Rokid RA201 Max AR Glasses User Manual
- June 16, 2024
- Rokid
Table of Contents
Rokid RA201 Max AR Glasses
Specifications
- Product Name: Rokid Max
- Compatibility: Android Phones running on Android 10 or later USB-C Port
- Adjustment Range for Myopia: 0.00 to -6.00 D
Product Usage Instructions
How to Wear
- Connect Rokid Max to a device that supports DisplayPort over USB-C.
- Wear the glasses from your forehead down to your face. Make sure the glasses rest comfortably on the bridge of your nose.
- Adjust the nose pads to a perfect point, which allows you to perfectly see the projected screen in the middle of your point of view.
Adjust Brightness
To adjust brightness:
- Press and hold the Brightness Button for 2 seconds to switch to 3D (SBS) Mode.
- Continue to press and hold the Brightness Button for 8 seconds to switch to 3D (3840 x 1080) Mode.
Myopic Adjustment
Rokid Max supports myopia (nearsightedness) adjustment from 0.00 to -6.00 D without wearing extra prescription glasses. To adjust:
- After wearing the Rokid Max, find the two diopters by touching them.
- Twist one Diopter Knob at a time until you can see a clear image for the corresponding eye. Repeat the same action with the other eye. When everything is clear, you are good to go.
What’s in the Box
After unpacking the box, you shall see the following items:
- Blackout Cover
- Rokid Max
- USB-C Cable
- Nose Pads
- Carrying Case
- User Manual
- Cleaning Cloth
Product Introduction
- Diopter Knobs
- Brightness Button
- Volume Button
- Proximity Sensor
- Directional Speakers
- USB-C Port
- Nose Pads
How to Use
- Rokid Max is a plug-and-play product that has no built-in batteries. Connecting it to a device that supports.
- DisplayPort over USB-C is recommended.
How to Wear
-
Connect Rokid Max to a device that supports DisplayPort over USB-C.
-
Wear the glasses from your forehead down to your face.
Make sure the glasses rest comfortably on the bridge of your nose. -
Adjust the nose pads to a perfect point, which allows you to perfectly see the projected screen in the middle of your point of view.
Adjust Brightness
Press the Brightness Button to adjust the brightness. The brightness has 6
levels of adjustment.
2D/3D Switch
Umschalten zwischen 2D- und 3D-Modus
- Press and hold the Brightness Button for 2s to switch to 3D(SBS) Mode. Continue to press and hold the Brightness.
- Button for 8s to switch to 3D(3840 x 1080) Mode.
Adjust Volume
Press the Volume “+” or Volume “-” Button to increase or reduce the volume.
Myopic Adjustment
Rokid Max supports myopia(nearsightedness) adjustment from 0.00 to -6.00 D without wearing extra prescription glasses.
- After wearing the Rokid Max, find the two diopters by touching them.
- Twisting one Diopter Knob at a time until you can see a clear image for the corresponding eye. Then repeat the same action with the other.
When everything is clear, you are good to go.
Nose Pads Setup
Blackout Cover Setup
- You can block the outside light by installing a Blackout Cover for Rokid Max to get a better viewing experience.
Safety Precaution
- Rokid Max is a plug-and-play product that has no built-in batteries. Connecting it to a device that supports DisplayPort over USB-C is recommended.
- This product supports myopia adjustment from 0.00 to -6.00 D. If the user’s myopia degree exceeds the above range, or suffers from other vision symptoms such as hyperopia, astigmatism, etc., the user cannot see the screen. Therefore, it is not recommended for such users to use the product.
- Children under 13 years old (subject to domestic laws) are not recommended for to use of this product because their eyesight is not fully developed. If the user is over 13 years old (subject to local laws) but does not reach the legal age of majority, he/she must use our services under the supervision of their parents or legal guardians, and their parents or legal guardians must agree to abide by these terms of service.
- people who have epilepsy, high blood pressure, heart disease, acrophobia, severe myopia, are pregnant, and are not suitable for 3D immersive experience and stimulating experience are not recommended to use this product. If you notice dizziness or eye fatigue during use, please stop using it immediately.
- Please do not use the device at high volume for a long time to avoid hearing damage.
- Please do not use this device while driving.
- Please do not use the device while doing strenuous exercise.
- Please keep the device dry. Do not use it in a dusty, dirty, humid, or high-salinity environment (such as beach, or seaside). This may cause circuit failure in the device.
