Kogan KABTHDJBLKA Wireless Headphones Midnight Black User Manual
- June 16, 2024
- Kogan
Table of Contents
Kogan KABTHDJBLKA Wireless Headphones Midnight Black
Product Usage Instructions
Bluetooth Mode
Operation: Usually, the setup procedure relates to the setup, connection, or Bluetooth menu in your mobile phone or Bluetooth device. Follow these steps:
- Click on “search for Bluetooth device” on your phone.
- Your phone will find the headphone name “513” or a similar pairing name and ask if you want to connect. Click “confirm” or “yes”.
- Input the pairing password or PIN code “0000” and click “yes” or “confirm”. The headphones will connect with your Bluetooth device successfully.
If the headphone enters power-on mode before the red and blue LED light glitters in turn, please turn off the power and operate it again.
Wired Headphone Function
The headphones can be used as a wired headphones by attaching the 3.5mm audio cable. Follow these steps:
- In the state of power off, insert the 3.5mm audio cable to use the headphones as a wired stereo headphone.
- Please adjust the volume of sound sources when using it as a wired headphone. In this case, the volume control of the headphones won’t be workable.
Symbol of LED Light
- Power on: Blue light is on.
- Power off: No light.
- Charging: The red light is on. No light is on when fully charged.
- Power Shortage: Red light flashes.
- Pairing mode: Red and blue lights flash in turn.
FAQ
- Q: Where can I find the user manual?
- A: The user manual can be found at https://manual-hub.com/.
- Q: How long does the battery last?
- A: The headphones have a standby time of approximately 100 hours and a successive talking time of about 8 hours.
- Q: What is the charging time?
- A: The charging time is 2-3 hours.
What’s in the Box
- Headphones
- Micro USB Cable
- 3.5mm audio cable
Please read carefully this manual before using headphones, and keep a copy handy for future reference.
Know your headphones
- Toggle switch – Three Direction – Three Functions
- Move Upwards: Volume + / Previous track
- Move Downwards: Volume – / Next track
- Press it In Pause / Play
- Power button / Bluetooth power button
- Micro USB slot
- Line in slot
- Mic
Specification and Parameter
- Dimension: 200x170x75(mm)
- Weight: 175g（bare headphone, without packaging）
- Charging interface: Micro USB
- Press buttons: two (power button + toggle switch ）
- Battery: 3.7V/250mAh
- Charging specification: Micro USB
- Charging input: 5V/1.0A
- Charging indication: Solid Red LED light
- Standby time: about 100 hours
- Successive talking time: about 8 hours
- Charging time: 2-3 hours
- Volume control: 16 ranks, 3dB variation in each rank
- Working temperature: -20～70℃ during the charging period
- Storage temperature: -40～80℃
Speaker parameter
- Speaker diameter: Φ40mm
- Impedance: Impedance: 32Ω
- Sensitivity: S.P.L:110dB S.P.L.at 1KHz
- Rated power: 20mW
- Frequency Response: 100Hz-9000Hz
Microphone parameter
- Microphone Unit: Φ4*1.5mm
- Directivity: Omni direction
- S.P.L: -42±3dB
- Impedance: ≤2.2KΩ
- Frequency Response: 20-20,000HZ
- Operating voltage: 4.2V
Bluetooth Mode
- Device Mode Number: BT513
- Bluetooth Protocol version: CSR, Version 2.1+EDR
- Remote control to the player: Volume up and down, Previous /Next, Pause/Play
- Receiver range: 10m / 360°
- Pairing code: 0000
- SNR: -82dBm
- Carrier frequency: 2402MHz – 2480MHz
- Frequency response: 20Hz – 20,000Hz
- Successive working time: Approximately 8 hours
- Standby time: Approximately 100 hours
Operation
Turn ON: In the state of power-off, press and hold the power button for
1sec, the headset will send out two “di-di” Prompt tones and a blue LED will
be on; the blue and red LED light will glitter in turn if holding the power
button for 4 sec.
Turn OFF: In the state of power-on, press and hold the power button for 3
seconds till the blue LED light glitters three times. There will be four
“dodo” voices from loud to low. Now the unit is turned off.
Pairing: In the state of power-off, press and hold the power button for
3s until the red and blue LED light glitters in turn, the headphone enters
into pairing mode. In this case, the headset can be paired with the Bluetooth-
enabled device.
Usually, the Setup procedure relates to the “setup”,” connection” or
“Bluetooth” menu in your mobile phone or Bluetooth device. Click “search for
Bluetooth device”, and your phone will find the headphone name ”513” or a
similar pairing name and ask if you want to connect, then click “confirm” or
“yes”. Afterwards, input the pairing password or PIN code ”0000” and click
”yes” or “confirm”, the headphones will connect with your Bluetooth device
successfully.
The headphone will enter power-on mode if releasing power button before the red and blue LED light glitters in turn. In this case, please turn off the power and operate it once again.
Answering calls: Press the power button once to answer incoming calls.
Dialing calls: If the headset is paired with the mobile phone, dialling
the numbers on the cell phone will enable the conversation on the headset
automatically.
Ending calls: Ongoing conversations on cell phones can be ended by
pressing the power key once.
The redial latest number: The cell phone will automatically dial the last
dialled phone number by double pressing the power key on the Bluetooth
headset. We can hear the prompt tone from the headset.
Volume control: In the state of music or calls, move the toggle switch
upwards to increase the sound and move it downwards to decrease the sound.
Previous /Next: Move the toggle switch upwards and hold it for a short
while to come to the previous song, then move the toggle switch downwards and
hold it for a short while to come to the next song.
Pause /Play: Press the toggle switch button inside to pause or play the
music.
Wired headphone Function
- The headphone can be used as the wired headphone. Just simply attach a 3.5mm audio cable.
- In the state of power off: It can be used as the wired stereo headphone by inserting the 3.5mm audio cable. Please adjust the volume of sound sources when it is as the wired headphone. In this case, the volume control of the headphones can’t be workable.
Symbol of LED Light
- Power on —Blue light is on.
- Power off —No light.
- Charging —Red light is on. No light is on when is fully charged.
- Power Shortage —Red light flashes.
- Pairing mode —Red and blue lights flash in turn