HALL ULTRA-4K Dual 4K UHD Daisy Chainable Receiver User Manual
- May 15, 2024
- HALL
Table of Contents
- HALL ULTRA-4K Dual 4K UHD Daisy Chainable Receiver
- Product Information
- Product Usage Instructions
- Important Safety Instructions
- Introduction
- FEATURES
- Package Contents
- Setup
- Connectors & Indicators
- Troubleshooting
- Specifications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HALL ULTRA-4K Dual 4K UHD Daisy Chainable Receiver
Product Information
Specifications
- Product Name: ULTRA-4K
- Features: Dual 4K UHD, HDMI, & USB 2.0 Extender over a single CAT6 to 100m/328ft with 3-port splitter
- Sender: ULTRA-4K-S
- Receiver: ULTRA-4K-R
- Supported Resolutions: 1080p @ 60 Hz and 4K UHD @ 30 Hz
- Distance: Up to 100 meters (328 feet)
- Sender Inputs: 2 HDMI inputs, 1 USB input
- Sender Outputs: 2 HDMI outputs, 2 USB outputs
- Receiver Outputs: 2 HDMI outputs, 6 USB ports
Product Usage Instructions
Setup
- Ensure the Sender and Receiver are connected to power sources.
- Connect the Sender to your dual-head PC using the HDMI and USB inputs.
- Connect the Sender to the Receiver using a single CAT6 cable up to 100m in length.
Installation
- Place the Sender and Receiver units in well-ventilated areas away from heat sources.
- Ensure proper cable management to avoid damage to cables.
Connectors & Indicators
- The Sender and Receiver units feature HDMI inputs/outputs, USB inputs/outputs, and RJ45 ports for connectivity.
- LED indicators on the units show power status and connectivity status.
FAQ
-
Q: What resolutions are supported by the ULTRA-4K extender?
A: The extender supports resolutions including 1080p @ 60 Hz and 4K UHD @ 30 Hz. -
Q: How many USB ports are available on the Receiver?
A: The Receiver provides a total of 6 USB ports, with 2 specifically labeled for keyboard and mouse use.
Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com
ULTRA-4K
Dual 4K UHD, HDMI, and, & USB 2.0 Extender over a single CAT6 to 100m/328ft
with 3-port splitter, sender, and Daisy-Chainable receiver
USER MANUAL
July 18, 2023
Important Safety Instructions
- Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
- Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.
- To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not place sources of naked flames, such as lighted candles, on the unit.
- Clean this apparatus only with dry cloth.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Protect the power cord from being walked on or pinched particularly at plugs.
- Only use attachments / accessories specified by the manufacturer.
Introduction
OVERVIEW
- The ULTRA-4K is comprised of the ULTRA-4K-S Sender and the ULTRA- 4K-R Receiver. The system is used to extend USB 2.0 and dual display HDMI video supporting various resolutions including 1080p @ 60 Hz and 4K UHD @ 30 Hz. Dual video and USB can be extended to one or more Receivers up to a distance of 100 m (328 ft.) over a single CAT6 cable.
- The Sender features two HDMI inputs and one USB input for connection to a dual-head PC. It provides two local HDMI outputs (corresponding to the two HDMI inputs) and features an internal USB hub with two local USB outputs. Additionally, there are three separate RJ45 output ports to extend video and USB to multiple remote locations.
- The Receiver provides two HDMI outputs and 6 USB ports. Two of the USB ports are labeled for use with keyboard and mouse; however, they can also be connected to other USB devices such as KVM switches or touchscreen displays if desired.
- For connection of other USB devices such as printers or scanners, four additional general-purpose USB 2.0 ports are available. For security purposes, USB memory devices are not supported by default. If you want to enable USB memory support, please contact Hall Technologies.
- In a setup with one sender going to only one Receiver, the USB ports automatically pair with the Sender. However, when there are more than one ULTRA-4K Receiver connected to the same sender, only one Receiver can be paired at a given time. Pairing is accomplished using a push button on the front panel of the Receiver. A corresponding LED next to the button indicates USB pairing status with the Sender.
- Each Receiver features an RJ45 “LINK OUT” port that can be daisy- chained to down-stream Receivers. All signals are re-buffered, so the LINK OUT port can drive cables to 100 meters long.
- It is important to note that the RJ45 output ports (on the Sender or the Receiver), can also be connected to ULTRA-V Receivers. ULTRA-V Receivers provide only one video output and no USB. The ULTRA-V Receivers show Video A by default; however, they can be configured to display Video B if desired. Please refer to the ULTRA-V User’s Manual for further details.
FEATURES
- Supports high resolution HDMI video including FHD. (1920×1080), WQUD (2560×1440), and 4K UHD (3840×2160)
- Two video streams and one USB port extended over a single CAT6 cable up to 100 m/328ft.
