IBESTWIN Dimmable LED Ceiling Light User Manual

IBESTWIN Dimmable LED Ceiling Light

Package Contents

Note : Do not include batteries for remote controller, need to buy batteries.

SPECIFICATION

• Shape: Square/Round(depends on your order)
• Material: Plastic
• Type of Bulb: LED
• Energy Efficiency Class: A+
• CRI: >80
• Usage: Indoor
• Lifespan: >20,000 hrs
• Power Source: Corded-electric
• Work Temperature: -4 ℉–+140℉（-20ºC—+60ºC）
• Universal Power Voltage: Permits operation at 85 to 265VAC

Attention Before You Start：
These instructions on wiring and installation are provided as a guideline to assist you. Some experience of electrical wiring and do-it-yourself is required to install the light fitting. If at any time you are unsure of how to proceed, you must consult a qualified electrician.

Please make sure the power is off and remove the appropriate fuse or switch off the appropriate circuit breaker before commencing installation. Ensure that no one else has access that would enable the supply to be inadvertently reconnected before your maintenance work in order to prevent possible shock. READ IMPORTANT SAFETY INFORMATION FIRST BEFORE INSTALLATION.

Prepare for Install

You may receive different shape of LED ceiling light, but the installation is similar, refer related installation method to install. Here we use square led ceiling light as a sample to install. ATTENTION: The led ceiling not only can be installed in Junction Box but also solid ceiling or wooden flat wall top, please refer to related installation methods.
Check the packaging and make sure that you have all the required parts.

The following tools may be required:

• Flat Head Screwdrivers.
• Electric drill and assorted drill bits.
• Wire Strippers.
• Pliers.

Note: The LED ceiling light is no need to connect with ground wire.

If the Class Double Insulated symbol is on the Light Fitting, then the Fitting does not require an Earth, and Live or Neutral must not be connected to Earth. If there is no such symbol the Fitting must be Earthed. The terminal blocks are supplied according to requirements of the fitting.

How to Install

STEP 1
Remove your old light fixture. Remove the led ceiling light base.

STEP 2
Connect the wires with ceiling wires. Straighten the wire ends with pliers before connecting wires. Connect wires with wire nut (Black Wire to Live Wire, White Wire to Null Wire.)

STEP 3
Before Installation.
Attention : when install the square ceiling light, in order to align the ceiling light parallel to wall, please make sure the one side hole of the hole cross of the led ceiling light base is installed vertically to the wall.

STEP 4
Install the light base. You may need a Phillips Screwdriver to do the job. There are two installation methods, you not only can install the ceiling light in the Junction Box but also install it in a solid or wooden flat wall top.

A. Use flat head screws to fix the light base into the Junction Box.
B. Use Pointed Phillips Screws to install light base into solid ceiling or wooden flat wall top.

STEP 5
Align the ceiling light body with base holder and clip the ceiling light body into the base. Rotate the led ceiling light body clockwise by 90 degrees to fit it tight. Installation is finished.

About Light Brightness Adjustment
Please note that light brightness of the led ceiling light only can be adjusted by Remote Control or APP, wall switch can not adjust the light brightness.

Remote Controller Instruction

1. Turn On
   1.1 Turn on ceiling light.
   1.2 With memory function. The AC power supply is uninterrupted, and use remote control to operate, the driver can remember the lighting state before the last turn off.
   1.3 Code matching: long press within 1~3 seconds after the ceiling light is turned on, the light flashes quickly once, indicating that the code is successfully matched.

2. Turn Off
   2.1 Turn off ceiling light.
   2.2 Code clearing: After the light is turned off for 5 seconds and then returned, long press the button within 1~5 seconds, and the light will quickly and slowly change once to indicate successful clearing.

3. Increase Lighting Brightness:
   From 7% to 100% brightness

4. Color Temperature Adjustment:
   From cold light to warm light

5. Mode Switching:
   Daylight Mode (4000K); Leisure Mode(3000K); Working Mode(6000K) Note: Under the three preset lighting modes, you can also use number 3 and 7 button to adjust lighting brightness, number 4 and 6 button to adjust color temperature.

6. Color Temperature Adjustment:
   From Warm Light to Cold Light(Color temperature adjustment range 0%~100%).

7. Reduce Brightness:
   From 100% to 7%

8. Full Brightness Mode:
   100% brightness

9. Semi-bright Mode:
   50% brightness

10. Night Light Mode:
    3000K/7% brightness
    Note : Under the Night Light lighting modes, you can also use number 3 and 7 button to adjust lighting brightness, number 4 and 6 button to adjust color temperature.

11. Cancel Timing Function:
    Press this button and the light will slowly flash once to indicate that the timing function has been canceled.

