Rokid RES102 5000mAh Smart Portable Terminal User Manual

June 16, 2024
Rokid

Rokid RES102 5000mAh Smart Portable Terminal

Specifications

  • USB-A to USB-C cable
  • Micro HDMI to Type-C cable
  • User manual
  • Rokid Station

Product Usage Instructions

Power On/Off and Screen Control

To turn on the device, press the Power key for 2 seconds. To turn off the device, press and hold the Power key for 3.5 seconds or force it to turn off by pressing and holding the Power key for 8 seconds.
To turn on or turn off the screen of the glasses, press the Power key.

Sleep Mode
In on state, disconnect Rokid Station from the glasses to enter sleep mode automatically. Alternatively, you can press the Power key for 1.5 seconds to access the Sleep, Shut Down, and Restart menus and select the sleep option. Rokid Station will also enter sleep mode if the screen is turned off for 55 seconds or if no operation is performed within 5 minutes.

Battery Indicator
During charging, the charging completion indicator remains solid, and the battery level indicator blinks. When charging is complete, all battery level indicators turn solid.

Status Indicator
The status indicator shows different colours to indicate the working mode, loading status, and sleep status. Solid blue indicates the working mode, blinking blue indicates the loading status and solid orange indicates the sleep status.

Packaging List

After unpacking the box, you shall see the following items:

  1. USB-A to USB-C cable
  2. Micro HDMI to Type-C cable
  3. User manual
  4. Rokid Station

Product Introduction

Rokid-RES102-5000mAh-Smart-Portable-Terminal-fig-2

  1. Direction key
  2. OK key
  3. Home key
  4. Back key
  5. Apps key
  6. Setting key
  7. Power key
  8. Volume key
  9. USB-C port
  10. Micro HDMI port
  11. Status indicator
  12. Battery indicator

Connect to your Rokid AR glasses
Connect Rokid Station to your Rokid AR glasses using the Micro HDMI to USB-C cable.

Insert one side of the cable into the USB-C port of the glasses

Insert the other side of the cable into the Micro HDMI port of Rokid Station .Rokid-RES102-5000mAh-Smart-Portable-Terminal-fig-4

Power key

  • Press the Power key for 2 seconds to turn on the device.
  • Press and hold the Power key for 1.5 seconds. The Sleep, Shut Down, and
  • Restart menus appear.
  • Press and hold the Power key for 3.5 seconds to turn off Rokid Station.
  • Press and hold the Power key for 8 seconds. This will force Rokid Station to turn off.
  • Press the Power key to turn on or turn off the screen of the glasses.

Rokid-RES102-5000mAh-Smart-Portable-Terminal-fig-6

Adjust Volume
Press the Volume + or Volume – key to increase or reduce the volume.

Wake up
When Rokid Station is in sleep mode, press the Power key to wake it up

Rokid-RES102-5000mAh-Smart-Portable-Terminal-fig-7

Sleep

  1. In one state, disconnect Rokid Station from the glasses. Rokid Station goes into sleep mode automatically.
  2. Press the Power key for 1.5 seconds. The menus appear. You can select a menu to make Rokid Station sleep.
  3. Press the Power key to turn off the screen of the glasses. After the screen is turned off for 55 seconds, Rokid Station will enter sleep mode automatically.
  4. Rokid Station goes to sleep if you do not perform any operation within 5 minutes.

Indicators

Charging Status:
During charging, the charging completion indicator remains solid, and the battery level indicator keeps blinking. When charging is complete, all battery level indicators turn solid.

View the Battery Level

  • Press the Power key. All battery level indicators turn on one by one.
  • In off-state, if Rokid Station cannot power on again due to a low battery level, the first battery level indicator flashes twice after you press the Power key

Status Indicator

  • Solid blue: indicates the working mode.
  • Blinking blue: indicates the loading status.
  • Solid orange: indicates the sleep status.