- Full plug-and-play support with USB keyboard, mouse, and connected peripherals.
- Computer OS independent – No driver or software required.
- Local HDMI and USB output on the Sender
- Three Sender extension outputs and one Receiver daisy-chain output to distribute video to multiple locations.
- No video calibration required, no video quality reduction due to cable length or resolution.
- Locking power supply connector to prevent inadvertent disconnection.
- Sender includes mounting ears for standard 19” rack; Receiver includes mounting brackets for surface mounting.
Package Contents
ULTRA-4K-S
- 1x ULTRA-4K-S
- 2x Rack mount ears and screws
- 1x power supply (Hall P/N 511-IEC5V4AP5L, MFG P/N 3A-186DB05)
- 1x user manual card
ULTRA-4K-R
- 1x ULTRA-4K-R
- 2x Surface-mount brackets
- 1x power supply (Hall P/N 511-IEC5V4AP5L, MFG P/N 3A-186DB05)
- 1x user manual card
Setup
INSTALLATION
- Connect the PC HDMI outputs to the ULTRA-4K-S ports marked “HDMI A IN” and “HDMI B IN” using quality HDMI cables.
- Connect the PC USB to the ULTRA-4K-S port marked “USB IN” using a USB cable.
- Optionally, connect HDMI displays to HDMI A/B OUT ports, and USB peripherals to the USB LOCAL ports.
- Using a CAT6 able, connect the ULTRA-4K-S “link out” port to the ULTRA-4K-R “link in” port.
- Connect remote HDMI displays to the ULTRA-4K-R HDMI A and HDMI B output ports.
- Connect keyboard, mouse, KVM Switch, or touchscreens to the ULTRA-4K-R ports marked as KBRD/MOUSE
- Optionally, connect other USB devices to any of the USB 2.0 ports.
- Optionally, connect external speakers to “audio out” to use audio from “HDMI A” or “AUDIO INPUT” of ULTRA-4K-R.
While HDMI is the most widely adopted video standard, there are a number of computer and display manufacturers that rely on DisplayPort for higher resolutions such as 2560 or 4K. Hall Technologies offers 4K compatible adapters to convert between these two video standards.
Note : These adapters are unidirectional. For example, the DisplayPort to HDMI adapter cannot convert a HDMI signal to DisplayPort.
- To connect to a source (PC) with DisplayPort output, use GC-DP-HD.
Virtually all monitor and TV’s have HDMI (or DVI) inputs. But if your display only has a display port input, the following adapter convers HDMI to DP. 
Connectors & Indicators
ULTRA-4K-S Front
| No. | Name | Description |
|---|---|---|
| 1 | SERVICE | USB-Mini connection, used for upgrading firmware or configuring |
parameters such as EDID via free PC GUI.
**** 2| USB HUB| LEDs show presence of USB input and local devices.
The Hub LED indicates that the hub is active (not that PC/Host has the ability
to put the hub in “selective suspend” mode in which case the Hub LED will turn
off. Hosts usually do this if no downstream devices are connected to the hub.
The Port 1 and 2 LEDs correspond to the two USB (type A) ports available on
the rear panel. They should be on if there is a USB device connected to them.
3| **** VID/LINK|
- Status indicators of HDMI A/B
- VID: This LED is lit when HDMI video input is present.
- ACT: This LED blinks when HDMI extender core processor is active (normal)
4| POWER| Power LED lights when power is supplied.
ULTRA-4K-S Back
| No. | Name | Description |
|---|---|---|
| **** 1 | **** HDMI A IN/OUT | HDMI A input port and local output. HDMI A IN is |
extended to ULTRA-4K-R HDMI A OUTPUT.
2| HDMI B IN/OUT| HDMI B input port and local output. HMDI B IN is extended to
ULTRA-4K-R HDMI B OUTPUT.
**** 3| USB
IN/LOCAL1/LOCAL2
| USB input port, and local outputs. USB IN is extended to ULTRA-4K-R USB
1.1/USB 2.0 ports.
4| REMOTE OUTPUTS/LINK 1/LINK2/LINK3| Three separate outputs for
connection to remote ULTRA-4K-R receivers. Use CAT6 cable to extend up to 100
m/328 ft.
– GREEN LED on left side of ports indicates an active link to ULTRA-4K-R or ULTRA-V-R.
5| 5V DC| Power input. Connect supplied 5V DC locking power supply to power sender.
ULTRA-4K-R Front
| No. | Name | Description |
|---|---|---|
| 1 | SERVICE | USB-Mini connection, used for upgrading firmware or configuring |
parameters such as USB Mass Storage Class device filtering via free PC GUI.
