DUCATI RTADM002 RFID Dashboard User Manual

DUCATI RTADM002 RFID Dashboard

Product Information

Specifications

Product Usage Instructions

Installation

To install the radio equipment in your Ducati vehicle, follow the steps below:

1. Ensure the vehicle’s power is turned off.
2. Locate the Dashboard RTADM002 unit and the Loop antenna.
3. Carefully connect the Loop antenna to the Dashboard RTADM002 unit.
4. Securely mount the Dashboard RTADM002 unit in the designated location in your vehicle’s dashboard.
5. Connect any necessary cables to the Dashboard RTADM002 unit, following the provided instructions.
6. Double-check all connections to ensure they are secure.
7. Turn on the vehicle’s power and test the radio equipment to confirm proper installation.

Functionality

The radio equipment installed in your Ducati vehicle offers the following features:

• Ducati Multimedia System: Allows for Bluetooth connectivity, enabling you to connect your mobile devices and enjoy audio playback, hands-free calling, and more.
• Antitheft: The radio equipment is equipped with antitheft measures to help protect against unauthorized access and usage.

Operation

Once the radio equipment is properly installed, follow these instructions to use the Ducati Multimedia System:

1. Ensure your mobile device has Bluetooth enabled.
2. On the Ducati vehicle dashboard, locate and activate the Bluetooth function.
3. On your mobile device, search for available Bluetooth devices.
4. Select the Ducati Multimedia System from the list of available devices.
5. Follow any additional on-screen prompts to complete the pairing process.
6. Once paired, you can use the Ducati Multimedia System to play audio, make hands-free calls, and access other supported features.

FAQ

• Q: What is the transmission range of the Bluetooth feature?
• A: The transmission range of the Bluetooth feature may vary depending on environmental factors, but it typically extends up to 30 feet (10 meters) from the Ducati vehicle.
• Q: Can I connect multiple mobile devices to the Ducati Multimedia System simultaneously?
• A: No, the Ducati Multimedia System can only be connected to one mobile device at a time. To switch devices, you will need to disconnect the current device and pair a new one.
• Q: How can I reset the radio equipment to its factory settings?
• A: To reset the radio equipment to its factory settings, refer to the user manual or contact Ducati customer support for specific instructions.

Regulatory & Warnings section of the Ducati vehicle manual
Table 1

Radio equipment installed in

the vehicle

| Frequency band| Max. transmission power
---|---|---
Dashboard RTADM002 with Loop antenna: EL017601_0, made by ZADI S.p.A.| 134.2 KHz (119 ÷ 135 KHz)| < 42 dBμA/m (10m) with antenna:

Inductance range: 1.02 ÷ 1.06 mH (@100 kHz) Resistance: 19.2 ± 3% Ω

Number of turns: 166 (Φ of wire 0.125 mm)

Max gain: 0 dBi

Ducati Multimedia System

(Bluetooth)

| 2402 ÷ 2480 MHz| 4.4mW
Antitheft| 433.92MHz (±75KHz)| <0.6mA

Table 2

Via Presolana 33/35

24030 Medolago (Bergamo), Italy

Ducati Multimedia System (Bluetooth)| COBO S.p.a.

Via Tito Speri, 10 25024 Leno (BS), Italy

Antitheft| PATROLLING

Via Cesare Cantù, 15/C

22031 Albavilla (CO), Italy

Regulatory & Warnings section of the Ducati vehicle manual
EU Directive 2014/53/EU

• Addresses of radio component manufacturers
• All radio components must carry the manufacturer’s address according to the provisions of Directive 2014/53/EU. For components that, due to their size or nature, cannot be furnished with a sticker, the respective manufacturers’ addresses as required by law are listed in Table 2.

Note
Only a skilled person can access and install the device.

Regulatory & Warnings section of the Ducati vehicle manual
Your vehicle is equipped with a range of radio equipment. The manufacturers of this radio equipment declare that this equipment complies with Directive 2014/53/EU where required by law. The complete text of the EU declaration of Conformity is available at the following web address: certifications.ducati.com.

FCC STATEMENT

United States (USA)
“This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.”

“Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”
“NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.”

The dashboard has been approved to operate with the antenna type above listed with the maximum permissible gain indicated.
Antenna types not included in that list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

• RF exposure Information according to 2.1091/2.1093 / OET bulletin 65:
• Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• The manufacturers of these radio equipment declare that devices comply with the FCC

CANADA certification
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The dashboard has been approved by Innovation, Science and Economic Development Canada to operate with the antenna type above listed, with the maximum permissible gain indicated.
Antenna types not included in that list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
This device complies with Health Canada’s Safety Code. The installer of this device should ensure that RF radiation is not emitted over Health Canada’s requirement.
RF Exposure Information
This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

CONTACT

• Canadian Representative:
• DUCATI CANADA
• 777 Bayly Ave. Ajax ON Canada L1S7G7
• Tel No.: +1 705 786 7768
• www.anatel.gov.br.

References

• Anatel — Agência Nacional de Telecomunicações
• Redirect Notice

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>