LANCOM XS-5110F Aggregation Switch User Guide

LANCOM XS-5110F
Quick Reference Guide

XS-5110F Aggregation Switch

1. Configuration interfaces RJ-45 & micro USB (Console)

2. Connect the configuration interface a via the included serial configuration cable to the serial interface of the device you want to use for configuring / monitoring the switch. Alternatively use the interface b with the included micro USB cable.

3. USB interface
   Connect a USB stick to the USB interface to store general configuration scripts or debug data.
   You can also use this interface to upload a new firmware.

4. SFP+ interfaces 1G/10G
   Insert suitable LANCOM SFP+ modules into the SFP+ interfaces 1 to 8. Choose cables which are compatible with the SFP+ modules and connect them as described in the SFP modules mounting instructions www.lancom-systems.com /SFP-module-MI.

5. TP Ethernet interfaces 1G/2.5G/5G/10G (combo ports) Connect the interfaces 9 to 10 via high quality CAT.6 Ethernet cables to your PC or a LAN switch.

Please observe the following when setting up the device

• The mains plug of the device must be freely accessible.
• Do not rest any objects on top of the device and do not stack multiple devices.
• Keep the ventilation slots of the device clear of obstruction.
• Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times. https://manual- hub.com/

MOUNTING AND CONNEC TING THE DEVICE

1. System / Fan / Stack
   System: green| Device operational
   ---|---
   System: red| Hardware error
   Fan: red| Fan error
   Stack: off| No connection
   Stack: green| As master device: port activated and connected to slave device
   Stack: orange| As slave device: port activated and connected to master device
2. Reset button
   ~5 sec. pressed| Device restart
   ---|---
   7~12 sec. pressed| Configuration reset and device restart
3. SFP+ ports 1G / 10 G
   Off| Port inactive or disabled
   ---|---
   Green| Link 10 Gbps
   Green, blinking| Data transfer, link 10 Gbps
   Orange| Link 1 Gbps
   Orange, blinking| Data transfer, link 1 Gbps
4. TP Ethernet ports 1G / 2.5G / 5G / 10G
   Off| Port inactive or disabed
   ---|---
   Green| Link 10 / 5 / 2.5 Gbps
   Green, blinking| Data transfer, link 10 / 5 / 2.5 Gbps
   Orange| Link < 2.5 Gbps
   Orange, blinking| Data transfer, link < 2.5 Gbps

TECHNICAL DATA

Hardware****

D), network connectors on the front

Interfaces

SFP+| 8 SFP+ 1 / 10 Gbps, downlink ports for aggregation of subordinate access switches;
ports 7 & 8 configurable by software as stacking ports
---|---
TP Ethernet| 2 TP Ethernet 1 / 2.5 / 5 / 10 Gbps, for use as additional downlink ports or for connection to
a NAS or router, configurable as stacking ports
Console| 1 each RJ-45 / micro USB
USB| 1 * USB

Declaration of Conformity
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU. The full text of the EU declaration of conformity is available at the following internet address: www.lancom-systems.com/ce/
Package Content

configuration cable

LANCOM, LANCOM Systems, LCOS, LAN community and Hyper Integr ation are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to futurepr oducts and their attributes. LANCOM Systems r eserves the right to change these without notice. No liability for technical err ors and / or omissions. 111945 / 0620

References

• DoC - LANCOM Systems GmbH
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>