Safety Precautions

  1. Keep your device dry. Do not use your device in a dusty, dirty, damp, or high-salinity location (such as the seaside). Improper use of your device may result in electronic circuit failures.
  2. Do not use your device during a thunderstorm. Thunderstorms can cause the malfunction of your device or increase the likelihood of electrical shock.
  3. Use your device at its normal operating temperature ranging from 0°C to +35°C. Store your device and accessories in a place where the temperature is between -10°C and +45°C. Low- or high-temperature conditions might cause the malfunction of your device.
  4. Charge your device only with the adapter and cable that came with your device.
  5. If you want to charge your device by connecting a USB-C port, make sure that the port has the USB-C symbol and that its performance complies with the specifications for USB-C ports.
  6. Protect your device from high temperatures or getting close to heating equipment, such as strong sunlight, space heaters, microwave ovens, water heaters or ovens. If your device overheats, it may cause the battery to explode.
  7. Do not disassemble or modify, attempt to insert foreign objects into your device, or immerse or expose it to water or other liquids. This may result in a short circuit, battery leakage or overheating, and thus increase the risk of a fire or explosion.
  8. Do not dispose of your device in a fire. Doing so can cause fire or explosion.
  9. Dispose of your device by local regulations, and treat it separately from household waste. Improper disposal may result in an explosion. Therefore, you must comply with the local waste handling and recycling policies on the disposal of this device and its accessories.
  10. Do not allow children or pets to bite or chew on your device. Doing so may result in damages or explosions.
  11. Do not drop, squeeze or pierce your device. Excessive external pressure may damage your device or cause failures, short circuits, and even fire or explosion.
  12. Do not use unauthorized or incompatible adapters, power supplies or batteries. This may catch fire or cause other dangers.
  13. The device and its accessories may contain small components. Keep them out of the reach of children, who may damage them inadvertently or swallow these small components, which may lead to dangers such as choking.
  14. The device is equipped with a non-removable built-in battery. To avoid damaging the battery or the device, do not change the battery by yourself.
  15. Children under 13 years old (subject to domestic laws) are not recommended to use this product because their eyesight is not fully developed. If you are over
  16. years old (subject to local laws) but do not reach the legal age of majority, you must use our services under the supervision of your parents or legal guardians, and they must agree to abide by these Terms of Service.
  17. If you are under epilepsy, hypertension, heart disease, acrophobia, severe myopia, pregnant, and not suitable for a 3D immersive experience and stimulating experience, we don’t recommend using this product. If you experience dizziness or eye fatigue during use, stop using it immediately.
  18. Do not use the device at high volume for a long time to avoid hearing damage.
  19. Do not use this device while driving.

Special Notes

Due to some unique physical and chemical properties of lithium-ion battery materials, lithium batteries have gradually reduced capacity over time. In addition, the increasing number of charge and discharge cycles can lead to the capacity attenuation of lithium batteries.

Legal Notice

Copyright © 2014 – 2023 Hangzhou Lingban Technology Co., Ltd. All rights reserved. This document is for reference purposes only and does not constitute any form of commitment. The image shown here is indicatively only. Colour, weight, size or screen may differ from the image shown. If there is any inconsistency, the actual product shall govern.

Read this entire document carefully before using this product to understand your legal rights, responsibilities and safety instructions. Failure to read and follow the instructions and warnings in this document may result in property damage, safety accidents, and personal safety hazards. By using this product, you hereby signify that you have read this disclaimer carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your conduct while using this product and for any consequences thereof. You agree to use this product only for purposes that are proper and under all terms, any relevant policies and guidelines that Hangzhou Lingban Technology
Co., Ltd. has made and may make available. Hangzhou Lingban Technology Co., Ltd. accepts no liability for damages, injury or any legal responsibility incurred directly or indirectly from the use of this product.
To the extent permitted by law, Hangzhou Lingban Technology Co., Ltd. shall not be liable for any indirect, incidental, consequential, or punitive damages whatsoever (including but not limited to loss of business profits).

Disclaimer
This User Manual is published by Hangzhou Lingban Technology Co., Ltd. and may include typographical errors or other inaccuracies. Lingban Technology may make necessary improvements and/or changes to the information herein or to the programs and/or devices described in this publication at any time without any notice. However, these changes will be incorporated in new editions of the publication. The pictures in the User Manual are for illustration purposes only and the actual products may vary.

Scan the QR Code to watch the online user guide QR

FAQ

(Frequently Asked Questions)

  • Q: How do I turn on the device?
    • A: Press the Power key for 2 seconds to turn on the device.
  • Q: How do I enter sleep mode?
    • A: Disconnect the Rokid Station from the glasses or press the Power key for 1.5 seconds to access the Sleep menu.
  • Q: How do I know the battery level?
    • A: The battery level is indicated by the battery indicator LEDs. Refer to the LED patterns in the manual to determine the battery capacity.
  • Q: What do the different status indicator colours mean?
    • A: Solid blue indicates the working mode, blinking blue indicates the loading status and solid orange indicates the sleep status.

Rokid Station
RES102
Hangzhou Lingban Technology Co., Ltd.
E-mail: global-support@rokid.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals