QUOIZEL LWS7243B1 Whitlock 6 Light Matte Black and Brushed Nickel Modern Contemporary Damp Rated Chandelier Instruction Manual
- June 16, 2024
- QUOIZEL
Table of Contents
ITEM # 5648947
MODEL # LWS7243B1
USE AND CARE GUIDE
6-LIGHT LINEAR CHANDELIER
LWS7243B1 Whitlock 6 Light Matte Black and Brushed Nickel Modern
Contemporary Damp Rated Chandelier
Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service
department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00
p.m., EST, Friday.
For the quickest response, please visit Quoizel.com and click on Contact Us.
1-844-564-3055
E-mail:cs@quoizel.com
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
LIGHT SOURCE
6 BULBS REQUIRED (SOLD SEPARATELY)
*Please check with bulb manufacturer for dimming capabilities.
|
---|---
BULB COMPARISON
TOOLS REQUIRED
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY | Stock Part# |
|---|---|---|---|
| A | Crossbar Assembly | 1pc | 915741KIT |
N/A
B| Wire Connector| 3pcs
C| Outlet Box Screw| 2pcs
D| Quick Link| 4pcs
E| Ceiling Canopy| 1pc
F| Fixture Chain| 2pcs| M381CHTMBK
G| Fixture Loop Assembly| 2pcs| N/A
H| Fixture| 1pc
I| Shade| 6pcs| G15736SH
D – If the ceiling canopy is not snug
against the ceiling, remove it from the crossbar assembly. Adjust the length
of the pre-assembled nipple by unscrewing the pre-assembled hex nut. Screw the
nipple in or out of the crossbar until the correct length is achieved. Then,
re-attach the ceiling canopy.
A Pull the supply wires and ground wire up through the fixture chain
alternating links.
B Push the ends of the supply wires and ground wire up through the canopy loop
and into the outlet box. The remaining slack wire will be inserted into the
ceiling canopy.
Trim excess fixture wire leaving a minimum of 6 inches hanging out of the
outlet box.
Separate the smooth side and ribbed side of supply wire.
Using wire strippers, strip each wire 1/2 inch from the end.
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulbs will not light. | 1.Bulb is burned out. |
2.Power is off.
3.Faulty wire connection.
4.Faulty switch.| 1.Replace light bulb.
2.Make sure power supply is on.
3.Check wiring.
4.Test or replace the switch.
Fuse blows or the circuit breaker trips when light is turned on.
Crossed wires or power wire is grounding out.
Check wire connection.
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>