**** 2| USB 2.0 PAIRING| When only one receiver is connected to a
sender, the receiver will automatically pair by default and then the PAIRING
LED will be on. If multiple receivers are connected, the user needs to decide
which receivers USB ports is to be paired with the sender. To change pairing
to a different receiver, press the button and the PAIRING LED will light. If
the pairing LED is solidly lit, the receiver has successfully paired with the
sender, but if it is blinking, the pairing was unsuccessful, and you should
press the pairing button again until the LED is solidly lit.
3| **** HDMI A/B VID/LINK|
- Status indicators of HDMI A/B
- VID: This LED is lit when HDMI video is being output.
- ACT: This LED blinks when HDMI processor is active (normal)
- LINK: This LED indicates the system is actively receiving video and data. Blinks if system is not receiving video.
4| POWER| Power LED lights when power is supplied.
ULTRA-4K-R Back
| No. | Name | Description |
|---|---|---|
| **** 1 | HDMI A/HDMI B |
OUTPUT
| Outputs HDMI from ULTRA-4K-S HDMI A/HDMI B Input ports respectively.
2| USB
1.1/KBRD/MOUSE
| Connect keyboard/mouse/KVM switchers or other HID input devices including
touchscreens to K/M ports.
4| USB 2.0| These are general purpose ports for other USB devices
such as printers or scanners. By default, USB memory devices are not allowed,
and these USB ports do not support USB webcams.
5| LINK IN/LINK OUT| LINK IN receives video/USB rom ULTRA-4K-S;
LINK OUT is used to daisy-chain to another
ULTRA-4K-R or ULTRA-V-R.
6| 5V DC| Power input. Connect supplied 5V DC locking power supply to power receiver.
Troubleshooting
If you are experiencing problems getting the ULTRA-4K to work properly, please use the following troubleshooting suggestions.
- Ensure that all connections are secure. Check all status LEDs to ensure proper operation.
- Try resetting the system by unplugging the power supply, waiting 5 seconds, and plugging it back.
- Try restoring factory defaults using the PC GUI.
Specifications
Video
Standards| DVI (single link)
Connectors
| ULTRA-4K-S
- 2x HDMI inputs, 2x HDMI outputs
- 1x USB-B host port, 2x USB-A device ports 3x RJ45 Link outputs
- 1x 2.1 mm locking DC power input
ULTRA-4K-R
- 2x HDMI outputs
- 2x USB-A 1.1 device ports 4x USB-A 2.0 device ports
- 1x RJ45 link input, 1x RJ45 link output
- 1x 2.0mm locking SC power input
Resolutions|
- PC VGA to WQXGA (2560×1600)
- HDTV 480p to 4K UHD including QHD (2560×1440)
Refresh Rates|
- 60 Hz for resolutions up to and including HD (1920×1080) and WUXGA (1920×1200)
- 30 Hz for resolutions above and including QHD (2560×1440)
Other Signals
USB|
- ULTRA-4K-S: USB 2.0 (2) from built-in hub
- ULTRA-4K-R: USB 1.0 (2) and USB 2.0 (4)
General
Power Supply| 100 VAC to 240 VAC, 47-63 Hz, External; 5 VDC
Temp/humidity|
- Storage: -40 to +158 degrees F (-40 to +70 degrees C)/ 10% to 90%, non- condensing
- Operating: +32 to +122 degrees F (0 to +50 degrees C) / 10% to 90%, non- condensing
Typical DC| 5 VDC, 4.0 A power supply
Current Draw|
- ULTRA-4K-S: 2.5 A DC depending on # and type of connected USB devices.
- ULTRA-4K-R: 1.5 A DC depending on # and type of connected USB devices.
Cooling| Convection
Enclosure Type| Metal (Steel)
Dimensions|
- ULTRA-4K -S: 6.09” L x 11.23” W x 1.66” H
- ULTRA-4K -R: 5.04” L x 9.00” Q x 1.12” H
General
Product Weight| Model only
- ULTRA-4K -S: 2.8 lbs (1.3 Kg)
- ULTRA-4K-R: 1.3 lbs (0.6 Kg)
Shipping
- ULTRA-4K-S: 4.4 lbs (2.0 Kg)
- ULTRA-4K-R: 3.1 lbs (1.4 Kg)
Safety| CE
EMI/EMC| CE, FCC, Class A
MTBF| 90,000 hours (estimate)
Warranty| 3 years parts and labor
© Copyright 2023. Hall Technologies All rights reserved.
1234 Lakeshore Drive, Coppell, TX 75019
halltechav.com /
support@halltechav.com
+1 (800)-959-6439
Hall Technologies June 18, 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>