Rokid 400-113-0099 Max AR Smart Glasses User Manual
- June 13, 2024
- Rokid
Table of Contents
Rokid 400-113-0099 Max AR Smart Glasses
Product Information
The Rokid Max is a plug-and-play product that does not have built-in batteries. It is recommended to connect it to a device that supports DisplayPort over USB-C. The product comes with various accessories including a Blackout Cover, USB-C Cable, Nose Pads, Carrying Case, User Manual, and Cleaning Cloth. The Rokid Max features Diopter Knobs for myopia adjustment, a Brightness Button for adjusting brightness levels, Proximity Sensor, Directional Speakers, and a USB-C Port.
Product Usage Instructions
- Connect the Rokid Max to a device that supports DisplayPort over USB-C.
- Wear the glasses from your forehead down to your face, ensuring they rest comfortably on the bridge of your nose.
- Adjust the nose pads for a perfect fit, allowing you to see the projected screen clearly in the middle of your field of view.
- To adjust the brightness, press the Brightness Button. There are six levels of brightness adjustment.
- To switch between 2D and 3D modes, press and hold the Brightness Button for 2 seconds for 3D (SBS) mode or continue to press and hold for 8 seconds for 3D (3840 x 1080) mode.
- To adjust for myopia (nearsightedness), wear the Rokid Max and find the two diopters by touching them. Twist one Diopter Knob at a time until you can see a clear image for each eye.
- To block outside light for a better viewing experience, install the Blackout Cover for Rokid Max.
Safety Precaution: This product is not a toy and is not suitable for children under the age of 18. Adults should keep this product out of the reach of children and exercise caution when using it in the presence of children.
Scan the QR Code to watch online user guide
400-113-0099
Overseas global-support@rokid.com
Download and install Rokid AR App
Support Android Phones running on Android 10 or later
What’s in the Box
- Blackout Cover
- Rokid Max
- USB-C Cable
- Nose Pads
- Carrying Case
- User Manual
- Cleaning Cloth
Product Introduction
- Diopter Knobs
- Brightness Button
- Volume Button
- Proximity Sensor
- Directional Speakers
- USB-C Port
- Nose Pads
Quick Guide
How to Use
Rokid Max is a plug-and-play product that has no built-in batteries.
Connecting it to a device that supports DisplayPort over USB-C is recommended.
How to Wear
- Connect Rokid Max to a device that supports DisplayPort over USB-C.
- Wear the glasses from your forehead down to your face. Make sure the glasses rest comfortably on the bridge of your nose.
- Adjust the nose pads to a perfect point, which allows you to perfectly see the projected screen in the middle of your point of view.
Adjust Brightness
Press the Brightness Button to adjust the brightness. The brightness has 6
levels of adjustment.
2D/3D Switch
Press and hold the Brightness Button for 2s to switch to 3D(SBS) Mode.
Continue to press and hold the Brightness Button for 8s to switch to 3D(3840 x
1080) Mode.
Adjust Volume
Press the Volume “+” or Volume “-” Button to increase or reduce the volume.
Myopic Adjustment
Rokid Max supports myopia(nearsightedness) adjustment from 0.00 to -6.00 D
without wearing extra prescription glasses.
- After wearing the Rokid Max, find the two diopters by touching them.
- Twisting one Diopter Knob at a time until you can see a clear image for the corresponding eye. Then repeat the same action with the other. When everything is in clarity, you are good to go.
Nose Pads Setup
Blackout Cover Setup
You can block the outside light by installing a Blackout Cover for Rokid
Max to get a better viewing experience.
Safety Precaution
- Rokid Max is a plug-and-play product that has no built-in batteries. Connecting it to a device that supports DisplayPort over USB-C is recommended.
- This product supports myopia adjustment from 0.00 to -6.00 D. If the user’s myopia degree exceeds the above range, or suffers from other vision symptoms such as hyperopia, astigmatism, etc., the user cannot see the screen clearly. Therefore, it is not recommend-ed for such users to use the product.
- Children under 13 years old (subject to domestic laws) are not recommended to use this product because their eyesight is not fully developed. If the user is over 13 years old (subject to local laws) but does not reach the legal age of majority, he/she must use our services under the supervision of their parents or legal guardians, and their parents or legal guardians must agree to abide by these terms of service.
- For these people who are under epilepsy, high blood pressure, heart disease, acrophobia, severe myopia, pregnant, and not suitable for 3D immersive experience and stimulating experience are not recommended to use this product. If you notice dizziness or eye fatigue during use, please stop using it immediately.
- Please do not use device at high volume for a long time to avoid hearing damage.
