QUOIZEL LWS7243D1 Whitlock 3 Light 12 in Matte Black and Brushed Nickel Semi Flush mount light Instruction Manual
- June 16, 2024
- QUOIZEL
Table of Contents
QUOIZEL LWS7243D1 Whitlock 3 Light 12 in Matte Black and Brushed Nickel Semi Flush mount light
Thank You
Thank you for purchasing this QUOIZEL product. If you have any questions or problems, please call our customer service department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00 p.m., EST, Friday. For the quickest response, please visit Quoizel.com and click on Contact Us.
1-844-564-3055
E-mail : cs@quoizel.com
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
LIGHT SOURCE
3 BULBS REQUIRED (SOLD SEPARATELY)
*Please check with bulb manufacturer for dimming capabilities.
-
BULB BASE TYPE
-
BULB SHAPE
-
BULB COMPARISON
TOOLS REQUIRED
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY | Stock Part # |
|---|---|---|---|
| A | Crossbar Assembly | 1pc | 915742KIT |
| B | Wire Connector | 3pcs | |
| C | Outlet Box Screw | 2pcs | |
| D | Winged Nut | 1pc | N/A |
| E | Lock Washer | 1pc | |
| F | Ceiling Canopy | 1pc | |
| G | Cap | 1pc | |
| H | Stem Assembly | 1pc | |
| I | Center Column | 1pc | |
| J | Shade | 1pc | G15738SH |
| K | Socket Assembly | 1pc | N/A |
Installation
C – If the ceiling canopy is not snug against the ceiling, remove it from the
crossbar assembly. Adjust the length of the pre-assembled mounting screws by
unscrewing the pre-assembled hex nut. Screw the mounting screws in or out of
the crossbar until the correct length is achieved. Then, re-attach the ceiling
canopy.
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulbs will not light. |
- Bulb is burned out.
- Power is off.
- Faulty wire connection.
- Faulty switch.
|
- Replace light bulb.
- Make sure power supply is on.
- Check wiring.
- Test or replace the switch.
Fuse blows or the circuit breaker trips when light is turned on.| Crossed wires or power wire is grounding out| Check wire connection
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>