- Do not use the device during a thunderstorm. The thunderstorms can cause the malfunction of device and increase the risk of electric shock.
- Please use the device within its approved operating temperature range from 32°F (0℃) to 95°F (+35℃) of altitude, and keep it within its approved storage temperature range from -4°F (-20℃) to 113°F (+45℃). The environment with extreme temperatures may damage the device.
- Do not put the device in an environment with high temperatures, such as strong sunlight, heaters, microwaves or conventional ovens. If the device overheats it may cause the battery to explode.
- Do not disassemble or modify the equipment, insert foreign matters, or immerse in water or other liquids.
- Do not put the device on fire as it may catch fire.
- Please dispose of the device according to local regulations. Do not dispose of the device as normal household waste. Please respect the local laws and cycling policy on the disposal of the product and its accessories.
- Do not allow children or pets to chew or suck the device or its accessories. Doing so may result in damages.
- Do not drop, squeeze, or pierce the device. Excessive pressure on the device may damage the device or cause a failure, or short circuit.
- The device and its accessories may contain small components. Keep them out of the reach of children, who may damage them by mistake or swallow these small components, which may lead to dangers such as choking.
Legal Notice
Copyright ©Lingban Technology 2014 ~ 2023. All rights reserved. This document
is for reference purposes only and does not constitute any form of commitment.
The visual representation of the product here is indicative only. If there is
any inconsistency, the actual product shall govern.
Disclaimer
- This product is not a toy and is not suitable for children under the age of 18. Adults should keep this product out of the reach of children and exercise caution when using it in the presence of children.
- This product is a smart glasses product that provides a smart wearable device experience when the power supply is working properly and no components are damaged. Lingban Technology reserves the right to update this disclaimer. Please visit the official website of the product or check your email regularly for the latest version.
- Please read this entire document carefully before using this product to understand your legal rights, responsibilities and safety instructions. Failure to read and follow the instructions and warnings in this document may result in property damage, safety accidents, and personal safety hazards. By using this product, you hereby signify that you have read this disclaimer carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your conduct while using this product and for any consequences thereof. You agree to use this product only for proper purposes and by all terms, any relevant policies and guidelines that Lingban Technology has made and may make available.
- Lingban Technology shall not be liable for any direct or indirect personal injury and property loss caused by not using this product by this product manual.
- To the extent permitted by law, Lingban Technology shall not be liable for any indirect, derivative, punitive, incidental or punitive damages (including loss of expected benefits).
FCC Statement
Labelling requirements
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interterence received, inc using interterence that may cause undesired operation..
Information to the user.
Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
Information to the user.
This equipment has been tested and found to comply with the limits for a Class
B digital device under Part 15 of the FCC Rules, These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one ormore of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver isconnected.
- Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-003(B)/NMB-003(B)
This Class B digital apparatus complies with Canadian ICES-003.” “Cet appareil
numérique de la classed Best conforme à la normed NMB-003 du Canada.”
Important Safety Warning
Never wear the headset in situations that require attention, such as running,
jumping or bicycling.
Immediately discontinue using the headset if any of the following symptoms are
experienced: seizures; loss of awareness; eye strain; eye or muscle twitching;
involuntary movements; altered, blurred, or double vision or other visual
abnormalities; dizziness; disorientation; impaired balance; impaired hand-eye
coordination; excessive sweating; increased salivation; nausea;
lightheadedness; discomfort or pain in the head or eyes; drowsiness; fatigue;
or any symptoms similar to motion sickness.
Do not drive, operate machinery, or engage in other visually or physically demanding activities that have potentially serious consequences (i.e., activities in which experiencing any symptoms could lead to death, personal injury, or damage to property), or other activities that require unimpaired balance and hand-eye coordination (such as playing sports or riding a bicycle, etc.) until you have fully recovered from any symptoms. See a doctor if you have serious and/or persistent symptoms.
If any part of your body becomes tired or sore while using the headset or its components, or if you feel symptoms such as tingling, numbness, burning or stiffness, stop and rest for several hours before using it again. If you continue to have any of the above symptoms or other discomfort during or after use, stop using and see a doctor.
Safe Use Environment
- The headset produces an immersive virtual reality experience that distracts you from and completely blocks your view of your actual surroundings. Always be aware of your surroundings before beginning use and while using the headset. Use caution to avoid injury.