- Please do not use this device while driving.
- Please do not use the device while doing strenuous exercise.
- Please keep the device dry. Do not use it in a dusty, dirty, humid, or high-salinity environment (such as beach, seaside). This may cause the circuit failure in the device.
- Do not use the device during a thunderstorm. The thunderstorms can cause the malfunction of device and increase the risk of electric shock.
- Please use the device within its approved operating temperature range from 32°F (0℃) to 95°F (+35℃) of altitude, and keep it within its approved storage temperature range from -4°F (-20℃) to 113°F (+45℃). The environment with extreme temperature may damage the device.
- Do not put the device into the environment with the high temperatures, such as strong sunlight, the heaters, the microwave or the conventional ovens. If the device overheats it may cause the battery to explode.
- Do not disassemble or modify the equipment, insert foreign matters, or immerse in water or other liquids.
- Do not put the device on the fire as it may catch fire.
- Please dispose of the device in accordance with local regulations. Do not dispose of the device as the normal household waste. Please respect the local laws and cycling policy on the disposal of the product and its accessories.
- Do not allow children or pets to chew or suck the device or its accessories. Doing so may result in the damages.
- Do not drop, squeeze, or pierce the device. Excessive pressure on the device may damage the device or cause a failure, short circuit.
- The device and its accessories may contain the small components. Keep them out of the reach of children, who may damage them by mistake or swallow these small components, which may lead to the dangers such as choking.
Legal Notice
Copyright ©Lingban Technology 2014 ~ 2023. All rights reserved. This document is for reference purposes only and does not constitute any form of commitment. The visual representation of the product here is indicative only. If there is any inconsistency, the actual product shall govern.
Disclaimer
- This product is not a toy and is not suitable for children under the age of 18. Adults should keep this product out of the reach of children and exercise caution when using it in the presence of children.
- This product is a smart glasses product that provides a smart wearable device experience when the power supply is working properly and no components are damaged. Lingban Technology reserves the right to update this disclaimer. Please visit the official website of the product or check your email regularly for the latest version.
- Please read this entire document carefully before using this product to understand your legal rights, responsibilities and safety instructions. Failure to read and follow the instructions and warnings in this document may result in property damage, safety accidents, and personal safety hazards. By using this product, you hereby signify that you have read this disclaimer carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all terms, any relevant policies and guidelines that Lingban Technology has made and may make available.
- Lingban Technology shall not be liable for any direct or indirect personal injury and property loss caused by not using this product in accordance with this product manual.
- To the extent permitted by law, Ling ban Technology shall not be liable for any indirect, derivative, punitive, incidental or punitive damages (including loss of expected benefits).
FCC Statement
15.19 Labeling requirements
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- his device must accept any interference received , include in a interference that may cause undesired operation. .
Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to user.
This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules, These limits are
destined to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. lf this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAN ICES-003(B)/NMB-003(B)
Important Safety Warning
Never wear the headset in situations that require attention, such as running,
jumping or bicycling. Immediately discontinue using the headset if any of the
following symptoms are experienced: seizures; loss of awareness; eye strain;
eye or muscle twitching; involuntary movements; altered, blurred, or double
vision or other visual abnormalities; dizziness; disorientation; impaired
balance; impaired hand-eye coordination; excessive sweating; increased
salivation; nausea; lightheadedness; discomfort or pain in the head or eyes;
drowsiness; fatigue; or any symptoms similar to motion sickness.
Do not drive, operate machinery, or engage in other visually or physically
demanding activities that have potentially serious consequences (i.e.,
activities in which experiencing any symptoms could lead to death, personal
injury, or damage to property), or other activities that require unimpaired
balance and hand-eye coordination (such as playing sports or riding a bicycle,
etc.) until you have fully recovered from any symptoms. See a doctor if you
have serious and/or persistent symptoms.
If any part of your body becomes tired or sore while using the headset or its
components, or if you feel symptoms such as tingling, numbness, burning or
stiffness, stop and rest for several hours before using it again. If you
continue to have any of the above symptoms or other discomfort during or after
use, stop use and see a doctor.
Safe Use Environment
The headset produces an immersive virtual reality experience that distracts
you from and completely blocks your view of your actual surroundings. Always
be aware of your surroundings before beginning use and while using the
headset. Use caution to avoid injury.
Serious injuries can occur from tripping, running into or striking walls,
furniture or other objects, so clear an area for safe use before using the
headset.
Take special care to ensure that you are not near other people, objects,
stairs, balconies, open doorways, windows, furniture, open flames, ceiling fans
or light fixtures or other items that you can bump into or knock down when
using or immediately after using the headset.
