QUOIZEL LWS7243C1 3 Light Pendant User Guide
- June 16, 2024
- QUOIZEL
Table of Contents
QUOIZEL LWS7243C1 3 Light Pendant
Product Information
Specifications
- Bulb Base Type: Medium (E26)
- Bulb Shape: Type A
- Bulb Comparison:
- LED* – 8.5 Watts
- Incandescent – 60 Watts
Package Contents
- Stock Part#: Crossbar Assembly (A)
- Quantity: 1pc
- Stock Part#: Wire Connector (B)
- Quantity: 3pcs
- Stock Part#: Outlet Box Screw (C)
- Quantity: 2pcs
- Stock Part#: Quick Link (D)
- Quantity: 2pcs
- Stock Part#: Ceiling Canopy (E)
- Quantity: 1pc
- Stock Part#: Fixture Chain (F)
- Quantity: 1pc
- Stock Part#: Fixture Loop Assembly (G)
- Quantity: 1pc
- Stock Part#: Stem Assembly (H)
- Quantity: 1pc
- Stock Part#: Center Column (I)
- Quantity: 1pc
- Stock Part#: Socket Assembly (J)
- Quantity: 1pc
- Stock Part#: Shade (K)
- Quantity: 1pc
Product Usage Instructions
Step 1: Adjusting the Fixture Chain Length
A. Pull the supply wires and ground wire up through the fixture chain
alternating links.
B. Push the ends of the supply wires and ground wire up through the loop
and into the outlet box.
Step 2: Removing the Canopy
C. Remove the canopy.
Step 3: Inserting the Slack Wire
D. Insert the remaining slack wire into the outlet box.
Care and Maintenance
Possible Cause: Replace light bulb.
FAQ
Q: What should I do if I have any questions or problems with the product?
A: Please call our customer service department at
1-844-564-3055 or email us at
cs@quoizel.com.
Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service
department,8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00
p.m., EST, Friday.
For the quickest response, please visit Quoizel.com and click on Contact Us.
1-844-564-3055
E-mail:cs@quoizel.com
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
LIGHT SOURCE
3 BULBS REQUIRED (SOLD SEPARATELY)
Please check with bulb manufacturer for dimming capabilities.
BULB COMPARISON
TOOLS REQUIRED
PACKAGE CONTENTS
PART| DESCRIPTION| QUANTITY
| Stock Part#
---|---|---|---
A
| Crossbar Assembly| 1pc| 915739KIT
B
| Wire Connector| 3pcs
C
| Outlet Box Screw| ****
2pcs
D
| Quick Link Maillon rapide| ****
2pcs
E
| Ceiling Canopy| 1pc
F
| Fixture Chain Chaîne| 1pc| M381CHTMBK
G| Fixture Loop Assembly| ****
1pc
| N/A
H| Stem Assembly| 1pc
I| Center Column| 1pc
J| Socket Assembly| 1pc
K| Shade| ****
1pc
| ****
G15737SH
ASSEMBLY
D – If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly. Adjust the length of the pre-assembled nipple by unscrewing the pre-assembled hex nut. Screw the nipple in or out of the crossbar until the correct length is achieved. Then, re-attach the ceiling canopy.
- A Adjust fixture chain length.
- B – C Install fixture chain.
- A – Pull the supply wires and ground wire up through the fixture chain alternating links.
- B – Push the ends of the supply wires and ground wire up through the loop and into the outlet box.
- C – Remove the canopy.
- D – Insert the remaining slack wire into the outlet box.
Trim excess fixture wire leaving a minimum of 6 inches hanging out of the
outlet box.
Separate the smooth side and ribbed side of supply wire.
Using wire strippers, strip each wire 1/2 inch from the end.
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM| POSSIBLE CAUSE| CORRECTIVE ACTION|
---|---|---|---
The lights will not turn on.
Les lumières ne s’allument pas. / Las luces no se encienden.
| 1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
| 1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
|
Fuse blows or the circuit breaker trips when light is turned on.
|
Crossed wires or power wire is grounding out.|
Check wire connection.|
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>