- Serious injuries can occur from tripping, running into or striking walls, furniture or other objects, so clear an area for safe use before using the headset.
- Take special care to ensure that you are not near other people, objects, stairs, balconies, open doorways, windows, furniture, open flames, ceiling fans light fixtures or other items that you can bump into or knock down when using or immediately after using the headset.
Health and Hygiene Caution
- Prolonged use should be avoided, as this could negatively impact hand-eye coordination, balance, and multitasking ability.
- To reduce the risk of discomfort, adjust the inter-pupillary distance (IPD) for each user before use of the headset.
- Take at least a 10 to 15-minute break every 30 minutes, even if you don’t think you need it. Each person is different, so take more frequent and longer breaks if you feel discomfort. You should decide what works best for you.
- A comfortable virtual reality experience requires an unimpaired sense of motion and balance. Do not use the headset when you are: tired; need sleep; are under the influence of alcohol or drugs; are hung over; have digestive problems; are under emotional stress or anxiety; or when suffering from cold, flu, headaches, migraines, or earaches, as this can increase your susceptibility to adverse symptoms.
- We recommend seeing a doctor before using the headset if you are pregnant, elderly, have pre-existing binocular vision abnormalities or psychiatric disorders, or suffer from a heart condition or other serious medical condition.
- The headset is worn next to your skin and scalp. Stop using the headset if you notice swelling, itchiness, skin irritation or other skin reactions. If symptoms persist, contact a doctor.
- To avoid transferring contagious conditions (like a pink eye), do not share the headset with persons with contagious conditions, infections or diseases, particularly of the eyes, skin or scalp. The headset should be cleaned between each use with skin-friendly non-alcoholic antibacterial wipes and with a dry microfiber cloth for the lenses.
User Group
- This product should not be used by children under the age of 13.
- Adults should make sure children (age 13 and older) use the headset by health and safety warnings including making sure the headset is used as described in the user guide.
- Adults should monitor children (age 13 and older)who are using or have used the headset for any of the symptoms described in this health and safety warnings (including those described under the
- Discomfort and Repetitive Stress Injury sections), and should limit the time children spend using the headset and ensure they take breaks during use.
- VR device is not suggested for old people;
- VR device is not suggested for sick people, except for the usage with special medical guidance;
- VR device is not suggested for people with dioptric lower than (0.5).
Interference with Medical Devices
The Headset, Sensor, and Remote contain magnets or components that emit radio
waves, which could affect the operation of nearby electronics, including
cardiac pacemakers, hearing aids and defibrillators. If you have a pacemaker
or other implanted medical device, do not use the headset without first
consulting your doctor or the manufacturer of your medical device. Maintain a
safe distance between the headset and your medical devices, and stop using the
headset if you observe persistent interference with your medical device.
Operation and Maintenance
- Review the hardware and software recommendations for the use of the headset. The risk of discomfort may increase if recommended hardware and software are not used. The manufacturer shall specify the display technology and specific external display models for users. The manufacturer shall specify all the operation menus and controls that the user needs to adjust to achieve the best performance. The manufacturer shall guide the user to wear the HMD comfortably and how to clean the HMD.
This table is prepared under the provisions of 2011/65/EU.
- O: Indicates that the concentration of the listed hazardous substance in all homogeneous materials in this part is below the limit required in 2011/65/EU.
- X: Indicates that the concentration of the listed hazardous substance in all the homogeneous materials in this part is above the limit required in 2011/65/EU.
- Hazardous substances in the components marked with “X” in the table cannot be replaced due to the limitations of global technological development.
- Printed circuit board assemblies include printed circuit boards and their electronic and other components.
- Depending on the product model, the product you purchased may not contain all of the above components.
Copyright ©Lingban Technology 2014 ~ 2023. All rights reserved.
FAQ
- Q: What devices are compatible with Rokid Max?
- A: Rokid Max is compatible with Android Phones running on Android 10 or later.
- Q: Can I adjust the brightness of Rokid Max?
- A: Yes, you can adjust the brightness of Rokid Max by pressing and holding the Brightness Button.
- Q: Can I use Rokid Max if I have myopia?
- A: Yes, Rokid Max supports myopia (nearsightedness) adjustment from 0.00 to -6.00 D without wearing extra prescription glasses.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>