12. Shut down Timer.
    Press one time for 30 minutes (light flashes once), (press again for 1 hour (light flashes twice)

APP Control Function

The LED Ceiling Light can be controlled by APP.
How to control by APP?

1. Search”LampSmart Pro” APP and download it in the App Store or Google Play.
2. Open the “LampSmart Pro” APP and you will see there is no device yet. Click “+” to add a device.
3. Add device name and select room, then click “ Confirm” to add a device.
4. If want to delete or edit the device name, long press the device card to delete or edit.
5. Pairing: Click or double click the Name Card and open the device control page.
6. Click Pairing Button to pair. You need to click this button within 5 seconds after the lamp is powered on. If the device flashes, it means that the app is successfully paired with the device, and you can control the device by the app.
   Note : Must finish pairing before control device by APP. You need to click Pairing Button within 5 seconds after the Light Fixture is powered off by turning off the wall switch. Please note that it can not pair successfully if you turn off the light by remote controller.

Button Function

Please note that if the led ceiling light you purchased without function, when you click related button, it will not work. Like RGB, if led ceiling light without RGB function, when you click RGB button, led ceiling lighting will not change.

7. Swipe left and right in arrow green areas on the screen can switch color temperature and adjust RGB colors.
8. The upper left is the menu button, click it to open the menu. You can refer to the menu to use the app if the manual is lost.

Caution

1. For indoor use only.
2. For safety, make sure to cut off the power before installation. Please do not modify or exchange the parts of the lamp, to avoid falling and damaging the lamp, electric shock, fire and other accidents.
3. Do not install above high-temperature objects, and do not install directly above objects such as stoves, gas, exhaust pipes, etc., to avoid damage.
4. Do not use it in parallel with dimmers and frequently switch electrical appliances (such as induction light switches, etc.). This lamp is a non-dimmable product, please do not connect the dimming.
5. To avoid any damage to the lamp, please do not use chemical solvent during routine maintenance.
6. When the lamp is abnormal, please cut off the power immediately and ask a professional to check and repair it.
7. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
8. Account for small parts and destroy packing material, as these may be hazardous to children.

CLEANING & MAINTENANCE

CAUTION : Be sure fixture temperature is cool enough to touch. Do not clean or maintain while fixture is energized.

1. Wait 10 minutes to cool before replacing, adjusting or cleaning.
2. Clean led ceiling fixture light with dry cloth only. Do not use liquid or abrasive cleaners on this product.
3. Do not open fixture to clean the LED. Do not touch the LED.

FAQ

1. Which kind of remote is it- IR/RF/other?
   A1: It is 2.4G RF.

2. Can universal remote controller control the dimmable led ceiling light?
   A2: No, it can’t.

3. If 4 led dimmable ceiling lights on the same circuit switch, can it operate 4 lights with only one remote control?
   A3: No, it can’t, as it does not have concatenation function.

4. Why the remote controller can not control the ceiling light?A4: Please do a pairing. Turn off ceiling light by wall switch and turn on ceiling light after 5s , long press the “Turn On” button in the remote controller, and the light will be flashed once if pair successfully.

5. When using the APP control, the light does not flash and can not be paired,what should do?
   A5: Open the APP, before pairing, turn off the ceiling light by wall switch, then turn on the ceiling light by the wall switch.
   Click the pairing button in the APP within 5s after turning on the light. (Note: You cannot use the remote control to turn off the light directly when the light is powered on during pairing, because the pairing will be unsuccessful)

6. Why the ceiling light can not remember the setting?
   A6: The dimmable led ceiling light has memory function. Please note that light brightness of the led ceiling light only can be adjusted by Remote Control or APP, wall switch can not adjust the light brightness.
   And wall switch only can change the light color temperature and it can remember the light color temperature when the color changing time is over 15s.

7. Why the led ceiling light is so hot after working?
   A7: The output current of the 36W led ceiling light is relatively large, and it is normal to heat up. Usually, the led works in the environment of 60-65 degrees Celsius (140-149 degrees Fahrenheit) will be ok.

8. LED Ceiling Light does not come on or no longer comes on?
   A8: Make sure main power breaker and power supply is ON. And check all wiring and all connections, make sure connection is no problem. If it still can not work, maybe it is defective or broken, please contact customer service. We stand behind of our products, will take responsibility of it.

3 YEARS WARRANTY

This product is warranted being free from defects in materials and workmanship when installed and used under normal operating conditions for a period of 3 years from date of purchase. This warranty covers all component parts and extends only to replacement of defective ceiling light or components; it does not cover failure due to improper installation, misuse, mishandling.
If product can not work within 3 years, we will replace you or send you full refund. Have any problems, please contact our support team by Amazon orders.

Website : ibestwin.net
E – mail : xu@ibestwin.net

References

• ibestwin.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>