Health and Hygiene Caution
Prolonged use should be avoided, as this could negatively impact hand-eye
coordination, balance, and multi-tasking ability.
To reduce the risk of discomfort, adjust the inter-pupillary distance (IPD)
for each user before use of the headset.
Take at least a 10 to 15 minute break every 30 minutes, even if you don’t
think you need it. Each person is different, so take more frequent and longer
breaks if you feel discomfort. You should decide what works best for you. A
comfortable virtual reality experience requires an unimpaired sense of motion
and balance. Do not use the headset when you are: tired; need sleep; under the
influence of alcohol or drugs; hung-over; have digestive problems; under
emotional stress or anxiety; or when suffering from cold, flu, headaches,
migraines, or earaches, as this can increase your susceptibility to adverse
symptoms.
We recommend seeing a doctor before using the headset if you are pregnant,
elderly, have pre-existing binocular vision abnormalities or psychiatric
disorders, or suffer from a heart condition or other serious medical condition.
The headset is worn next to your skin and scalp. Stop using the headset if you
notice swelling, itchiness, skin irritation or other skin reactions. If
symptoms persist, contact a doctor. To avoid transferring contagious
conditions (like pink eye), do not share the headset with persons with
contagious conditions, infections or diseases, particularly of the eyes, skin
or scalp. The headset should be cleaned between each use with skin-friendly
non-alcoholic antibacterial wipes and with a dry microfiber cloth for the
lenses.
User Group
This product should not be used by children under the age of 13.
Adults should make sure children (age 13 and older) use the headset in
accordance with health and safety warnings including making sure the headset
is used as described in the user guide.
Adults should monitor children (age 13 and older) who are using or have used
the headset for any of the symptoms described in these health and safety
warnings (including those described under the Discomfort and Repetitive Stress
Injury sections), and should limit the time children spend using the headset
and ensure they take breaks during use.
VR device is not suggested for old people;
VR device is not suggested for sick people, except for the usage with special
medical guidance;
VR device is not suggested for people with dioptric lower than (0.5).
Interference with Medical Devices
The Headset, Sensor, and Remote contain magnets or components that emit radio
waves, which could affect the operation of nearby electronics, including
cardiac pacemakers, hearing aids and defibrillators. If you have a pacemaker or
other implanted medical device, do not use the headset without first consulting
your doctor or the manufacturer of your medical device. Maintain a safe
distance between the headset and your medical devices, and stop using the
headset if you observe a persistent interference with your medical device.
Operation and Maintenance
Review the hardware and software recommendations for use of the headset. Risk
of discomfort may increase if recommended hardware and software are not used.
The manufacturer shall specify the display technology and specific external
display models for users. The manufacturer shall clearly specify all the
operation menus and controls that user need to adjust to achieve best
performance. The manufacturer shall guide user to wear the HMD in a
comfortable way and how to clean the HMD.
Part Name | Toxic or Hazardous Substances and Elements |
---|
Lead
(Pb)| Cadmium
(Cd)| Mercury
(Hg)| Hexavalent
Chromium(Cr(VI))| Polybrominated
Biphenyls(PBB)| Polybrominated
Diphenyl Ethers(PBDE)| Di-2-ethylhexyl phthalate (DEHP)| Benzyl-n-butyl
phthalate (BBP)| Di-n-butyl phthalate (DBP)| Di-iso-butyl phthalate (DIBP)
PCB| o| o| o| o| o| o| o| o| o| o
Battery| o| o| o| o| o| o| o| o| o| o
Hoursings and Accessories| o| o| o| o| o| o| o| o| o| o
Camera| o| o| o| o| o| o| o| o| o| o
Glass Block| o| o| o| o| o| o| o| o| o| o
Black Translucent Plastic Sheet| o| o| o| o| o| o| o| o| o| o
Transparent Plastic Sheet| o| o| o| o| o| o| o| o| o| o
Triode| o| o| o| o| o| o| o| o| o| o
This table is prepared in accordance with the provisions of 2011/65/EU.
O: Indicates that the concentration of the listed hazardous substance in all
homogeneous materials in this part is below the limit required in 2011/65/EU.
X: Indicates that the concentration of the listed hazardous substance in all
the homogeneous materials in this part is above the limit required in
2011/65/EU. Hazardous substances in the components marked with “X” in the
table cannot be replaced due to limitations of global technological
development.
*Printed circuit board assemblies include printed circuit boards and their electronic and other components. Depending on the product model, the product you purchased may not contain all of the above components.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>