On

Connect the Music Receiver to a power source using the provided 30pin Dock.

Step 3: Pairing with a Bluetooth Device

Make sure your Bluetooth device is in pairing mode.
Turn on the Music Receiver by pressing the power button.
On your Bluetooth device, go to the Bluetooth settings and search for available devices.
Select the Music Receiver from the list of available devices.
If prompted, enter the pairing code provided in the user manual or on the device screen.
Once successfully paired, you can start using the Music Receiver to stream audio from your Bluetooth device.

Step 4: Adjusting Volume and Playback

To adjust the volume, use the volume controls on your Bluetooth device or the connected audio system.
To pause or resume playback, press the play/pause button on your Bluetooth device or use the controls on the connected audio system.
To skip to the next or previous track, use the corresponding buttons on your Bluetooth device or the connected audio system.

Step 5: Powering Off

To turn off the Music Receiver, press and hold the power button until the device powers off.

FAQ

Q: What is the transmission distance of the Music Receiver?
- The Music Receiver has a transmission distance of up to 10 meters.
Q: Can I connect multiple Bluetooth devices to the Music Receiver at the same time?
- No, the Music Receiver can only be connected to one Bluetooth device at a time.
Q: How do I reset the Music Receiver?
- To reset the Music Receiver, press and hold the power button for 10 seconds until the device resets.

Music Receiver x 1 pc
Thank you for the purchasing our 30 pin bluetooth adapter! Please read this manual carefully to get details on how to operate the device correctly. Please keep a copy of this manual safe for future reference!

Notes

Keep the unit away from high temperatures and damp environments; place it in ventilated and dry environments. Exposure to rain and severe shock is forbidden!
Do not open the cover to avoid electrical shock or any other accidents. For repairs, ask for advice from the Kogan Customer Support team.
Pull it out of the dock when you are not planning to use it.

Bluetooth music receiver connects directly to iPod/iPhone4 speaker 30-pin dock, and then the red LED lamp and the blue LED lamp will flicker alternately until they enter pairing mode, which means the device starts to work normally.
After it enters pairing mode, enable the Bluetooth function for the devices such as iPad, iPhone, Bluetooth PC, cell phone and any other digital products with Bluetooth function. Search Bluetooth devices or new devices to find I-LINK and connect it. Password input for pairing is needed, the default password is: 0000.
After successful pairing, the red LED lamp will turn off and the blue LED lamp will flicker slowly, which means the Bluetooth has been connected correctly. Then you can play music wirelessly.
To change the play device during normal operation, disconnect the connected Bluetooth PC /tablet/smartphone, and then perform the pairing connection again for other Bluetooth devices.

Technical Spec