PROLED L7A070xxx Downlight Arena Installation Guide
- June 16, 2024
- PROLED
Table of Contents
Installation manual
PROLED DOWNLIGHT ARENA 75 / 100 / 150 / 200
L7Axxxxx
Characteristics:
- CITIZEN LED Warm White or Neutral White
- Power consumption 11 W (Arena 75), 13 W (Arena 100), 18 / 25 W (Arena 150) or 25 / 38 / 53 W (Arena 200)
- Aluminium housing rund or square
- Ring colour White, Secondary reflector silver, white or black
- Beam angle 20°, 25°, 30°, 50°, 55°, 60° or 70° (depending on luminaire)
- Driver 350mA (Arena 75/100), 500 mA and 700 mA (Arena 150) as well as 700mA, 1050 mA and 1400 mA (Arena 200) constant current (driver not included)
- Dimmable with special 350 mA (Arena 75/100), 500 mA or 700 mA (Arena 150) as well as 700mA, 1050 mA and 1400 mA (Arena 200) constant current dimmer or constant current driver
- Operating temperature range -10° C till +45° C (Arena 200 at 1400 mA only max. 35°C)
- CE compliant with applicable European directives
Warning:
- For indoor use only
- Please ensure that the packaging is disposed of in a safe environment
- If cable is defected, do not use the luminaire
- We do recommend that a qualified electrician should be used to install the products
- Do not look at the lighted lamp directly
Safety indices:
Be sure to have a qualified electrician complete installation. The customer is
not entitled to claim for any lights installed without observing European
safety directives. The manufacturer is then discharged from liability when
damage is caused by improper use or installation. If any luminaire is
subsequently modified, the person responsible for the modification shall be
considered as manufacturer. Do not cover lamps with heatinsulating materials.
For indoor use only.
Protection class IP44.
Installation:
Please follow the sequence of installation step by step. Non-observance can lead to damage of LED.
- Switch off the electricity at the mains before commencing installation or lamp change and (if a fuse box is installed) remove the appropriate circuit fuse to avoid accidental switching on of the mains supply.
- Connect to secondary side of a constant current driver, which is suitable to luminaire (350 mA, 500 mA, 700 mA, 1050 mA or 1400 mA)
- Connect primary side of driver to power supply (230 VAC)
- Make sure all connections are tight with no loose strands
- Ensure fire regulations are not breached when fitting your lights
- If you are in any doubt regarding these instructions, consult a qualified electrician
Please follow the sequence, if not destroying of LED:
Energy efficiency class of the light source:
Products listed in this manual contain a light source of following
efficiency class, listed according to the item codes:
| Item code | Efficiency class of light source |
|---|---|
| L7A070xxx | G |
| L7A150W87 | E E |
| L7A100xxx | F |
| L7A101xxx | F |
| L7A151B87 | F |
E
L7A150B63| F| L7A151S67| F
L7A150B67| F| L7A151S87| E
L7A150B83| E| L7A151W67| F
L7A150B87| E| L7A151W87| E
L7A150S63| F| |
L7A150S67| F| L7A200xxx| F
L7A150S83| E| |
L7A150S87| E| L7A201xxx| F
L7A150W63| F| |
L7A150W67| F| |
ATTENTION:
This product counts as „containing product“ according to directive (EU)
2019/2020 and (EU) 2019/2015.
The light source is part of the containing product. A separation of the light
source and the containing product using commonly available tools is possible
with this product.
Replacement of the light source using commonly available tools is possible
with this product.
The light source can be separated for testing purposes.
Installation and commissioning may only be performed by qualified persons.
National installation regulations must be observed.
Luminiares must be disconnected from mains before any work.
10.22 Technical amendments reserved
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg – Germany
www.proled.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>