Rokid RSR101 Station Remote User Manual
- June 16, 2024
- Rokid
Table of Contents
Rokid RSR101 Station Remote
Product Information
Specifications
- Product Name: Rokid Station Remote
- Material: Art paper
- Dimensions: 392mm x 168mm
- Power Source: 2 AAA batteries (not included)
- Bluetooth Range: Up to 30cm
- Operating Temperature: -20°C to 45°C (-4°F to 113°F)
- Wireless Technology: Bluetooth
- Voice Assistant: Google Assistant
Product Usage Instructions
Battery Installation
- When using the product for the first time, purchase two AAA batteries.
- Slide off the battery compartment cover located on the back of the remote.
- Insert the purchased batteries into the compartment.
- Close the battery compartment cover.
Bluetooth Pairing
- Place the Bluetooth remote within 30cm of the Rokid Station.
- Press and hold the Back + APPS buttons simultaneously for 3 seconds.
- The indicator light on the remote will start flashing, indicating it has entered pairing mode.
- Once successfully paired, the indicator light will flash twice slowly and then turn off.
Using Google Assistant
- To wake up Google Assistant, press the designated button on the remote.
- Upon pressing the VOICE button, the microphone starts recording and the indicator light remains on.
- Speak a command or ask a question while the microphone is active.
- To end the recording, press the Voice button again.
Low Power Indicator
When the remote’s power is low:
- The indicator light will flash rapidly while buttons are being pressed.
- After releasing all buttons, the indicator light will flash quickly for three seconds and then turn off.
Safety Precaution
Please follow these safety guidelines while using the Rokid Station Remote:
- Do not expose the remote to extreme temperatures outside the operating range of -20°C to 45°C (-4°F to 113°F).
- Avoid using the remote in wet or humid environments.
- Keep the remote away from direct sunlight and sources of heat.
- Do not disassemble or modify the remote.
- Keep the remote out of reach of children and pets.
FAQ
Q: What type of batteries does the Rokid Station Remote require?
- A: The Rokid Station Remote requires two AAA batteries (not included).
Q: How do I pair the Rokid Station Remote with Bluetooth?
- A: Follow these steps to pair the remote with Bluetooth:
- Place the remote within 30cm of the Rokid Station.
- Press and hold the Back + APPS buttons simultaneously for 3 seconds.
- The indicator light will start flashing, indicating pairing mode.
- Once paired successfully, the indicator light will flash twice slowly and then turn off.
Q: How do I activate Google Assistant?
A: Simply press the designated button on the remote to wake up Google Assistant.
Q: What should I do when the remote’s power is low?
- A: When the remote’s power is low, the indicator light will flash rapidly while buttons are being pressed.
- After releasing all buttons, the indicator light will flash quickly for three seconds and then turn off.
Q: What are the safety precautions for using the Rokid Station Remote?
- A: To ensure safe usage, please adhere to the following guidelines:
- Avoid exposing the remote to extreme temperatures outside the operating range of -20°C to 45°C (-4°F to 113°F).
- Do not use the remote in wet or humid environments.
- Keep the remote away from direct sunlight and heat sources.
- Do not attempt to disassemble or modify the remote.
- Keep the remote out of reach of children and pets.
Q: What are the legal notices for the Rokid Station Remote?
A: The device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
Install the Battery
- When you use the product for the first time, you need to buy two AAA batteries by yourself.
- Slide off the battery compartment cover on the back of the remote. Insert the batteries you bought and start using the remote.
Bluetooth Pairing
Pairing method:
- Place the Bluetooth remote within 30cm of the Rokid Station.
- Press and hold the “Back” + “APPS” buttons for 3 seconds. The indicator light will flash. This indicates the bluetooth remote has entered “pairing mode”.
- After the remote is successfully paired, the indicator light flashes twice slowly and then goes out.
Google Assistant
Press the button to wake up Google Assistant and engage in voice interaction with the device
- After you press the VOICE button, the microphone starts recording.
- The indicator light will remain on during the recording session.
- Speak a command, and press the Voice button again to end the recording.
Low Power Indicator
- When the remote power is low, the indicator light will flash fast while you are using it.
- When you stop pressing any buttons on the remote, the indicator light flashes quickly for three seconds and then goes out.
Safety Precaution
- Please keep the device dry. Do not use it in a dusty, dirty, humid, or high-salinity environment (such as beach, or seaside). This may cause circuit failure in the device.
- Do not use the device during a thunderstorm. Thunderstorms can cause the malfunction of the device and increase the risk of electric shock.
- Please use the device within its approved operating temperature range from 32℉ (0℃) to 95℉ (+35℃) of altitude, and keep it within its approved storage temperature range from -4℉ (-20℃) to 113℉ (+45℃).
- The environment with extreme temperatures may damage the device.
- Do not disassemble or modify the equipment, insert foreign matters, or immerse in water or other liquids.
- Do not allow children or pets to chew or suck the device or its accessories. Doing so may result in damages.
- Using an unapproved or incompatible charger, adapter or battery may cause a fire, explosion, or other dangers.
- The device and its accessories may contain small components. Keep them out of the reach of children, who may damage them by mistake or swallow these small components, which may lead to dangers such as choking.
Legal Notice
- Copyright ©Lingban Technology 2014 ~ 2023. All rights reserved. This document is for reference purposes only and does not constitute any form of commitment.
- The visual representation of the product here is indicative only. If there is any inconsistency, the actual product shall govern.
- Read this entire document carefully before using this product to understand your legal rights, responsibilities, and safety instructions. Failure to read and follow the instructions and warnings in this document may result in property damage, safety accidents, and personal safety hazards. By using this product, you hereby signify that you have read this disclaimer carefully and that you understand and agree to abide by the terms and conditions herein.
- You agree that you are solely responsible for your conduct while using this product and for any consequences thereof.
- You agree to use this product only for purposes that are proper and under all terms, any relevant policies and guidelines that Lingban Technology has made and may make available.
- Lingban Technology accepts no liability for damages, injury, or any legal responsibility incurred directly or indirectly from the use of this product.
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, according to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used per the
instructions, may cause interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connecting the equipment to a socket on a circuit different from that to which the receiver is connected.
- Contact the provider or a radio or TV technician for help.
IC Caution:
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.